Fire Stopping in Chartham
Looking for fire stopping in Chartham? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Seals disturbed by maintenance and left open
- Openings left by services added after handover
- Openings found when ceilings come down for a refit
Fire stopping near Chartham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Chartham
Facilities managers in Chartham often find open service penetrations when ceilings come down for other work. If a specification already covers those walls and floors, we can reseal to it, matching the product and detail it names. With no specification in place, the first step sits with your designer or fire engineer, not with us. If you’re dealing with old intumescent sealant that has split away and unsealed openings around new pipes and cables, we can help, on cable penetrations, linear gaps at wall heads and pipe penetrations alike. For commercial sealant work in Chartham, you deal with one contact from quote to sign-off, whether it’s one building or several.
Rural conversions around Chartham can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Place
- Chartham (CT4)
- Region
- Kent
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
General trades versus a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Common questions from Chartham clients
What happens to BS 476 references for fire stopping in Chartham?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Is Chartham too small for you to travel to?
Not at all: smaller places are covered as well as towns. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
How much does the work cost?
There isn’t a price list, because every site is different. With photographs or drawings, we can give you a fixed quote.
Can you fit around our working hours?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
How many days will you need on site?
It depends on the scope, though a typical visit usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we’ll set out a timescale with the quote.
How soon can the area be used again?
We will confirm how long the chosen product needs to cure.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
What we can’t put right
Some faults sit outside our scope, and we say so rather than covering them up:
- Large openings beyond what any sealant detail covers
- Signing off or certifying a building’s fire stopping
- Fire doors, dampers or other fire safety equipment
If you’re not sure, just give us a call on 01277 525 020 or email us and we’ll give you a straight answer.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
Diagnose, treat, sign off
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For work around Chartham, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Flag any permit to work we’ll need
- Move anything stored against the joints
- Send your site hours and access windows
Quotes
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Related advice
Nearby places to Chartham
More services for Chartham
Quoting for work in Chartham
We price every job individually. The things that drive the figure:
- How accessible the joints are
- Travel to remote or island sites
- Site requirements such as inductions and permits
- How much there is to seal
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
Sending details for a quote
There’s no need for a formal survey. A few details are enough to get going:
- The type of building and who uses it
- Any specification or named product
- Access details, including height
- Approximate linear metres or a joint schedule
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Why it’s worth doing now in Chartham
Open service penetrations matter on ordinary days, not just in a fire: they also carry noise, draughts and smells between rooms. The specified fire seal closes the gap for all of these and the building feels the difference. Converted and older buildings near places like Chartham tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why us?
- Old sealant cut out, never sealed over
- One contact handling all your sites
- Work to your specification and the manufacturer’s guidance
- Constructionline member for supplier checks
Read what affects the cost or our accreditations.
Compartments and services around Chartham
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Either way, we install the specified product to its tested detail. At about 51 miles from central London, Chartham is within reach of the capital. Office refits around the commuter belt bring new cabling through fire-resisting walls.
Older community buildings such as Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Hotels such as Howfield Manor Hotel (0.9 miles north-east of Chartham) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified.
Chartham is about 3 miles south-west of Canterbury, in Kent. If you’re looking for fire stopping in Chartham, we can help, as we do across Kent. Chartham is one of 931 places we cover in Kent for service penetrations. We also cover London, around 51 miles from Chartham.
If you need fire stopping in CT4, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Station Road, River Court and The Green or nearby, we can quote for service penetrations. We also cover Shalmsford Street (1 mile south), Mystole (1 mile south-west), Chartham Hatch (1 mile north), Garlinge Green (2 miles south) and Thanington (2 miles north-east). Further afield, our area takes in Ashford (10 miles south-west), Canterbury (3 miles north-east), Dover (15 miles south-east), Sittingbourne (14 miles north-west), Folkestone (14 miles south-east) and Whitstable (7 miles north).
Local landmarks in Chartham
Locally, jobs take us to sites close to No Man's Orchard and The Artichoke Inn. Chartham has its own railway station: Chartham station. Nearby you will also find Chilham Castle (2.7 miles west) and Whitefriars Shopping Centre (3.1 miles north-east). Not far away are Blean Woods RSPB Reserve.
Do you need fire stopping in Chartham?
Physical damage is another reason seals stop doing their job. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe, and the repair is often skipped.
It’s worth sending us details if you spot any of the following:
- Fire-rated sealant that has cracked or shrunk back
- Open linear gaps along the top of fire-resisting walls
- Fire stopping installed outside its tested range
- Fire seals cut back for extra cables and never reinstated
Residences at universities like University of the Creative Arts, 3.3 miles north-east of Chartham, have compartment walls that must be resealed whenever services change.
Comparing quotes
- Their pre-qualification and accreditations
- How the existing material will be dealt with
- Proof of insurance
- Will RAMS and insurance details be available?