Fire stopping in Carnbo
Fire-rated and intumescent sealing of service penetrations and linear gaps in Carnbo and across Perth and Kinross. CHAS accredited and fully insured, with a 12-month guarantee.
- Old intumescent sealant that has split away
- Hidden openings found during inspections
- Seals that don’t match their tested detail
Fire stopping across Carnbo
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
From enquiry to sign-off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before we move to the next. Where we can, we combine work around Carnbo with other jobs nearby. Let us know if your dates have any give.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Confirm the product named in the specification
- Explain the parking and delivery arrangements
- Agree which areas must stay open
Request a quote
To get a fixed quote, speak to us on 01277 525 020 or email a schedule or drawings, telling us the site location and the nature of the job. Our quote form is another easy route.
Advice
Fire stopping in Carnbo
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. We work to the product’s tested detail for every seal, not a rule of thumb. Site teams most often ask us about fire stopping installed outside its tested range and service penetrations left open after M&E works, on linear gaps at wall heads, pipe penetrations and small duct penetrations where the tested detail allows. A single leaking joint is often how a building in Carnbo first comes to us: we look at the rest while we are there and tell you what we find.
Travel to smaller places like Carnbo is planned so every penetration is sealed on one trip. Send the specification and photos of the openings, with sizes if you have them.
We stand behind the joints we seal with a 12-month guarantee. That covers our preparation and application.
- Place
- Carnbo (KY13)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Carnbo
More services for Carnbo
Your questions answered
How do Scotland’s building standards affect fire-rated sealant in Carnbo?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Will you design a fire-stopping scheme for our building in Carnbo?
No. Fire-stopping design and sign-off belong to the designer, principal designer, fire engineer or building control. We install what’s specified, to the product’s tested detail.
Is your workmanship covered by a guarantee?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so we will ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
How do I request a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
How long before the joints can be used?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Should maintenance staff do it?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
How the job changes by surface
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest against the detail’s limits.
Commercial clients in Carnbo
Hotels, schools, healthcare sites, offices and retail units book us directly too. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Quoting for work in Carnbo
What shapes the price:
- Site requirements such as inductions and permits
- The size and state of each joint
- How much there is to seal
- Whether the work must be split into stages
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- The site address and postcode
- Your programme or deadline
- Access details, including height
- Whether the building will be occupied during the work
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or email a schedule or drawings with what you know.
Fire stopping around Carnbo: points for this area
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with products tested for that end use. Our part is installing the specified fire-rated sealant to its tested detail.
For buildings in and around Carnbo, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail. Wherever the building is near Carnbo, design and sign-off of fire stopping sit with the designer, fire engineer or building control; we install what has been specified.
Carnbo is about 10 miles north of Dunfermline, in Perth and Kinross. Commercial clients in Carnbo use us for work on service penetrations, as part of our coverage of Perth and Kinross. Our Perth and Kinross coverage takes in 114 places, large and small. We also cover Edinburgh, around 22 miles from Carnbo.
We cover the KY13 postcode districts for service penetrations. We also cover Crook of Devon (2 miles south-west), Balado (3 miles east), Rumbling Bridge (3 miles south-west), Pool of Muckhart (4 miles south-west) and Kinross (4 miles east) for service penetrations. Further afield, our area takes in Perth (13 miles north), Auchterarder (9 miles north-west), Letham (13 miles north), Scone (15 miles north), Tulloch (14 miles north) and Oakbank (13 miles north).
Landmarks near Carnbo
A little further out are Cleish Castle (3.6 miles south-east). Green spaces nearby include Loch Glow and Innerdouny Hill.
Keeping the joints sound
Cleaning and maintenance staff play a part too. Share these points with them:
- Look above ceilings when tiles are lifted for other jobs
- Ask the designer to confirm details early on refits
- Keep product data and details in the fire safety file
- Foam or ordinary sealant is never a fire-seal repair
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail using the same product.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small; found late, it can be one of many.