Fire-rated sealing and fire stopping in Caring, Kent
Fire-rated and intumescent sealing of service penetrations and linear gaps in Caring and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Expanding foam used as fire stopping
- Fire sealant pulled out of the opening
- Snag lists that include open service penetrations
Need fire stopping in Caring?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
From enquiry to sign-off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. If others near Caring need work, visits can be combined. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Point out any areas we must not close
- Warn occupants and staff about the work
- Tell us what induction or permit system the site runs
Quotes
To get a fixed quote, call the office on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
Advice
How we handle fire stopping in Caring
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in. We work on service gaps in risers, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and the failures we are asked to look at most are old intumescent sealant that has split away and hidden openings found during inspections. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Caring, that means joint design, primers and backing rod as standard.
Rural conversions around Caring can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Caring (ME17)
- Wider area
- Kent
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail, though larger ones normally call for a collar or wrap. We check the pipe material and diameter against the detail before we start.
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. Each gap is measured where it is widest against the detail’s limits, and any that don’t are flagged.
Caring: questions and answers
Can work in a care setting near Caring go ahead while residents are there?
Yes. Care settings are planned area by area, at times agreed with the home. We follow the home’s own procedures throughout.
Do you seal service penetrations in hotels around Caring?
Yes, where fire-rated sealant is the specified product. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
When can the area be used after sealing?
Curing time varies by product, and we confirm it on the day, and flag anything to keep off until it has cured.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
What if there’s asbestos in the old mastic?
Managing asbestos is the dutyholder’s responsibility, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Honest limits
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is one of these:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Construction that lacks the fire resistance the seal relies on
- Reviewing a building’s overall fire safety
Not sure which it is? You can speak to us on 01277 525 020 or email us and we will tell you honestly.
Where we work in Caring
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Linear gaps at wall heads
Fire stopping in Caring: the local picture
Caring has several hotels close by, all within 2 miles. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product. There are two care or nursing homes within about 2 miles of Caring. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
Industrial units on estates such as Park Wood Trading Estate, 1.7 miles south-west of Caring, often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal. At a university such as Canterbury Christ Church University, which lies east of Caring, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. For a site team at a college like Kent Police College, which lies west of Caring, fire-rated sealing is best scheduled after the summer works.
Caring is about 3 miles east of Maidstone, in Kent. We cover Caring, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Caring is one of 931 places we cover in Kent. Sites around London have their own page, roughly 34 miles from Caring.
Postcode districts covered here: ME17. Buildings on Caring Lane and Caring Road are within our area for service penetrations. We also cover Otham (1 mile south-west), Bearsted (1 mile north-west), Langley (1 mile south), Langley Heath (1 mile south) and Willington (2 miles west). Further afield, our area takes in Maidstone (3 miles west), Ashford (14 miles south-east), Sittingbourne (9 miles north-east), Gravesend (15 miles north-west), Tonbridge (14 miles west) and Faversham (13 miles east).
Landmarks near Caring
Recent enquiries here include premises near The Orchard Spot Public House, among other places. Caring’s nearest station is Bearsted station, roughly 1.5 miles north-west of the centre. Other landmarks nearby include The Mall Maidstone (3.1 miles west) and Laundry Museum (1.4 miles east). The countryside around Caring includes Detling Hill.
Aftercare for building managers
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Check risers and ceiling voids after each round of works
- Flag new cables with no seal around them
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Arrange inspection before areas are covered up
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job; found late, it can be one of many.
Nearby places to Caring
Other services in Caring
What sets the cost
Each job is priced on its own details. The main factors are:
- Specialist products, such as fire-rated or hygienic sealants
- Quantities, in metres or numbers
- Any access equipment needed
- Removal of failed or old sealant
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- The product your specification calls for
- Where the site is, with the postcode
- How the joints are reached, and at what height
- Clear photographs of the problem areas
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or give us a call on 01277 525 020 or email a schedule or drawings to discuss it first.