Fire-rated sealing and fire stopping in Hales Place, Kent
Sealant work in Hales Place for main contractors, managing agents and facilities managers: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Openings found when ceilings come down for a refit
- Fire stopping installed outside its tested range
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for businesses in Hales Place
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Our process
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For a site in Hales Place, we plan so the whole job is done in one go where possible. Clear photos and measurements help us bring the right products.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Have the specification and drawings to hand
- For older buildings, check the asbestos register before work
Ask for a quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or email drawings and photos to discuss it first.
Related advice
Fire stopping for commercial buildings in Hales Place
Facilities managers in Hales Place often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it using the product and detail it sets out. Where there isn’t one, the designer or fire engineer needs to set one first. The enquiries we see most involve old intumescent sealant that has split away and non-fire-rated filler around services, across joints between fire-resisting walls and floors, cable penetrations and pipe penetrations. For commercial sealant work in Hales Place, you deal with one contact from quote to sign-off, whether it’s one building or several.
Around smaller places like Hales Place, many commercial buildings are conversions or extensions of older ones, so it’s worth confirming the wall or floor type before choosing the seal. The right product depends on the wall or floor and the services passing through, and we will tell you if the detail calls for something other than sealant.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Hales Place (CT2, CT1)
- Wider area
- Kent
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Also near Hales Place
Also in Hales Place
Questions we are asked in Hales Place
Is Hales Place too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Would you work within a site like Saint Martin's Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Can the sealant be colour-matched?
It depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
How do you choose the sealant?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How do we ask for a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photographs and a postcode.
What do BS EN 1366-3 and BS EN 13501-2 mean?
Penetration seals are tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4. Classification follows BS EN 13501-2. The rating applies to the product as tested.
What sealant work can’t fix
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:
- Signing off or certifying a building’s fire stopping
- Writing the fire-stopping specification
- Plastic pipes whose detail calls for a collar or wrap
If you’re not sure, just ring 01277 525 020 or email the details over and we’ll give you a straight answer.
Joints and surfaces we work on
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
For managing agents and facilities managers
Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Hales Place. Several sites can go on one quote, which keeps the paperwork simple.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
How the quote is worked out
These are the things that shape the price:
- Joint width, depth and condition
- Quantities, in metres or numbers
- Specialist products, such as fire-rated or hygienic sealants
- Location, for remote and island sites
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
What to include in your enquiry
Whether it’s one area or a whole building, the same details help:
- A wide shot and a close-up of the area
- Anything awkward about access or site hours
- The product your specification calls for
- The site address and postcode
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. If you have questions first, give us a call on 01277 525 020 or email the details over.
Fire stopping around Hales Place: points for this area
Four care or nursing homes sit less than 2 miles from Hales Place. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. The area within 2 miles of Hales Place holds a good number of hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
For a unit at a site such as Maybrook Retail Park, 1 mile east of Hales Place, any new service through a fire-resisting wall should be sealed to the tested detail. For a site team at a college like Canterbury College (1.4 miles south of Hales Place), fire-rated sealing is best scheduled after the summer works.
Hales Place is about 1 mile north of Canterbury, in Kent. We send applicators to Hales Place for service penetrations. Hales Place is one of 931 places we cover in Kent for service penetrations. For work in that direction, see our London page.
Anyone looking for fire stopping in CT2 and CT1 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Among the streets we cover are Downs Road, Godden Road and Tunstall Road. We also cover Canterbury (1 mile south), Harbledown (1 mile south-west), Rough Common (1 mile west), Wincheap (2 miles south) and Upper Harbledown (2 miles west) for service penetrations. A short drive away, we cover Ashford (14 miles south-west), Margate (14 miles north-east), Dover (14 miles south-east), Sittingbourne (15 miles west), Folkestone (15 miles south) and Ramsgate (15 miles east).
Around Hales Place
Recent enquiries here include premises near Archbishop's School, St Thomas of Canterbury Church and St Edmund's School. Nearby too are Ye Olde Beverlie Inn (less than half a mile south) and Bus Company Island (0.8 miles south). The closest station to Hales Place is Canterbury West station, roughly 0.8 miles south of the centre. A little further out are Whitefriars Shopping Centre (1.2 miles south) and Canterbury Castle (1.4 miles south). Open spaces near Hales Place include Blean Woods RSPB Reserve.
Common problems we fix in Hales Place
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position.
Site and facilities staff are often the first to spot these:
- Expanding foam used as fire stopping
- Openings found when ceilings come down for a refit
- Old intumescent sealant that has split away
- Penetration schedules that need working through
Wherever services are added at a hospital such as Saint Martin's Hospital, 1.7 miles south-east of Hales Place, the compartment line has to be made good with the specified product.
What to look for in a quote
- The named product and why it was chosen
- What site paperwork they can supply
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How they’ll work around occupants
Maintenance after handover
To get the most from the new sealant:
- Report damaged or disturbed seals as soon as they’re spotted
- Keep general-purpose fillers away from compartment walls
- Check risers and ceiling voids after each round of works
- Brief every trade that openings they make must be sealed
After the work, brief anyone else working in the area that the openings are now sealed. If a seal has to be opened for a new service, it should be reinstated to the same detail.
A simple record of seal locations and products helps. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.