Fire-rated sealing and fire stopping in Cambus, Clackmannanshire
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Cambus. Send details for a fixed quote.
- Expanding foam used as fire stopping
- Unsealed openings around new pipes and cables
- Old intumescent sealant that has split away
Fire stopping near Cambus
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
When to bring in a specialist
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
About our fire stopping in Cambus
It helps to set out our role at the start. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. What we bring is careful installation of the specified sealant, to the maker’s guidance on buildings around Cambus. If you’re dealing with fire stopping installed outside its tested range and builders’ foam or ordinary silicone in compartment walls, we can help, whatever the surface. Searching for sealant specialists in Cambus? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Hotels and care homes around smaller places like Cambus often have services added during refurbishment. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Work we carry out in Clackmannanshire comes with a 12-month guarantee. Should something we installed fail, give us a call on 01277 525 020 or email us and we will come back to it.
- Where
- Cambus (FK10)
- Wider area
- Clackmannanshire
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
FAQs: Cambus
Do you cover business parks and estates near Cambus, such as Bandeath Industrial Estate?
Yes. Estates, retail parks and business parks around Cambus, Bandeath Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
Can work at a site such as University of Stirling fit around teaching?
Yes, holiday working periods are the norm on campus jobs. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
How much does the work cost?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we’ll price it properly.
How long does a typical visit take?
That varies with the scale of the job, but the work normally takes a single visit for a short list of penetrations, or a phased programme for a whole building. For bigger or phased jobs, we will set out a timescale with the quote.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
How do you deal with asbestos in old sealant?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. Work pauses if suspect material is found, until it has been tested.
Compartment walls and floors in Cambus
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified. A 2-mile radius around Cambus takes in several hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
Wherever services are added at a hospital such as Stirling Health and Care Centre (3.8 miles west of Cambus) the compartment line has to be made good with the specified product. On estates like Bandeath Industrial Estate (1.3 miles south of Cambus), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal. At a college such as Forth Valley College - Alloa Campus, which lies east of Cambus, checking penetration seals after summer M&E works is good practice.
Cambus is about 2 miles west of Alloa, in Clackmannanshire. Looking for fire stopping in Cambus? We can help, as we do across Clackmannanshire. Across Clackmannanshire, 13 places are covered, Cambus among them. Glasgow is covered too, around 25 miles from Cambus.
Work on service penetrations is covered throughout FK10, for business premises of every kind. Buildings on Station Road, Main Street and Moubray Gardens are within our area. Sites close to Cambus are covered too, including Tullibody (1 mile north-east), Menstrie (2 miles north), Manor Powis (2 miles west), Fallin (2 miles south-west) and South Alloa (2 miles south-east). A short drive away, we cover Tillicoultry (4 miles north-east), Dollar (7 miles east), Clackmannan (4 miles east), Sauchie (3 miles east) and Coalsnaughton (4 miles east).
Around Cambus
In Cambus, that means premises near Dunmar House Hotel. Cambus’s nearest station is Alloa station, about 2.2 miles east. Nearby you will also find Stirling Health and Care Centre (3.8 miles west) and Tullibody Heritage Museum (under half a mile north-east). Open spaces near Cambus include Myreton Hill and Black Devon Wetlands RSPB Reserve.
When it isn’t the sealant
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Deciding what a wall or floor needs, which belongs to the designer
- Fire doors, dampers or other fire safety equipment
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just call the office on 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Where we work in Cambus
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Small duct penetrations where the tested detail allows
Nearby places to Cambus
Also in Cambus
Work for main contractors and building owners
Hotels, schools, healthcare sites, offices and retail units book us directly too. We plan around the way the building is used, so the building keeps working while we do.
If you look after buildings for someone else, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Quoting for work in Cambus
A fixed quote reflects the actual work. It allows for:
- The size and state of each joint
- Location, for remote and island sites
- How much existing material needs removing
- Induction, permit and paperwork requirements
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a fixed quote when you’re ready.
What we need to price the job
It doesn’t need to be a full survey. These details are enough to start:
- Photos of the joints, close up and from further back
- Rough lengths or quantities, or drawings if you have them
- The site address and postcode
- The asbestos register, for older buildings
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
From enquiry to sign-off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. For work around Cambus, we aim for one trip, so photos, sizes and a full list matter. External joints need a dry spell as well.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Point out parking and an unloading spot
- Confirm the product named in the specification
- Let building users know which areas are affected
Quotes
For a fixed quote, ring 01277 525 020 or send details through our quote form. Our quote form is another easy route.
Read more
How the job changes by surface
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe. We follow whatever the detail requires and flag anything we can’t match.
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in, along the full length of the run.