Fire-rated sealing and fire stopping in Broad Tenterden, Kent
Looking for fire stopping in Broad Tenterden? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Expanding foam used as fire stopping
- Fire seals cut back for extra cables and never reinstated
- Openings left by services added after handover
Fire stopping in Broad Tenterden
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Broad Tenterden
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We don’t hold a third-party fire-stopping installer certificate, and we won’t pretend otherwise. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. The enquiries we see most involve openings found when ceilings come down for a refit and expanding foam used as fire stopping, on joints between fire-resisting walls and floors, service gaps in risers and linear gaps at wall heads. For commercial sealant work in Broad Tenterden, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For a smaller site near Broad Tenterden, we plan to do all the penetrations in one go, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
Work we carry out in Kent comes with a 12-month guarantee. If an installation problem shows up, call 01277 525 020 or send details through our quote form and we’ll arrange a return visit.
- Where
- Broad Tenterden (TN30)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
On arrival, we sign in, go through any site induction and check how permits are handled. Everything around the joints gets protected before any cutting starts, with the work itself usually taking anything from one day to a planned run of visits, depending on the number of seals and the access. Jobs in and around smaller places like Broad Tenterden are typically planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Point out parking and an unloading spot
- Warn occupants and staff about the work
- Flag any permit to work we’ll need
Getting a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or email the details over.
Read more
Places near Broad Tenterden
What else we do in Broad Tenterden
Different surfaces, different methods
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on, so we check each one.
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Keeping the joints sound
To get the most from the new sealant:
- Report damaged or disturbed seals as soon as they’re spotted
- Put resealing into every M&E and fit-out package
- Have penetrations checked while they can still be seen
- Agree the fire-stopping specification before services go in
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
Ask every contractor who works in risers or voids to report openings they create. It costs little and catches breaches early.
What sets the cost
We price every job individually. The things that drive the figure:
- Travel to remote or island sites
- Any access equipment needed
- The product specified
- Joint width, depth and condition
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Send us:
- The asbestos register, for older buildings
- When you need the work done
- Any specification or named product
- Access details, including height
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.
Site staff or a sealant specialist?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Broad Tenterden: questions and answers
Do you cover business parks and estates near Broad Tenterden, such as Pickhill Business Centre?
Yes. Our area takes in Broad Tenterden and its surroundings, with estates and business parks such as Pickhill Business Centre included. To start, just phone 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Broad Tenterden too far out for you?
No. Places such as Broad Tenterden are covered as much as the big towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Which standards are fire seals tested to?
BS EN 1366-3 covers penetration seals and BS EN 1366-4 covers linear joints. Results are classified under BS EN 13501-2. The rating applies to the product as tested.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Will you write the fire-stopping specification?
No, that isn’t our role. With the designer’s details in hand, we can price the sealant elements, and tell you if a detail needs another product.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Is the BS 476 change in 2029 relevant to fire stopping?
It mainly affects England, where Approved Document B is dropping its BS 476 references from 2 September 2029. Classification to BS EN 13501-2 becomes the expected evidence. In Scotland, the Technical Handbook sets its own guidance, including clause 2.1.14 on service penetrations.
Penetration seals near Broad Tenterden
In England, Approved Document B covers fire stopping of openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. The area within 2 miles of Broad Tenterden holds several hotels. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
For a hospital such as West View Hospital (0.8 miles west of Broad Tenterden), penetration sealing is typically phased ward by ward, with infection-control rules agreed first. In a hotel such as The White Lion Hotel, 0.6 miles to the north-west of Broad Tenterden, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Holiday works at schools like Tenterden Church of England Junior School often leave service openings to seal before pupils return.
Broad Tenterden is about 9 miles south-west of Ashford, in Kent. Across the TN30 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Broad Tenterden is one of 931 places in Kent on our list. Our Brighton page has more on work in that area (39 miles or so).
If you need fire stopping in TN30, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Smallhythe Road and Small Hythe Road are within our area. If your building is just outside Broad Tenterden, we cover Tenterden (1 mile north), Small Hythe (1 mile south), St Michaels (2 miles north), Strood (2 miles west) and Parkgate (2 miles north-west). Further afield, our area takes in Ashford (9 miles north-east), Paddock Wood (15 miles north-west), Bearsted (15 miles north), Park Wood (14 miles north-west), Kennington (11 miles north-east) and New Romney (12 miles south-east).
Near you in Broad Tenterden
We work on buildings around The Vine Inn, Turners Field and Homewood School and Sixth Form Centre, among other places. Nearby you will also find Benenden Hospital (3.8 miles north-west) and Tenterden and District Museum (0.7 miles north-west).
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.