Expansion Joint Sealing in Broad Tenterden
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Broad Tenterden and the surrounding area. Send photos or drawings for a fixed quote.
- Rain penetration at brick or block movement joints
- Hardened, cracked sealant on exposed facades
- Joints where the bead has lost adhesion
Expansion joint sealing in Broad Tenterden
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Maintenance after handover
Problems stay small when the joints are checked regularly. In particular:
- Act on the first tear or lifting edge rather than waiting
- Keep stones and debris out of open joint lines
- Leave barriers in place until fresh joint sealant has cured
- Raise snow-clearing blades over deck joints where possible
Fresh joint sealant needs its full cure time before it takes traffic or water. How long that takes depends on the product, the temperature and the depth of the joint, and we confirm it for each area before we leave. Keeping the area coned off until then avoids tyre marks and damage.
When one joint fails, others of the same age are rarely far behind. It pays to check every joint, not just the obvious one so you can prioritise and budget. We will tell you which movement joints need doing now and which can wait.
Expansion joint sealing in Broad Tenterden, done properly
Joints in car park decks and ramps are among the hardest-working in any building. Tyres load the edges, and de-icing salts and water work into any gap, so failed seals soon lead to leaks onto the level below and broken edges. We reseal deck and ramp joints with a trafficable sealant chosen for the movement and the work can be phased so parts of the car park stay open. We work on blockwork control joints, brickwork movement joints and cladding panel joints, and the usual reasons a site gets in touch are rain penetration at brick or block movement joints and sealant pulling off the joint face. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Broad Tenterden is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places such as Broad Tenterden, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Broad Tenterden (TN30)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Common questions from Broad Tenterden clients
Is Broad Tenterden too far out for you?
No. Places such as Broad Tenterden are covered as much as the big towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Do you take on work at healthcare sites like West View Hospital?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
What if the joint edges are damaged?
Broken arrises have to be put right before resealing. A bead on a broken edge soon lets go.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
How do we ask for a quote?
The quote form is the simplest route, though you can also call the office on 01277 525 020 or send details through our quote form. Photos, drawings or a joint schedule help us quote quickly.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
General trades versus a specialist
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Quoting for work in Broad Tenterden
Quotes vary with the job. It mainly depends on:
- Distance, for remote addresses
- The size and state of each joint
- Which sealant the job calls for
- Phasing around occupants
Pricing movement joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Details that help us quote
Diagnosis starts before we arrive. Let us know:
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- Specification clauses that apply
For a fixed quote, give us a call on 01277 525 020 or send details through our quote form, telling us the site location and the nature of the job. Our quote form is another easy route.
Different surfaces, different methods
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces priming where the maker calls for it.
Brickwork and blockwork joints
Long brick and block elevations have movement joints at intervals. They take a low-modulus sealant with a movement class to suit, with backing rod setting the depth.
Signs you need expansion joint sealing in Broad Tenterden
When the movement exceeds the sealant’s capability, the bead tears. A joint that’s too narrow for the movement, or a product with the wrong movement class, will split through the middle. Resealing like for like often fails the same way unless width and product are reviewed.
Look out for the following:
- Debris jammed in movement joints
- Previous reseals laid over old sealant
- Damp inside where a wall movement joint has failed
- Weathered movement joint sealant that no longer flexes
Parks like Pickhill Business Centre, 0.5 miles to the south of Broad Tenterden, combine paved areas, car parks and building elevations, each with joints that move.
What to look for in a quote
- Whether primer will be used where the manufacturer specifies it
- Who will actually carry out the work
- Is the sealant right for the movement and the substrate?
- Their public liability cover
Expansion joint sealing in Broad Tenterden: the local picture
Broad Tenterden sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint. The 3 miles around Broad Tenterden take in two named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Another example is Business Park, 2.3 miles north-west of Broad Tenterden, where floors and yards would be done in stages around the occupiers. Schools like Tenterden Church of England Junior School often have long brick elevations with movement joints that age quietly.
Broad Tenterden is about 9 miles south-west of Ashford, in Kent. Looking for expansion joint sealing in Broad Tenterden? We can help, as we do across Kent. Across Kent, 931 places are covered, Broad Tenterden among them. There’s a separate page for Brighton, roughly 39 miles from Broad Tenterden.
We cover the TN30 postcode districts for movement joints. For a building on Smallhythe Road and Small Hythe Road or nearby, send details and we will quote for movement joints. We also cover Tenterden (1 mile north), Small Hythe (1 mile south), St Michaels (2 miles north), Strood (2 miles west) and Parkgate (2 miles north-west). Bigger towns within reach include Ashford (9 miles north-east), Paddock Wood (15 miles north-west), Bearsted (15 miles north), Park Wood (14 miles north-west), Kennington (11 miles north-east) and New Romney (12 miles south-east).
What’s near Broad Tenterden
In Broad Tenterden, that means premises near The Vine Inn, Turners Field and Homewood School and Sixth Form Centre and the streets around them. A little further out are Benenden Hospital (3.8 miles north-west) and Tenterden and District Museum (0.7 miles north-west).
How a job runs
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access, and our waste is bagged and taken away as we go. For work around Broad Tenterden, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- The failed seal is removed and both faces are cleaned until sound and dry, flagging any broken edges that need repair before sealing.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Tell us your opening times and when work is allowed
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
Quotes
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.