Fire stopping in Bridgefoot
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Bridgefoot. Send details for a fixed quote.
- Service penetrations left open after M&E works
- Open linear gaps along the top of fire-resisting walls
- Fire-rated sealant that has cracked or shrunk back
Fire stopping in Bridgefoot
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping in Bridgefoot, done properly
A fire-rated sealant is only one part of a tested system: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. We work on linear gaps at wall heads, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows, and what we’re called in for most is penetration schedules that need working through and service penetrations left open after M&E works. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Bridgefoot it comes down to the same thing: the right product in a properly prepared joint.
Around smaller places such as Bridgefoot, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Bridgefoot (DD3)
- Wider area
- Angus
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
What the job involves on each surface
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables, so we check before sealing.
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. We follow whatever the detail requires and flag anything we can’t match.
Common problems we fix in Bridgefoot
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Movement in the frame or slab can open the joint, and a product not tested for that movement may crack. The tested detail for a linear joint states the width and movement it covers.
It’s worth sending us details if you spot any of the following:
- Fire seals cut back for extra cables and never reinstated
- Fire stopping installed outside its tested range
- Builders’ foam or ordinary silicone in compartment walls
- Head-of-wall gaps with no fire seal
Tenant changes at centres like Kingsway West Retail Park (to the south-east of Bridgefoot) often mean new services through walls between units.
What to look for in a quote
- Is the sealant right for the movement and the substrate?
- The terms of the workmanship guarantee
- Their pre-qualification and accreditations
- How the joint faces will be prepared and primed
What else we do in Bridgefoot
FAQs: Bridgefoot
Is Bridgefoot too small for you to travel to?
Not at all. Bridgefoot is within our area. We work across every Scottish council area. Where we can, we group nearby jobs to make the most of each trip.
Can work at a site such as Abertay University fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Send details for a fixed quote.
Will you write the fire-stopping specification?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
Can you quote from photos?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
Can one quote cover more than one building?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Do you approve fire stopping for building control?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. Our part is fitting the specified product to its tested detail.
Why it’s worth doing now in Bridgefoot
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Bridgefoot before they leak.
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why us?
- Constructionline member
- Joints cleaned back to sound surfaces
- 12 months’ guarantee on every job
- Work to your specification and the manufacturer’s guidance
Take a look at how commercial sealant jobs are priced and how we’re accredited.
Diagnose, treat, sign off
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Travel to smaller Scottish places like Bridgefoot is planned so the job is finished in one visit where possible, so photos, sizes and a full list matter. Outside work also needs a suitable weather window.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Make sure the joints can be reached
- Share the asbestos register for older buildings
- Confirm the product named in the specification
Get a fixed quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Related advice
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Get seals inspected before ceilings and boxing close
- Treat an open penetration as a priority repair
- File the specified details where the next contractor can find them
- Check risers and ceiling voids after each round of works
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail.
Make reporting new openings part of every permit to work in service areas. Small habits like this stop openings building up.
Compartments and services around Bridgefoot
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. Where fire-rated sealant is specified, that’s what we install, to the tested detail.
At a university such as Abertay University, 3.2 miles south-east of Bridgefoot, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. Workshops and IT rooms at colleges like Dundee and Angus College - Kingsway Campus (2 miles south-east of Bridgefoot) are re-serviced often, leaving penetrations to seal.
Bridgefoot is about 3 miles north-west of Dundee, in Angus. Commercial clients in Bridgefoot use us for work on service penetrations, as part of our coverage of Angus. 65 places across Angus fall within our area, Bridgefoot among them.
We take on service penetrations across the DD3 postcode area. We cover commercial and managed buildings on Strathmartine Road, Parklands Place and Hillview Terrace and the roads nearby. We also cover Strathmartine (1 mile east), Balgowan (1 mile south-east), St Marys (1 mile south), Ardler (1 mile south) and Downfield (1 mile south-east). Bigger towns within reach include Forfar (11 miles north-east), Monifieth (7 miles east), Carnoustie (11 miles east), Kirriemuir (12 miles north), Hunter's Town (11 miles east) and Gardynebourg (11 miles east).
Near you in Bridgefoot
Bridgefoot’s nearest station is Dundee station, roughly 3.7 miles south-east of the centre. Well-known places in the area include Strathmartine Castle (0.8 miles north-west) and Tayside Medical History Museum (3.1 miles south). Not far away are Balgay Hill and Trottick Mill Ponds.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Walls or floors that aren’t fire-resisting to begin with
- Fire risk assessments, a job for a competent assessor
- Large openings beyond what any sealant detail covers
Not sure which it is? You can phone 01277 525 020 or send photos by email and we’ll tell you honestly.
What we seal
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Cable penetrations
- Pipe penetrations