Fire-rated sealing and fire stopping in Bramshaw, Hampshire
Need fire stopping in Bramshaw? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed joints where partitions meet the slab
- Fire-rated sealant that has cracked or shrunk back
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping for Bramshaw sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
When to bring in a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
How we handle fire stopping in Bramshaw
Most of our fire stopping work happens after the building is up. Each new cable, pipe or data route cut through a fire-resisting wall leaves an opening behind, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. The enquiries we see most involve expanding foam used as fire stopping and hidden openings found during inspections, on linear gaps at wall heads, small duct penetrations where the tested detail allows and service gaps in risers. Facilities teams, main contractors and managing agents in Bramshaw tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Barn and farm-building conversions near places like Bramshaw often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Bramshaw (SO43)
- Region
- Hampshire
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Commercial clients in Bramshaw
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
From enquiry to sign-off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and we clear our waste as we work. Rural sites near Bramshaw may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Point out parking and an unloading spot
- Make sure the joints can be reached
- Warn occupants and staff about the work
Request a quote
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, call 01277 525 020 or send photos by email.
Read more
Looking after the joints
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Record which product was used where
- Ask the designer to confirm details early on refits
- Don’t let anyone top up a fire seal with the wrong product
- Include service cupboards in routine inspections
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate, and it helps at inspections.
Fire stopping in Bramshaw: the local picture
Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a building such as Church of St Peter, new heating or data runs are the usual reason penetrations need sealing. Theatres, wards and plant rooms at sites like Tatchbury Mount Hospital, 4.1 miles east of Bramshaw, all have compartment walls crossed by services. Where a unit on an estate such as Giles Lane Industrial Estate, 2.3 miles to the north of Bramshaw, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Bramshaw is about 5 miles west of Totton, in Hampshire. We cover Bramshaw and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 723 places across Hampshire fall within our area, including Bramshaw. Sites around Southampton have their own page, roughly 10 miles from Bramshaw.
We take on service penetrations across the SO43 postcode area, whatever the building. Bramshaw sits on or close to the B3079, which helps when planning parking and deliveries for the job. Just outside Bramshaw, we also work in Canada (2 miles north-east), Brook (2 miles south) and Wittensford (2 miles south-east). Further afield, our area takes in Winchester (15 miles north-east), Eastleigh (12 miles east), Totton (5 miles east), Chandler's Ford (10 miles east), Hedge End (14 miles east) and Lymington (13 miles south).
Local landmarks in Bramshaw
A little further out are Tatchbury Mount Hospital (4.1 miles east). Not far away are Copythorne Common.
Your questions answered
Can you work on a hospital site such as Tatchbury Mount Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How does the move away from BS 476 affect penetration seals in Bramshaw?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Do you take on small jobs?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Can you work while the building is occupied?
Typically, yes. We phase the work so most of the building stays in use.
Do you have public liability insurance?
Yes. We are fully insured, and the certificate can go with your quote.
What will the job cost?
That depends on the job: quantities, access, the product and any phasing. Call for a fixed quote and we’ll price it properly.
What affects the price in Bramshaw
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- How much there is to seal
- How much existing material needs removing
- The site’s rules and procedures
- Which sealant the job calls for
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Sending details for a quote
A few photographs plus some basic facts will normally do. It helps to include:
- The site address and postcode
- The type of building and who uses it
- When you need the work done
- Access details, including height
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send details through our quote form.
Places near Bramshaw
Also in Bramshaw
Surface by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, so the sealant and any backing sit properly.
Metal pipes
Sealant details often cover copper and steel pipework. Pipe diameter, annular gap, sealant depth and any pipe insulation all have to match the detail and we confirm each before sealing.