Fire Stopping in Braco
Fire-rated and intumescent sealing of service penetrations and linear gaps in Braco and across Perth and Kinross. CHAS accredited and fully insured, with a 12-month guarantee.
- Service penetrations left open after M&E works
- Unsealed penetrations discovered above suspended ceilings
- Fire-stopping items raised at inspection or handover
Fire stopping for Braco sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping around Braco: points for this area
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. We install what’s specified, to the product’s tested detail.
Around Braco, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Braco is about 10 miles north of Stirling, in Perth and Kinross. Our applicators travel to Braco for work on service penetrations, handled exactly as we handle every other area. We work across 114 places in Perth and Kinross. There’s a separate page for Glasgow, about 32 miles away.
If you need fire stopping in FK15, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Buildings on Manse Road, Mid Lane Close and Smiddy Brae are within our area for service penetrations. Sites close to Braco are covered too, including Greenloaning (1 mile south), Blackford (4 miles east), Muthill (5 miles north-east), Tullibardine (6 miles north-east) and Dunblane (6 miles south-west). Nearby towns on our patch include Crieff (8 miles north), Comrie (8 miles north-west) and Dunning (12 miles east).
Landmarks near Braco
A little further out are Feddal Castle (0.8 miles south-west).
How we handle fire stopping in Braco
Sealant is the specified answer for plenty of openings, such as metal pipes, cables and some small ducts where the detail covers them. Other openings need collars, wraps, batts, pillows or boards. We use sealant where it is the specified product, and we tell you when a detail calls for something else. If you are dealing with fire-stopping items raised at inspection or handover and builders’ foam or ordinary silicone in compartment walls, we can help, whatever the surface. Looking for mastic applicators who cover Braco? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Travel to smaller places like Braco is planned so every penetration is sealed on one trip. Send the specification and photographs of the openings, with sizes if you have them.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Place
- Braco (FK15)
- Wider area
- Perth and Kinross
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Also in Braco
Different surfaces, different methods
Cables and cable bundles
Single cables and small bundles are often within a fire-rated sealant’s tested detail. The detail limits bundle size and the gaps between and around cables.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do and we’ll tell you what the detail says instead.
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Owners, agents and contractors
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Planned maintenance programmes are welcome: working through a building or an estate in stages that fit your budget. Braco can form part of a wider programme.
Signs you need fire stopping in Braco
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is how unsuitable products and improvised details end up in compartment walls.
It’s worth sending us details if you spot any of the following:
- Openings found when ceilings come down for a refit
- Improvised or mixed-product fire seals
- Penetration schedules that need working through
- Non-fire-rated filler around services
For a building such as Braco U. F. Church, new heating or data runs are the usual reason penetrations need sealing.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- What the guarantee covers, and for how long
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Do they follow the manufacturer’s priming guidance?
After the work
Problems stay small when the joints are checked regularly. Specifically:
- Settle who seals which penetrations at the start of a project
- Keep general-purpose fillers away from compartment walls
- Check risers and ceiling voids after each round of works
- Treat an open penetration as a priority repair
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
Looking at service areas on a regular cycle pays off. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
Your questions answered
Do you design the fire stopping for buildings in Braco?
No, that sits with the designer, fire engineer or building control. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
Is a smaller place like Braco outside your area?
No. Small places get the same service as large ones. We cover the whole of Scotland. Good photographs up front let us bring everything on the first visit.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
How many days will you need on site?
It depends on the scope, though a typical visit usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Can staff carry on working while you’re here?
Usually, yes. We phase the work so most of the building stays in use, with each area protected and signed.
From enquiry to sign-off
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, with the work itself usually taking longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Travel to smaller Scottish places like Braco is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. External joints need a dry spell as well.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Agree which areas must stay open
- Send asbestos survey details if the building is pre-2000
- Confirm the product named in the specification
Quotes
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. If you have questions first, give us a call on 01277 525 020 or use the quote form.