
Boughton Malherbe fire stopping
Fire stopping in Boughton Malherbe, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Fire sealant pulled out of the opening
- Fire seals cut back for extra cables and never reinstated
- Fire-stopping items raised at inspection or handover
Fire stopping in Boughton Malherbe
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Looking after the joints
A few simple habits keep the new joints working:
- Treat an open penetration as a priority repair
- Have penetrations checked while they can still be seen
- Keep general-purpose fillers away from compartment walls
- Settle who seals which penetrations at the start of a project
Never top up a fire seal with foam, ordinary silicone or filler. A repair should use the original product, installed the same way, or a new specification from the designer.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there, not months later.
Fire stopping in Boughton Malherbe, done properly
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail rather than guesswork. If you’re dealing with head-of-wall gaps with no fire seal and penetration schedules that need working through, we can help, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, in Boughton Malherbe it comes down to the same thing: the right product in a properly prepared joint.
A job near Boughton Malherbe is usually planned around one visit, with the specification and photos sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Every job is signed off with a 12-month guarantee. The promise is simple: if our work fails within that year, we put it right.
- Location
- Boughton Malherbe (ME17)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026

Work for main contractors and building owners
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Building owners and managing agents use us on everything from one building to a spread of sites. One quote can cover more than one site, which keeps the paperwork simple.
Where services cross fire walls in Boughton Malherbe
A number of hotels sit less than 2 miles from Boughton Malherbe. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal. At about 39 miles from central London, Boughton Malherbe is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal.
Older community buildings such as Church of St Nicholas that have been rewired or given new heating can have service gaps through walls worth checking against the specification. In a hotel such as Chilston Park Hotel, 0.9 miles to the north-east of Boughton Malherbe, new pipework or cabling through bedroom and corridor walls needs sealing with the specified product. Office fit-outs on sites such as Roebuck Business Park (2.1 miles north-west of Boughton Malherbe) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Boughton Malherbe is about 8 miles south-east of Maidstone, in Kent. We cover commercial sites throughout Boughton Malherbe, for single jobs and planned programmes alike. Boughton Malherbe is one of 931 places in Kent on our list. Sites around London have their own page, roughly 39 miles from Boughton Malherbe.
Anyone looking for fire stopping in ME17 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. We also cover Liverton Street (1 mile north-west), Grafty Green (1 mile south-west), Platt's Heath (1 mile north-west), Sandway (1 mile north) and Broadstone (1 mile south-west). Further afield, our area takes in Maidstone (8 miles north-west), Ashford (9 miles south-east), Sittingbourne (9 miles north), Faversham (11 miles north-east), Minster (15 miles north) and Kings Hill (13 miles west).
What’s near Boughton Malherbe
In Boughton Malherbe, that means premises near Kiln Wood, The Lenham School and The Kings Head Public House and the streets around them. Boughton Malherbe’s nearest station is Lenham station, about 1.5 miles north-east. A little further out are Coldbridge Castle (1.1 miles south) and The Dog Collar Museum (3.5 miles north-west).
What sealant work can’t fix
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Deciding what a wall or floor needs, which belongs to the designer
- Issuing fire ratings or certificates for seals
- Fire doors, dampers or other fire safety equipment
If in doubt, phone 01277 525 020 or send details through our quote form and we will say what we think before you book.
Joints and surfaces we work on
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
General trades versus a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Smaller jobs around Boughton Malherbe can be grouped with others nearby, which keeps travel down. You’ll have a fixed quote before work starts.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Before we start on site
- Point out parking and an unloading spot
- Point out any areas we must not close
- Flag any permit to work we’ll need
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call the office on 01277 525 020 or use the quote form to discuss it first.
Related advice
Places near Boughton Malherbe
Other services in Boughton Malherbe
Why it’s worth doing now in Boughton Malherbe
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. For buildings around smaller places like Boughton Malherbe, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
What you get with us
- Fully insured, including public liability cover
- Old sealant cut out, never sealed over
- Clear, fixed quotes
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced or our accreditations and insurance.
Questions we’re asked in Boughton Malherbe
Is Boughton Malherbe too small for you to travel to?
No. Places such as Boughton Malherbe are covered as much as the big towns. Our area covers London and the South East counties. Good photographs up front let us bring everything on the first visit.
Could you schedule work at a campus like Canterbury Christ Church University for the vacation?
Yes, holiday working periods are the norm on campus jobs. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
Can you fire stop behind the services contractors?
Yes, provided a specification covers them. New services after M&E works often breach existing seals, and we reseal them to the specified detail.
Does weather matter for sealant work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
What do you charge?
Every job gets its own fixed quote. To get one, phone 01277 525 020 or email the details over with a description of the work.
What changes on 2 September 2029?
It mainly affects England, where Approved Document B is dropping its BS 476 references from 2 September 2029. Products are then judged on BS EN 13501-2 classifications, though transitional rules apply. In Scotland, the Technical Handbook sets its own guidance.