Fire stopping in Fairbourne Heath
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Fairbourne Heath and the surrounding area. Send photos or drawings for a fixed quote.
- Head-of-wall gaps with no fire seal
- Builders’ foam or ordinary silicone in compartment walls
- Openings found when ceilings come down for a refit
Fire stopping for Fairbourne Heath sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Fairbourne Heath
Opened ceilings and riser doors often reveal service openings nobody sealed. If a specification already covers those walls and floors, we can reseal to it. Where there isn’t one, the designer or fire engineer needs to set one first. We work on service gaps in risers, pipe penetrations and linear gaps at wall heads, and the usual reasons a site gets in touch are head-of-wall gaps with no fire seal and unsealed openings around new pipes and cables. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Fairbourne Heath, preparation and product choice get the time they need.
For a smaller site near Fairbourne Heath, we plan to do all the penetrations in one go, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Location
- Fairbourne Heath (ME17)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Diagnose, treat, sign off
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then handed back before the next one starts. Jobs in and around smaller places like Fairbourne Heath are normally planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Flag any permit to work we’ll need
- Point out parking and an unloading spot
- Tell us which areas need to stay in use
Request a quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, give us a call on 01277 525 020 or email drawings and photos.
Advice
What happens if it’s left?
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach and each detail can be checked as we go. One visit to deal with every failing joint makes more sense than several trips to a place like Fairbourne Heath, rather than one at a time. Photos of every joint help us quote for the whole job.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why us?
- Health and safety: CHAS accredited
- Commercial sealant work since 2005
- A fixed quote before work starts
- Work carried out by CSCS-carded applicators
Take a look at how commercial sealant jobs are priced and our accreditations.
What sealant work can’t fix
A few problems need another trade or a different fix, and we point that out rather than sealing over them:
- Openings that need collars, wraps, batts or boards rather than sealant
- Writing the fire-stopping specification
- Reviewing a building’s overall fire safety
If you are not sure, just speak to us on 01277 525 020 or email the details over and we will give you a straight answer before you book.
Surfaces we seal
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Joints between fire-resisting walls and floors
Keeping the joints sound
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Put resealing into every M&E and fit-out package
- Leave fire sealant to cure fully before covering it
- Keep general-purpose fillers away from compartment walls
- Record which product was used where
Allow the manufacturer’s stated cure time before boxing in or decorating. Not every fire-rated product can be painted, and the data sheet says which.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. That way the opening is sealed while the trade and access are still there, not months later.
Nearby places to Fairbourne Heath
Other services in Fairbourne Heath
Your questions answered
Can work at a site such as Canterbury Christ Church University fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Does your area include sites such as Roebuck Business Park, near Fairbourne Heath?
Yes. We cover Fairbourne Heath and the area around it, including industrial estates, business parks and retail parks such as Roebuck Business Park. To start, just call the office on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Do you guarantee your work?
Yes. Our workmanship is backed for 12 months.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it.
Will you write the fire-stopping specification?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
How long does a job like this take?
It depends on the scope, though a typical visit usually takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can you handle several sites?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Where services cross fire walls in Fairbourne Heath
For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Central London is about 38 miles from Fairbourne Heath. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls; the gaps need the specified seal.
In a building such as All Saints Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. Holiday works at schools like Platts Heath Primary School often leave service openings to seal before pupils return.
Fairbourne Heath is about 7 miles south-east of Maidstone, in Kent. Commercial clients in Fairbourne Heath use us for work on service penetrations, as part of our coverage of Kent. Fairbourne Heath is one of 931 places we cover in Kent for service penetrations. Sites around London have their own page, roughly 38 miles from Fairbourne Heath.
Postcode districts covered here: ME17. Buildings on Lenham Road and Windmill Hill are within our area for service penetrations. We also cover Liverton Street (1 mile east), Ulcombe (1 mile south-west), Platt's Heath (1 mile east), Pollhill (1 mile north) and Grafty Green (1 mile south-east) for service penetrations. Further afield, our area takes in Maidstone (7 miles north-west), Ashford (11 miles south-east), Sittingbourne (9 miles north), Faversham (12 miles north-east), Minster (15 miles north-east) and Kings Hill (12 miles west).
Local landmarks in Fairbourne Heath
Around Fairbourne Heath, our work takes us to commercial buildings near The Lenham School and Kiln Wood. Fairbourne Heath’s nearest station is Harrietsham station, roughly 1.6 miles north of the centre. A little further out are Coldbridge Castle (2.2 miles south-east) and The Dog Collar Museum (2.2 miles north-west).
What we are called out for in Fairbourne Heath
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls.
Site and facilities staff are often the first to spot these:
- Unsealed openings around new pipes and cables
- Fire stopping installed outside its tested range
- Unsealed joints where partitions meet the slab
- Penetration schedules that need working through
Offices at parks like Roebuck Business Park, 1.4 miles north of Fairbourne Heath, are re-cabled with each new tenant, and compartment walls need sealing afterwards to the tested detail.
Questions to ask before you book
- Whether their applicators hold CSCS cards
- Which product they’ll use, and why it suits the joint
- What the guarantee covers, and for how long
- What site paperwork they can supply
What the job involves on each surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Some intumescent sealants are tested on smaller plastic pipes, though larger ones normally call for a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance, including keys, permits and any isolations.