Fire-rated sealing and fire stopping in Boughton Lees, Kent
Fire-rated and intumescent sealing of service penetrations and linear gaps in Boughton Lees and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Fire seals cut back for extra cables and never reinstated
- Openings found when ceilings come down for a refit
- Old intumescent sealant that has split away
Need fire stopping in Boughton Lees?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Do you need fire stopping in Boughton Lees?
Mixing products or improvising a detail breaks the link with the test evidence. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are what we find most often.
Typical triggers for a call:
- Openings left by services added after handover
- Unsealed penetrations discovered above suspended ceilings
- Improvised or mixed-product fire seals
- Head-of-wall gaps with no fire seal
Older community buildings such as Saint Christopher's Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- How the existing material will be dealt with
- Health and safety accreditation such as CHAS
- What level of public liability insurance do they hold?
How we handle fire stopping in Boughton Lees
Our applicators are CSCS-carded, and we are CHAS accredited and a Constructionline member. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have fire-rated sealant that has cracked or shrunk back and seals that don’t match their tested detail, we can help, whatever the surface. Searching for sealant specialists in Boughton Lees? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Around smaller places like Boughton Lees, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Boughton Lees (TN25)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Boughton Lees
Other services in Boughton Lees
Common questions from Boughton Lees clients
How does the move away from BS 476 affect penetration seals in Boughton Lees?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Does your area include sites such as Eurogate Business Park, near Boughton Lees?
Yes, sites like Eurogate Business Park are within our area, along with the rest of Boughton Lees. Photos and a short description are enough for a first look.
How long does a job like this take?
It depends on the scope, though a typical visit typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, with one point of contact across South East England, Greater London and Scotland.
Does the weather affect the work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Is the work guaranteed?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.
Do you offer coloured sealant?
In many cases, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
Service penetrations in Boughton Lees buildings
A 2-mile radius around Boughton Lees takes in several hotels. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product. Boughton Lees lies roughly 48 miles out from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls, and the gaps need sealing with the specified product.
On a site such as Eurogate Business Park (2.2 miles south-west of Boughton Lees), every fit-out that runs new services through a compartment wall leaves penetrations to seal with the specified product. Large healthcare estates like William Harvey Hospital (3.3 miles south of Boughton Lees) change their services often, so penetration seals are worth checking after M&E work.
Boughton Lees is about 4 miles north of Ashford, in Kent. Looking for fire stopping in Boughton Lees? We can help. Our Kent coverage takes in 931 places, large and small. Our London page has more on work in that area (48 miles or so).
If you need fire stopping in TN25, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Wye Road, Pilgrims Way and Faversham Road or nearby, send details and we will quote for service penetrations. We also cover Kennington (2 miles south), Bockhanger (2 miles south-west), Potters Corner (2 miles south-west), Westwell (2 miles west) and Godinton (3 miles south-west) for service penetrations. A short drive away, we cover Ashford (4 miles south), Canterbury (10 miles north-east), Sittingbourne (13 miles north-west), Folkestone (14 miles south-east), Whitstable (13 miles north-east) and Faversham (9 miles north).
Around Boughton Lees
Around Boughton Lees, our work takes us to commercial buildings near Flying Horse Inn, among other places. For rail, the closest station is Wye station, roughly 1.4 miles east of the centre. Nearby you will also find William Harvey Hospital (3.3 miles south) and County Square (2.9 miles south-west). For a walk, there’s Hatch Park.
Cost factors for service penetrations
The price varies from site to site. It mainly depends on:
- Removal of failed or old sealant
- Specialist products, such as fire-rated or hygienic sealants
- Induction, permit and paperwork requirements
- The total length or number of joints
There’s no price list, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we will price your job on its own details.
What we need to price the job
There’s no need for a formal survey. A few details are enough to get going:
- A wide shot and a close-up of the area
- What the building is and how it’s used
- Anything awkward about access or site hours
- Whether an asbestos survey exists
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or use the quote form.
Owners, agents and contractors
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Keeping the joints sound
To get the most from the new sealant:
- Put resealing into every M&E and fit-out package
- Foam or ordinary sealant is never a fire-seal repair
- File the specified details where the next contractor can find them
- Flag new cables with no seal around them
Store the specified product details somewhere the next contractor can find them. Anyone resealing later needs to know which product and detail were used.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
Diagnose, treat, sign off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. For a building around Boughton Lees, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- We ask for the product and detail your designer has specified.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Arrange parking or a loading space
- Agree which areas must stay open
- Send your site hours and access windows
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or send photos by email if you’d rather talk the job through.