Bockhanger fire stopping
Looking for fire stopping in Bockhanger? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Fire stopping installed outside its tested range
- Open linear gaps along the top of fire-resisting walls
- Fire sealant pulled out of the opening
Fire stopping across Bockhanger
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Common questions from Bockhanger clients
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Bockhanger?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Could you schedule work at a campus like Ashford College for the vacation?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Can staff carry on working while you’re here?
Typically, yes. We phase the work so most of the building stays in use.
Can you quote from photos?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Is any job too small?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Do you offer coloured sealant?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
How we handle fire stopping in Bockhanger
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. We close the openings listed on your schedule, using the specified sealant and detail. Most enquiries involve fire seals cut back for extra cables and never reinstated and penetration schedules that need working through, across cable penetrations, service gaps in risers and pipe penetrations. A specialist sealant contractor works differently from a general builder: on jobs in Bockhanger, preparation and product choice get the time they need.
Converted and extended buildings around places like Bockhanger can mix old and new construction, so it’s worth confirming the wall or floor type before choosing the seal. The right product depends on the wall or floor and the services passing through, and we’ll tell you if the detail calls for something other than sealant.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Bockhanger (TN24, TN25)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for service penetrations
To price the job, we consider:
- Backing rod, priming and other preparation
- Distance, for remote addresses
- Which sealant the job calls for
- How much existing material needs removing
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
- The postcode of the building
- How the joints are reached, and at what height
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
General trades versus a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
On site: what to expect
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. If neighbouring businesses or buildings around Bockhanger need work too, visits can be combined. Tell us your site hours and we’ll plan around them.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
- Tell us which areas need to stay in use
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call the office on 01277 525 020 or email the details over.
Read more
Nearby places to Bockhanger
Also in Bockhanger
Why deal with it now?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Small buildings around Bockhanger suffer from failed joints as much as large ones. Catching it early means a reseal rather than repairs.
Pricing service penetrations depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.
Why choose Mastic Doctor in Bockhanger
- Failed material removed, not covered up
- 12-month guarantee on workmanship
- One contact handling all your sites
- A fixed quote before work starts
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Fire-rated sealing for Bockhanger buildings
Central London is about 48 miles from Bockhanger. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. The area within 2 miles of Bockhanger holds plenty of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close.
Older community buildings such as Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Wherever services are added at a hospital such as The One Ashford Hospital, 2.1 miles south-east of Bockhanger, the compartment line has to be made good with the specified product.
Bockhanger is about 2 miles north of Ashford, in Kent. Bockhanger sits inside our coverage and the rest of Kent, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 931 places in Kent, from busy centres to rural villages. Sites around London have their own page, roughly 48 miles from Bockhanger.
If you need fire stopping in TN24 and TN25, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on Park Road, York Road and Tudor Road or nearby, we can quote for service penetrations. Just outside Bockhanger, we also work in Kennington (1 mile north-east), Potters Corner (1 mile north-west), Godinton (2 miles south-west), Ashford (2 miles south) and Boughton Lees (2 miles north-east). Bigger towns within reach include Canterbury (12 miles north-east), Sittingbourne (14 miles north-west), Folkestone (14 miles south-east), Whitstable (15 miles north-east), Faversham (10 miles north) and Hythe (11 miles south-east).
Local landmarks in Bockhanger
Around Bockhanger, our work takes us to commercial buildings near Towers School and Sixth Form Centre, Towers School and Sixth Form Centre and Ashford Warren and Hoads Wood and the streets around them. The closest station to Bockhanger is Ashford International station, roughly 1.5 miles south. Other landmarks nearby include County Square (1.2 miles south) and William Harvey Hospital (2.2 miles south-east). Open spaces near Bockhanger include Hatch Park.
When to call us in Bockhanger
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
What tends to prompt an enquiry:
- Fire-stopping items raised at inspection or handover
- Old intumescent sealant that has split away
- Open linear gaps along the top of fire-resisting walls
- Openings found when ceilings come down for a refit
For a site team at a college like Ashford College, 1.3 miles south of Bockhanger, fire-rated sealing is best scheduled after the summer works.
Before you book anyone
- How the existing material will be dealt with
- What level of public liability insurance do they hold?
- How long is the guarantee, and what does it include?
- How they’ll work around occupants
What the job involves on each surface
Metal pipes
Sealant details often cover copper and steel pipework. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Small ducts
We seal around ducts only within what the tested detail covers. Dampers and ductwork systems themselves are outside our work.