Bieldside fire stopping
Fire stopping for Bieldside, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Hidden openings found during inspections
- Old intumescent sealant that has split away
- Seals disturbed by maintenance and left open
Fire stopping for businesses in Bieldside
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our fire stopping in Bieldside
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. We close the openings listed on your schedule, using the specified sealant and detail. Site teams most often ask us about penetration schedules that need working through and improvised or mixed-product fire seals, across joints between fire-resisting walls and floors, service gaps in risers and small duct penetrations where the tested detail allows. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Bieldside is the same: the right product in a properly prepared joint.
In Scotland’s cities, university, hospital and office estates see services added year after year, and each new run of cable or pipe through a compartment wall needs sealing. Intumescent sealant goes in where the specification calls for it, with backing and depth as tested.
Every job we finish is backed by a 12-month workmanship guarantee, in Bieldside as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Where
- Bieldside (AB15)
- Wider area
- Aberdeen
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Cost factors for service penetrations
There’s no standard rate for sealant work, because every site is different. What we take into account:
- Working within restricted access windows
- Travel to remote or island sites
- Specialist products, such as fire-rated or hygienic sealants
- The site’s rules and procedures
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
What to include in your enquiry
A good diagnosis starts with the right details. Tell us:
- What the building is and how it’s used
- Specification clauses that apply
- Photos of the joints, close up and from further back
- Drawings or a marked-up plan, if available
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Towns and villages near Bieldside
Also in Bieldside
After the work
Once the work is signed off, these steps help:
- Treat an open penetration as a priority repair
- Keep product data and details in the fire safety file
- Agree the fire-stopping specification before services go in
- Include service cupboards in routine inspections
After the work, brief anyone else working in the area that the openings are now sealed. Any seal cut back for a new service needs reinstating to its tested detail, by someone who knows the system.
The simplest way to keep compartment walls intact is to plan fire stopping into every job that crosses them. Then the seal goes in while the area is open, not months later.
Leave it or put it right?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down, and the right detail can be checked at the time. Getting access arranged for a building in Bieldside takes time, so deal with all failing joints while access is up.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
What you get with us
- One phone line for London, the South East and Scotland
- Clear, fixed quotes
- Sealing commercial buildings since 2005
- Fully insured
Read what affects the cost and how we’re accredited.
FAQs: Bieldside
Can you work around term dates at a campus such as Robert Gordon University?
Yes. We plan campus work around teaching, exams and residence turnarounds. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Does your area include sites such as Prime Four Business Park, near Bieldside?
Yes. Our area takes in Bieldside and its surroundings, with estates and business parks such as Prime Four Business Park included. Send details of the unit and the work through our quote form for a quick quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Do you seal openings left by new services?
Yes, where there is a specification for those walls and floors. Openings left by new services are among the most common jobs we see.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we’ll arrange a visit before quoting.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Is sealant suitable for all service openings?
No. Each fire-rated sealant is tested for particular services, gap sizes and substrates. Outside that, a different product is needed, specified by your designer.
How the job changes by surface
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance.
General trades versus a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Our process
In a busy building, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before the next one starts. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Pass on the site’s contractor rules when you get in touch.
- First we go through the drawings, schedule or specification for the seals.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Agree which areas must stay open
- Tell staff and tenants when we will be in
- Flag any permit to work we’ll need
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.
Advice
Fire stopping around Bieldside: what changes locally
Six care or nursing homes sit less than 2 miles from Bieldside. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. The area within 2 miles of Bieldside holds a number of hotels. In hotels, bedroom and corridor walls are usually fire-resisting, so services added in a refit need sealing with the specified product.
At a university such as Robert Gordon University (2.4 miles east of Bieldside), labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. For a hotel such as Cults Hotel (1.1 miles east of Bieldside), penetration seals are worth checking after any refit or services upgrade. Halls and meeting rooms at places like Cults West Parish Church sometimes gain new services, and any compartment wall crossed needs the specified seal.
Bieldside is about 4 miles south-west of Aberdeen, in Aberdeen. Across the AB15 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Bieldside is one of 40 places we cover in Aberdeen for service penetrations.
If you need fire stopping in AB15, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Bieldside Station Road, Baillieswells Drive and Baillieswells Road or close by, send details and we’ll quote for service penetrations. Close to Bieldside, our area also takes in Riverside of Blairs (1 mile south), Milltimber (1 mile west), Countesswells (2 miles north), Peterculter (3 miles west) and Kingswells (3 miles north). A short drive away, we cover Aberdeen (4 miles north-east), Rosemount (4 miles north-east), Berryden (4 miles north-east), Ferryhill (4 miles north-east), New Aberdeen (5 miles north-east) and Dyce (6 miles north).
Around Bieldside
In Bieldside, that means premises near Hazlehead Park. For rail, the closest station is Aberdeen station, roughly 4.4 miles north-east of the centre. Other landmarks nearby include Pitfoddels Castle (2 miles east) and Woodend Hospital (2.6 miles north-east). Not far away are Murtle Dam and Beans Hill.