Fire stopping in Berriedale
Fire-rated and intumescent sealing of service penetrations and linear gaps in Berriedale. CHAS accredited and fully insured, with a 12-month guarantee.
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed openings around new pipes and cables
- Unsealed penetrations discovered above suspended ceilings
Need fire stopping in Berriedale?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping in Berriedale: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, with proprietary products, intumescent ones included, tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Older community buildings such as Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Berriedale is about 28 miles south of Thurso, in Highland. Businesses, contractors and managing agents in Berriedale can call on us for service penetrations, as part of our coverage of Highland. 256 places across Highland fall within our area, including Berriedale.
Business premises anywhere in KW7 are within our area. Close to Berriedale, our area also takes in Balnabruich (5 miles north-east), Dunbeath (5 miles north-east), Navidale (6 miles south-west), East Helmsdale (7 miles south-west) and Lybster (11 miles north-east). Where a site is remote or on an island, travel and materials need planning ahead, so include the location in your enquiry.
Landmarks near Berriedale
Other landmarks nearby include Berriedale Castle (less than half a mile south-east). Open spaces near Berriedale include Scaraben.
How we handle fire stopping in Berriedale
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow. We work on pipe penetrations, linear gaps at wall heads and small duct penetrations where the tested detail allows, and the usual reasons a site gets in touch are head-of-wall gaps with no fire seal and hidden openings found during inspections. One point of contact handles commercial sealant work in Berriedale from the first photographs to the final walk-round, whether it’s one building or several.
In smaller Scottish places like Berriedale, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Where
- Berriedale (KW7)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Your questions answered
Will you design a fire-stopping scheme for our building in Berriedale?
No. The designer or fire engineer sets the detail and building control accepts it. We install fire-rated and intumescent sealant around service penetrations and linear gaps where it is specified, to the manufacturer’s tested detail.
How do the Scottish rules apply to fire-rated sealing in Berriedale?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes anything from one day to a planned run of visits, depending on the number of seals and the access. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Will you just go over the old sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Which sealant will you use?
Where there’s a specification, we use the product it names. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
What affects the price in Berriedale
These are the things that shape the price:
- Any access equipment needed
- Working within restricted access windows
- How much there is to seal
- Travel to remote or island sites
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Before you send an enquiry
We can often quote from photographs and a few details. It helps to include:
- Any specification or named product
- The type of building and who uses it
- Asbestos survey details if the building is older
- Where the site is, with the postcode
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or use the quote form with what you know.
How a job runs
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. Tell us who will meet us and how to get in at your building near Berriedale. That goes into the plan alongside the quote.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Warn occupants and staff about the work
- Tell us your opening times and when work is allowed
- Explain the parking and delivery arrangements
Request a quote
To get a fixed quote, phone 01277 525 020 or use the quote form with the site address and an outline of the work. Our quote form is another easy route.
Advice
What the job involves on each surface
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement.
Metal pipes
Heat travels along metal pipework, and the tested detail may ask for insulation beyond the wall. If the detail needs something beyond sealant, we tell you.
When to call us in Berriedale
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position.
Clients usually get in touch after noticing one or more of the following:
- Fire seals cut back for extra cables and never reinstated
- Unsealed openings around new pipes and cables
- Expanding foam used as fire stopping
- Snag lists that include open service penetrations
For buildings in and around Berriedale, fire-rated sealant is installed where it is specified, to the manufacturer’s tested detail.
What your quote should include
- Will RAMS and insurance details be available?
- Will CSCS-carded applicators be on site?
- How the existing material will be dealt with
- Their pre-qualification and accreditations
Building owners, agents and FMs in Berriedale
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Berriedale can sit alongside others in a wider programme across Highland.