Fire stopping in Bermondsey
Planning work on a service penetration in Bermondsey? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Improvised or mixed-product fire seals
- Fire-stopping items raised at inspection or handover
- Non-fire-rated filler around services
Need fire stopping in Bermondsey?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Why it’s worth doing now in Bermondsey
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down and each detail can be checked as we go. In Bermondsey, each extra visit means more notices, permits and disruption, so cutting the old sealant out fully and doing it right once is the better route.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why appoint us
- Public liability insurance in place
- Sealing commercial buildings since 2005
- Work carried out by CSCS-carded applicators
- Work to your specification and the manufacturer’s guidance
Read our cost guide or how we’re accredited.
About our fire stopping in Bermondsey
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. We work from your penetration schedule or marked-up drawings. Tell us what records you need and we will confirm with the quote. If you’re dealing with head-of-wall gaps with no fire seal and builders’ foam or ordinary silicone in compartment walls, we can help, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Bermondsey it comes down to the same thing: the right product in a properly prepared joint.
In London, higher-risk residential buildings under the Building Safety Act bring extra scrutiny of fire-stopping records. We install what the designer or fire engineer has specified, and if you need records of the work, tell us and we will confirm with the quote.
Our workmanship is guaranteed for 12 months, in Bermondsey as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Bermondsey (SE1, SE16, SE5)
- Wider area
- Greater London
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Also near Bermondsey
Other services in Bermondsey
Building owners, agents and FMs in Bermondsey
Building owners and managing agents use us on everything from one building to a spread of sites around Bermondsey. One quote can cover more than one site, so there’s one set of paperwork to deal with.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Fire stopping in Bermondsey: the local picture
The 2 miles around Bermondsey include two care or nursing homes. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Wherever services are added at a hospital such as Guy's Hospital (0.7 miles north-west of Bermondsey) the compartment line has to be made good with the specified product. For a unit at a site such as Alscot Road Industrial Estate (under half a mile south of Bermondsey), new power or data runs between office and warehouse can breach a compartment wall.
Bermondsey is about 1 mile east of London, in Greater London. Bermondsey sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Greater London, 764 places are covered, Bermondsey among them.
Business premises anywhere in SE1, SE16 and SE5 are within our area. We cover commercial and managed buildings on Crown Square, Fire Station Square and Layard Square and the roads nearby. Main routes into Bermondsey include the A100 and B202, which helps when planning parking and deliveries for the job. If your building is just outside Bermondsey, we cover Walworth (1 mile south-west), London (1 mile west), South Bermondsey (1 mile south-east), Surrey Canal (1 mile south-east) and Surrey Quays (1 mile east). A short drive away, we cover City of Westminster (4 miles west), Marylebone (3 miles north-west), Kensington (5 miles west), St Pancras (3 miles north-west), Walthamstow (7 miles north) and Hoxton (3 miles north).
What’s near Bermondsey
Locally, jobs take us to sites close to Asylum for the deaf and dumb, St Mary-at-Hill and Harris Academy Bermondsey. Other local landmarks include Bishopsgate Institute Special Collections and Archives (1.5 miles north), Bermondsey Spa Gardens (under half a mile south) and Simon the Tanner pub (less than half a mile west). For rail, the closest station is London Bridge station, about 0.7 miles north-west. Well-known places in the area include Fashion and Textile Museum (less than half a mile west) and Guy's Hospital (0.7 miles north-west). For a walk, there’s St. James's Park Lake and Bellenden Road Nature Garden.
From enquiry to sign-off
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. For a job in Bermondsey, access comes first: booked loading, goods lifts, the building’s permit system and a spot to keep materials. Give us the hours we can be on site and we’ll schedule to suit.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Send any specification or drawings in advance
- For older buildings, check the asbestos register before work
- Tell us your opening times and when work is allowed
Getting a fixed quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, call the office on 01277 525 020 or email drawings and photos.
Read more
Different surfaces, different methods
Risers and ceiling voids
Openings above suspended ceilings are easy to miss. We follow your schedule area by area, and note anything we find that isn’t on it.
Plastic pipes
Plastic waste pipes through slabs come up often. The detail decides whether sealant alone is enough, and we will never swap a specified collar for sealant.
Common problems we fix in Bermondsey
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
Site and facilities staff are often the first to spot these:
- Fire sealant pulled out of the opening
- Service penetrations left open after M&E works
- Openings found when ceilings come down for a refit
- Expanding foam used as fire stopping
At a university such as Northeastern University London (0.6 miles north of Bermondsey), labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Comparing quotes
- Proof of insurance
- Their pre-qualification and accreditations
- How they’ll work around occupants
- Will RAMS and insurance details be available?
Maintenance after handover
Regular inspection catches problems early. In particular:
- Check with the data sheet before painting over fire sealant
- Check risers and ceiling voids after each round of works
- Keep product data and details in the fire safety file
- Ask the designer to confirm details early on refits
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted.
Write fire stopping into the scope of any work crossing a compartment wall or floor. That way the opening is sealed while the trade and access are still there, not months later.
Bermondsey: questions and answers
Can you work at a site such as Alscot Road Industrial Estate, by Bermondsey?
Yes. We cover Bermondsey and the area around it, including industrial estates, business parks and retail parks such as Alscot Road Industrial Estate. To start, just speak to us on 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Can work at a site such as Northeastern University London fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.
Is colour matching possible?
That depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. You’ll have an expected duration with the quote.
Do you guarantee your work?
Yes. Workmanship is guaranteed for 12 months on every job.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.