Barns of Claverhouse fire stopping
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Barns of Claverhouse and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Seals that don’t match their tested detail
- Fire sealant pulled out of the opening
- Hidden openings found during inspections
Fire stopping in Barns of Claverhouse
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
About our fire stopping in Barns of Claverhouse
Facilities managers in Barns of Claverhouse often find open service penetrations when ceilings come down for other work. Where the walls and floors already have a fire-stopping specification, we can work to it. Where there isn’t one, the designer or fire engineer needs to set one first. If you have service penetrations left open after M&E works and fire sealant pulled out of the opening, we can help, on small duct penetrations where the tested detail allows, linear gaps at wall heads and joints between fire-resisting walls and floors alike. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Barns of Claverhouse, that means joint design, primers and backing rod as standard.
Travel to smaller places like Barns of Claverhouse is planned so every penetration is sealed on one trip. Send the specification and photos of the openings, with sizes if you have them.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Barns of Claverhouse (DD3)
- Region
- Angus
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Penetration seals near Barns of Claverhouse
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Where fire-rated sealant is specified, that’s what we install, to the tested detail. The 2 miles around Barns of Claverhouse include two care or nursing homes. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
Colleges such as Dundee and Angus College - Kingsway Campus, 1.6 miles south-west of Barns of Claverhouse, add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product. Where a unit on an estate such as Claverhouse Industrial Park, 0.8 miles south-east of Barns of Claverhouse, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Barns of Claverhouse is about 2 miles north of Dundee, in Angus. Looking for fire stopping in Barns of Claverhouse? We can help. Across Angus, 65 places are covered, Barns of Claverhouse among them.
We take on service penetrations across the DD3 postcode area, whatever the building. We also cover Claverhouse (1 mile south), Mill of Mains (1 mile south), Inveraldie (1 mile north), Strathmartine (2 miles west) and Balgowan (2 miles west) for service penetrations. Bigger towns within reach include Arbroath (15 miles east), Forfar (10 miles north), Monifieth (5 miles east), Carnoustie (9 miles east), Kirriemuir (12 miles north) and Hunter's Town (9 miles east).
Near you in Barns of Claverhouse
The nearest railway station is Dundee station, about 3.3 miles south of the centre. Other landmarks nearby include Powrie Castle (0.7 miles south-east) and Maryfield Hospital (2 miles south). Green spaces nearby include Trottick Mill Ponds and Balgay Hill.
Questions about Barns of Claverhouse
Will you work in a care home in Barns of Claverhouse without moving residents out?
Yes. We agree rooms and times with the manager and work a few areas at a time. Any site rules, from signing in to infection control, are agreed before we start.
Can you work on a hospital site such as Kings Cross Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will you write the fire-stopping specification?
No. The specification comes from your designer, fire engineer or building control. Our role is installing what they specify, to the product’s tested detail.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit before quoting.
How do I request a quote?
It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Which sealant will you use?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Keeping the joints sound
Problems stay small when the joints are checked regularly. In particular:
- Ask which product is in place before decorating
- Arrange inspection before areas are covered up
- Brief every trade that openings they make must be sealed
- Foam or ordinary sealant is never a fire-seal repair
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Do you need fire stopping in Barns of Claverhouse?
Most open service penetrations are left by later work. New cabling, rerouted pipework or a data route drilled through a riser can leave the hole behind. Over a few years of fit-outs, a wall can collect a lot of these.
It’s worth sending us details if you spot any of the following:
- Unsealed openings around new pipes and cables
- Expanding foam used as fire stopping
- Openings found when ceilings come down for a refit
- Fire seals cut back for extra cables and never reinstated
At a university such as Abertay University, 2.9 miles south of Barns of Claverhouse, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work.
Before you book anyone
- What site paperwork they can supply
- The named product and why it was chosen
- Their pre-qualification and accreditations
- What the guarantee covers, and for how long
How the job changes by surface
Metal pipes
Copper and steel pipes are a common service penetration for fire-rated sealant. The tested detail sets the pipe size range, gap, depth and whether insulation can stay on.
Drylining partitions
Drylined fire walls are tested in a particular build-up. The sealant detail has to be tested in that wall type, with the stated board layers before sealing.
What sealant work can’t fix
Before quoting, we check that sealant is the right answer. It won’t put right:
- Openings that need collars, wraps, batts or boards rather than sealant
- Fire risk assessments, a job for a competent assessor
- Issuing fire ratings or certificates for seals
If in doubt, phone 01277 525 020 or send details through our quote form and we will say what we think before you book.
What we seal
- Pipe penetrations
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
Our process
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Jobs near Barns of Claverhouse are often grouped with others in the same area. Tell us how flexible your dates are.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Getting the site ready
- Point out parking and an unloading spot
- Tell us your opening times and when work is allowed
- Let building users know which areas are affected
Get a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email the details over if you’d rather talk the job through.