Fire-rated sealing and fire stopping in Barnham, West Sussex
Work needed on a service penetration in Barnham? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Unsealed joints where partitions meet the slab
- Hidden openings found during inspections
- Fire-rated sealant that has cracked or shrunk back
Need fire stopping in Barnham?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Fire stopping for commercial buildings in Barnham
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, call the office on 01277 525 020 or use the quote form with the schedule or marked-up drawings. Tell us what records you need and we’ll confirm with the quote. If you are dealing with fire-stopping items raised at inspection or handover and old intumescent sealant that has split away, we can put it right. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Barnham, that means joint design, primers and backing rod as standard.
Smaller places such as Barnham still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
A 12-month guarantee applies to all our work. Should something we installed fail, ring 01277 525 020 or send photos by email and we’ll come back to it.
- Location
- Barnham (PO22)
- Wider area
- West Sussex
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Barnham: questions and answers
Is a smaller place like Barnham outside your area?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you work in occupied care homes around Barnham?
Yes, with the manager deciding the order and timing of rooms. Any site rules, from signing in to infection control, are agreed before we start.
Is colour matching possible?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Do you work in Scotland as well as England?
Building standards in Scotland are separate from England’s. Wherever the site is, our work follows the specification and the tested detail.
What do BS EN 1366-3 and BS EN 13501-2 mean?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. An EI 60 seal kept its integrity and insulation for 60 minutes as tested.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
Why deal with it now?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. Around Barnham, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote.
Why appoint us
- A fixed quote before work starts
- CHAS accredited
- Products installed to the manufacturer’s instructions
- Over 20 years of commercial sealing
Read how commercial sealant jobs are priced and our accreditations.
What sealant work can’t fix
Honesty saves time and money. New sealant won’t cure:
- Walls or floors that aren’t fire-resisting to begin with
- Signing off or certifying a building’s fire stopping
- Large openings beyond what any sealant detail covers
If you are not sure, just phone 01277 525 020 or email drawings and photos and we’ll give you a straight answer.
Where we work in Barnham
- Pipe penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Cable penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. For a building around Barnham, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We ask for the product and detail your designer has specified.
- We sort the openings by the detail each one needs.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Before we start on site
- Point out parking and an unloading spot
- Flag any permit to work we will need
- Make sure the joints can be reached
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email a schedule or drawings to discuss it first.
Related advice
Quoting for work in Barnham
What shapes the price:
- Location, for remote and island sites
- The product specified
- Joint width, depth and condition
- Site requirements such as inductions and permits
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote once you have the details.
What we need to price the job
The more we know, the firmer the quote. When you get in touch, include:
- The postcode of the building
- Clear photographs of the problem areas
- What the building is and how it’s used
- How the joints are reached, and at what height
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. The easiest way is to call 01277 525 020 or email the details over.
Signs you need fire stopping in Barnham
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in.
Site and facilities staff are often the first to spot these:
- Penetration schedules that need working through
- Fire-rated sealant that has cracked or shrunk back
- Service penetrations left open after M&E works
- Builders’ foam or ordinary silicone in compartment walls
For a building such as The Parish Church of St Mary, new heating or data runs are the usual reason penetrations need sealing.
What to look for in a quote
- Health and safety accreditation such as CHAS
- Whether old or failed sealant will be cut out, not overlaid
- Their approach to joint depth and backing
- Their public liability cover
Places near Barnham
Other services in Barnham
After the work
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Ask which product is in place before decorating
- Keep product data and details in the fire safety file
- Keep general-purpose fillers away from compartment walls
- Arrange inspection before areas are covered up
During planned inspections, look at seals in risers, cupboards and voids. Look for cracks, unsealed new cables and gaps that have been enlarged, and report them promptly.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate.
Service penetrations in Barnham buildings
Six care or nursing homes sit less than 2 miles from Barnham. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. Fire stopping of openings and penetrations in England falls under Approved Document B. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
In a retail centre such as Arun Retail Park (2.6 miles south-west of Barnham), any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail. For an estates team at a campus like University of Chichester (Bognor Campus), which lies south-west of Barnham, summer M&E works are usually followed by a round of penetration sealing.
Barnham is about 4 miles north-east of Bognor Regis, in West Sussex. We send applicators to Barnham for service penetrations. Barnham is one of 373 places in West Sussex on our list. Sites around Portsmouth have their own page, roughly 19 miles from Barnham.
Business premises anywhere in PO22 are within our area for service penetrations. For a building on Garden Crescent, Dollery Road and Goodacres or nearby, send details and we will quote for service penetrations. Close to Barnham, our area also takes in West Barnham (1 mile north-west), Walberton (1 mile north-east), Yapton (1 mile south-east), Eastergate (1 mile north-west) and Lidsey (1 mile south-west). Bigger towns within reach include Worthing (10 miles east), Bognor Regis (4 miles south-west), Chichester (6 miles west), Selsey (9 miles south-west), Littlehampton (5 miles east) and Lancing (14 miles east).
Local landmarks in Barnham
In Barnham, that means premises near The Murrell Arms and St Philip Howard Catholic High School, among other places. There’s a railway station in Barnham itself: Barnham station. A little further out are Bognor Regis War Memorial Hospital (3.2 miles south-west) and Tote Copse Castle (2.5 miles west). Green spaces nearby include WWT Arundel.