Fire stopping in Banbhaidh
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Banbhaidh. Send details for a fixed quote.
- Seals that don’t match their tested detail
- Head-of-wall gaps with no fire seal
- Non-fire-rated filler around services
Need fire stopping in Banbhaidh?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When to call us in Banbhaidh
Mixing products or improvising a detail breaks the link with the test evidence. An oversized gap, too shallow a bead, missing backing or two makers’ products combined are the usual culprits.
What tends to prompt an enquiry:
- Open linear gaps along the top of fire-resisting walls
- Damaged fire seals in risers and voids
- Old intumescent sealant that has split away
- Improvised or mixed-product fire seals
Industrial units on estates such as Blar Mhor Industrial Estate (to the south-east of Banbhaidh) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Comparing quotes
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Will CSCS-carded applicators be on site?
- Are they CHAS accredited or on Constructionline?
- Will failed sealant be removed rather than covered?
Fire stopping in Banbhaidh, done properly
No fire sealant works on its own: the evidence covers a specific product, wall or floor type, service, gap, depth and backing. We match each opening to that detail before any sealant goes in, and raise it with you if it falls outside. If you have snag lists that include open service penetrations and fire seals cut back for extra cables and never reinstated, we can put it right. A specialist sealant contractor works differently from a general builder: on jobs in Banbhaidh, preparation and product choice get the time they need.
Around smaller places such as Banbhaidh, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Place
- Banbhaidh (PH33)
- Region
- Highland
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Fire-rated sealing for Banbhaidh buildings
The area within 2 miles of Banbhaidh holds a good number of hotels. Hotels are divided into compartments, and refurbishments that add pipes and cables through bedroom and corridor walls leave gaps to close. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
For a hotel such as Ben Nevis Hotel and Leisure Club, 1.4 miles south-east of Banbhaidh, penetration seals are worth checking after any refit or services upgrade. Theatres, wards and plant rooms at sites like Belford Hospital, 1.8 miles to the south of Banbhaidh, all have compartment walls crossed by services.
Banbhaidh (Gaelic: Banavie) is in Highland. Banbhaidh sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Banbhaidh is one of 256 places in Highland on our list. Our Glasgow page has more on work in that area, about 75 miles away.
Business premises anywhere in PH33 are within our area. Buildings on Old Banavie Road, Locheil Crescent and Campbell Road are within our area. Nearby places we also cover include Caol (1 mile south), Taobh Lochaidh (1 mile south-east), Corpach (1 mile west), Inverlochy (1 mile south) and Fort William (2 miles south) for service penetrations. For island and remote sites, travel and materials need planning ahead, so include the location in your enquiry.
Landmarks near Banbhaidh
In Banbhaidh, that means premises near Black Parks and Lochaber High School and the streets around them. Banbhaidh has its own railway station: Banavie station. A little further out are Belford Hospital (1.8 miles south) and Treasures Of The Earth (0.9 miles west).
Leave it or put it right?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. Putting it right is typically a modest job when the openings are accessible. Wait until ceilings close or areas are occupied and the same work becomes harder to reach. Around smaller places like Banbhaidh, halls, stores and seasonal buildings may not be checked often, so a failed joint has time to cause damage. Early resealing prevents it.
Pricing service penetrations depends on quantities, condition and access. Ask us for a fixed quote.
Why choose Mastic Doctor in Banbhaidh
- Clear, fixed quotes
- Specification-led, product-correct work
- 12-month guarantee on workmanship
- CHAS accredited contractor
See our cost guide and our accreditations.
Towns and villages near Banbhaidh
Also in Banbhaidh
After the work
A few simple habits keep the new joints working:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Report damaged or disturbed seals as soon as they’re spotted
- Ask the designer to confirm details early on refits
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, and it helps at inspections.
Surface by surface
Masonry and concrete
Block walls and concrete floors are common substrates for penetration seals. Dust and loose debris are cleared out of the opening, with backing added if the detail requires it.
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. The detail limits bundle size and the gaps between and around cables.
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Tell us who will meet us and how to get in at your building near Banbhaidh. We will confirm the plan with the fixed quote.
- We read the specification, drawings or penetration schedule you send.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Make sure the joints can be reached
- Warn occupants and staff about the work
- Let us know about inductions and permits
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Advice
When it isn’t the sealant
Sealant solves a lot, but not everything, and we are upfront when that’s the case. These need a different solution:
- Fire risk assessments, a job for a competent assessor
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Gaps in walls that were never built as compartment walls
If you’re not sure, just ring 01277 525 020 or email drawings and photos and we will give you a straight answer.
Joints and surfaces we work on
- Cable penetrations
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Joints between fire-resisting walls and floors
Banbhaidh: questions and answers
Does your area include sites such as Blar Mhor Industrial Estate, near Banbhaidh?
Yes. Estates, retail parks and business parks around Banbhaidh, Blar Mhor Industrial Estate among them, are all within reach. To start, just call 01277 525 020 or send details through our quote form with the unit, the joints involved and your access times.
Can you seal penetrations in a hotel in Banbhaidh after a refit?
Yes. We install fire-rated and intumescent sealant where it is specified. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
How do you choose the sealant?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
How do I request a quote?
You can use the quote form on this site; alternatively, give us a call on 01277 525 020 or email drawings and photos. Include photos or drawings if you have them.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months on every job.
Will you just go over the old sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
How long does a typical visit take?
It depends on the scope, though a typical visit normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.