Fire-rated sealing and fire stopping in Artington, Surrey
Fire stopping in Artington, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Hidden openings found during inspections
- Old intumescent sealant that has split away
- Builders’ foam or ordinary silicone in compartment walls
Need fire stopping in Artington?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping for commercial buildings in Artington
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have open linear gaps along the top of fire-resisting walls and unsealed openings around new pipes and cables, we can put it right. A single leaking joint is often how a building in Artington first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around smaller places like Artington, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Artington (GU3)
- Wider area
- Surrey
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. Jobs in and around smaller places like Artington are typically planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Tell staff and tenants when we’ll be in
- Make sure the joints can be reached
- Send your site hours and access windows
Getting a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email a schedule or drawings.
Related advice
Should maintenance staff do it?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Nearby places to Artington
Also in Artington
What happens if it’s left?
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first and the building feels the difference. Around Artington, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
The price depends on the quantity of joints, what has to come out first and how the joints are reached. Call for a quote once you have the details.
Why choose Mastic Doctor in Artington
- Commercial sealant work since 2005
- Products installed to the manufacturer’s instructions
- Public liability insurance in place
- A fixed quote before work starts
See what affects the cost or our accreditations and insurance.
What the job involves on each surface
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. BS EN 1366-4 testing sets the joint widths, depths, backing and movement a seal covers, and we work within it.
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail.
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Fire stopping in Artington: the local picture
In England, Approved Document B covers fire stopping of openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. There are several hotels within about 2 miles of Artington. A hotel refit often runs new services through compartment walls between bedrooms and corridors, and each opening needs the specified seal.
At a college such as Guildford College, 1.9 miles to the north of Artington, checking penetration seals after summer M&E works is good practice. Tenant changes at centres like Ladymead Retail Park (to the north of Artington) often mean new services through walls between units.
Artington is about 2 miles south of Guildford, in Surrey. We send applicators to Artington for service penetrations. Artington is one of 379 places we cover in Surrey. Our Reading page has more on work in that area.
Commercial sites across GU3 are covered. If your site is on Old Portsmouth Road, The Ridges and River Wey Close or close by, we can quote for service penetrations. Main routes into Artington include the A3100. Close to Artington, our area also takes in Broadford (1 mile south-east), Peasmarsh (1 mile south), Shalford (1 mile south-east), East Shalford (1 mile east) and Abbotswood (2 miles north-east). A short drive away, we cover Woking (7 miles north), Camberley (10 miles north-west), Farnham (9 miles west), Egham (15 miles north), Walton-on-Thames (14 miles north-east) and Dorking (11 miles east).
What’s near Artington
In Artington, that means premises near Shalford Park, Academy of Contemporary Music and Guildford County School and the streets around them. The nearest railway station is Shalford station, about 0.7 miles south-east of the centre. Nearby you will also find Surrey Police Museum (under half a mile north-west) and Guildford Castle (1.1 miles north). The countryside around Artington includes Pewley Down and St Catherine's Hill.
Questions we’re asked in Artington
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Artington?
From 2 September 2029, Approved Document B drops its BS 476 references in favour of BS EN 13501-2 classification, with transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Do you cover business parks and estates near Artington, such as Quadrum Industrial Park?
Yes, sites like Quadrum Industrial Park are within our area, along with the rest of Artington. A few photos and the unit address let us price the work.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also call 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
How long does a typical visit take?
That varies with the scale of the job, but the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we will set out a timescale with the quote.
Signs you need fire stopping in Artington
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
Site and facilities staff are often the first to spot these:
- Service penetrations left open after M&E works
- Penetration schedules that need working through
- Fire stopping installed outside its tested range
- Hidden openings found during inspections
Industrial units on estates such as Quadrum Industrial Park (0.7 miles south of Artington) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Comparing quotes
- What site paperwork they can supply
- Their plan for phasing and protecting the area
- What level of public liability insurance do they hold?
- Health and safety accreditation such as CHAS