Fire-rated sealing and fire stopping in Alves, Moray
Work needed on a service penetration in Alves? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Openings left by services added after handover
- Hidden openings found during inspections
- Builders’ foam or ordinary silicone in compartment walls
Need fire stopping in Alves?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Compartment walls and floors in Alves
Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, with proprietary products, intumescent ones included, tested for their end use. We install what’s specified, to the product’s tested detail.
For a hospital such as The Oaks, 4.1 miles to the east of Alves, penetration sealing is typically phased ward by ward, with infection-control rules agreed first. Older community buildings such as Old Parish Church that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Alves is about 5 miles west of Elgin, in Moray. We send applicators to Alves for service penetrations. Across Moray, 59 places are covered, including Alves. For work in that direction, see our Aberdeen page (60 miles or so).
We take on service penetrations across the IV30 postcode area, whatever the building. Streets here include Moir Street, Main Road and Carden Close. If your building is just outside Alves, we cover Newton (2 miles east), College of Roseisle (3 miles north), Miltonduff (3 miles south-east), Kinloss (4 miles west) and Pittendreich (4 miles east). Further afield, our area takes in Elgin (5 miles east), Forres (7 miles west), Lossiemouth (8 miles north-east), Ashgrove (6 miles east), Burghead (4 miles north) and Fochabers (13 miles east). Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Landmarks near Alves
Well-known places in the area include Sparrow Castle (0.8 miles north) and The Oaks (4.1 miles east).
Fire stopping in Alves
Fire-rated sealant suits many small service penetrations: copper and steel pipes, cables and some small ducts where the tested detail allows. Larger openings and some plastic pipes call for collars, wraps, batts or boards instead. If the detail calls for something other than sealant, we say so rather than force sealant into it. We work on pipe penetrations, small duct penetrations where the tested detail allows and joints between fire-resisting walls and floors, and the failures we are asked to look at most are unsealed joints where partitions meet the slab and hidden openings found during inspections. One point of contact handles commercial sealant work in Alves from the first photographs to the final walk-round, for single jobs and planned programmes alike.
In smaller Scottish places like Alves, buildings with fire-resisting walls typically include schools, care homes, hotels and health centres. Those penetrations are closed with the product the specification names, built up as tested.
Guaranteed is the last step of every job. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Place
- Alves (IV30)
- Region
- Moray
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What sets the cost
Each job is priced on its own details. The main factors are:
- The size and state of each joint
- Which sealant the job calls for
- Travel to remote or island sites
- Site requirements such as inductions and permits
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
What we need to price the job
We can often quote from photographs and a few details. It helps to include:
- Whether the building will be occupied during the work
- Whether an asbestos survey exists
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. For a chat about it beforehand, call 01277 525 020 or use the quote form.
Honest limits
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Openings that need collars, wraps, batts or boards rather than sealant
- Reviewing a building’s overall fire safety
- Construction that lacks the fire resistance the seal relies on
Not sure which it is? You can ring 01277 525 020 or email the details over and we will tell you honestly.
Where we work in Alves
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Linear gaps at wall heads
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Service gaps in risers
Your questions answered
Is Alves off your patch?
Not at all: smaller places are covered as well as towns. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Would you work within a site like The Oaks?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Do you have third-party installer accreditation for fire stopping?
No, and we won’t imply otherwise. Some clients require third-party installer schemes even though the law doesn’t, so check your contract first. If it doesn’t require one, we can install the specified fire-rated sealant to its tested detail.
Do you certify or sign off fire stopping?
No. Approval sits with the designer, principal designer or building control. We’ll confirm the products and details used.
Will you write the fire-stopping specification?
No. The specification comes from your designer, fire engineer or building control. Our role is installing what they specify, to the product’s tested detail.
Can you send site paperwork?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
Aftercare for building managers
After handover, a little attention goes a long way:
- Agree the fire-stopping specification before services go in
- Leave fire sealant to cure fully before covering it
- Put resealing into every M&E and fit-out package
- Have penetrations checked while they can still be seen
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
Keep a register of where seals are and what they are made of. It tells the next contractor exactly what to reinstate.
What happens if it’s left?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Alves, a repair visit takes planning, so it’s better to act early.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why appoint us
- CHAS accredited contractor
- One phone line for London, the South East and Scotland
- A fixed quote before work starts
- Our applicators hold CSCS cards
Take a look at how commercial sealant jobs are priced or our accreditations and insurance.
Towns and villages near Alves
What else we do in Alves
General trades versus a specialist
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
How a job runs
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. For a building near Alves, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
Before we start on site
- Share the asbestos register for older buildings
- Send your site hours and access windows
- Explain the parking and delivery arrangements
Getting a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.