Fire Stopping in Pittendreich
Fire stopping in Pittendreich, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Unsealed penetrations discovered above suspended ceilings
- Improvised or mixed-product fire seals
- Seals disturbed by maintenance and left open
Fire stopping for Pittendreich sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping in Pittendreich, done properly
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. So our job is to reproduce that arrangement faithfully. Most enquiries involve unsealed joints where partitions meet the slab and non-fire-rated filler around services, on pipe penetrations, linear gaps at wall heads and cable penetrations. Searching for sealant specialists in Pittendreich? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
Hotels and care homes around smaller places like Pittendreich often have services added during refurbishment. We fit the specified fire-rated sealant as its published detail shows and raise it if another product is needed.
Every job we finish is backed by a 12-month workmanship guarantee, in Pittendreich as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Location
- Pittendreich (IV30)
- Wider area
- Moray
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
How do Scotland’s building standards affect fire-rated sealant in Pittendreich?
The non-domestic Technical Handbook, clause 2.1.14, expects a penetration to keep at least the wall or floor’s fire resistance period, with proprietary products tested for the use they’re put to. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
Could you schedule work at a campus like Moray College UHI - Technology Centre for the vacation?
Yes. We plan campus work around teaching, exams and residence turnarounds. Let us know which documents your site asks for, and we will confirm them alongside the quote.
How many days will you need on site?
That varies with the scale of the job, though a typical visit normally takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Larger or phased jobs take longer, and we will give you a timescale with the quote.
What do you charge?
Each job is quoted on its own details. For yours, give us a call on 01277 525 020 or email a schedule or drawings.
Do you offer coloured sealant?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. For a building near Pittendreich, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Getting the site ready
- Tell us which areas need to stay in use
- Explain the parking and delivery arrangements
- Have the specification and drawings to hand
Quotes
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or send photos by email to discuss it first.
Read more
Honest limits
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Issuing fire ratings or certificates for seals
- Fire doors, dampers or other fire safety equipment
- Large openings beyond what any sealant detail covers
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we will tell you honestly before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Pipe penetrations
- Service gaps in risers
When to bring in a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Owners, agents and contractors
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios. Several sites can go on one quote, which keeps the paperwork simple.
Surface by surface
Cables and cable bundles
Cable penetrations are frequently sealed with fire-rated sealant where the detail allows. Bundle size, cable type and the space between cables all matter, so we check before sealing.
Linear joints
Head-of-wall joints often have to absorb slab deflection. We use the product and backing the detail names for that movement, along the full length of the run.
When to call us in Pittendreich
Damage plays a part too. Maintenance work can knock a seal, cut it back for an extra cable or remove it with an old pipe.
Things that normally lead to an enquiry:
- Non-fire-rated filler around services
- Openings found when ceilings come down for a refit
- Penetration schedules that need working through
- Damaged fire seals in risers and voids
In a school such as Elgin High School, fire-rated sealant goes in around service penetrations where it is specified.
What to look for in a quote
- How they’ll work around occupants
- Whether their applicators hold CSCS cards
- Proof of insurance
- Whether old or failed sealant will be cut out, not overlaid
More services for Pittendreich
Where services cross fire walls in Pittendreich
Pittendreich has three care or nursing homes no more than 2 miles away. Care homes rely on fire-resisting walls and floors, and maintenance work that breaks through them leaves openings to seal. Where that’s fire-rated sealant, we install it to the manufacturer’s tested detail. Scottish guidance (non-domestic Technical Handbook, clause 2.1.14) asks that penetrations match at least the fire resistance period of the element they pass through, and products should be tested for their end use. We install what’s specified, to the product’s tested detail.
Hospital estates such as Dr Gray's Hospital (to the north-east of Pittendreich) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail. Colleges such as Moray College UHI - Technology Centre (to the east of Pittendreich) add IT and services as courses change, and each new penetration through a fire-resisting wall needs sealing with the specified product.
Pittendreich is about 2 miles south-west of Elgin, in Moray. Looking for fire stopping in Pittendreich? We can help, as we do across Moray. Our Moray coverage takes in 59 places, from busy centres to rural villages. Aberdeen is covered too, around 57 miles from Pittendreich.
We cover the IV30 postcode districts for service penetrations. Nearby places we also cover include Miltonduff (1 mile south-west), Elgin (2 miles north-east), Ashgrove (2 miles east), Newton (2 miles north-west) and Thomshill (3 miles south-east) for service penetrations. Bigger towns within reach include Buckie (14 miles east), Forres (10 miles west), Lossiemouth (6 miles north), Burghead (7 miles north-west), Fochabers (9 miles east) and Ianstown (15 miles east). For island and remote sites, we plan travel and materials carefully, so the full address helps from the start.
Local landmarks in Pittendreich
We work on buildings around Cooper Park, among other places. For rail, the closest station is Elgin station, roughly 1.4 miles east of the centre. Other landmarks nearby include The Oaks (1 mile north) and Elgin Castle (1.3 miles north-east). For a walk, there’s Loch Spynie.