Skeete facade sealing
Commercial sealant work in Skeete for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, with a fixed quote first.
- Staining on stone next to old sealant
- Leaks at window and door perimeters
- Previous reseals run over old sealant
Facade sealing in Skeete
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Facade sealing in Skeete
Facade joints are the line of defence between the weather and the building fabric. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. The enquiries we see most involve failed seals around shopfront and entrance frames and hard, chalky sealant that no longer flexes, across perimeter joints where frames meet the structure, stone and brick facade joints and window and door perimeters. Searching for sealant specialists in Skeete? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
In the countryside around places like Skeete, conversion schemes put new frames into old stone, flint, brick or timber. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Skeete (CT18)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. They sit in the most exposed positions on the building and need a durable external sealant.
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus neutral-cure product, chosen for the frame and wall, goes in, tooled to shed water.
Why act early in Skeete
Topping up a failed joint typically buys very little time. A full cut-out and reseal costs more on the day but lasts much longer and avoids repeat call-outs. Around Skeete, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.
The price depends on how many linear metres there are, what has to come out first and the access. Call for a fixed quote when you are ready.
Why appoint us
- Standard and matched colours in many product ranges
- Work carried out by CSCS-carded applicators
- Public liability insurance in place
- Colours chosen to suit frames, cladding or finishes where possible
Read our cost guide and how we’re accredited.
Quoting for work in Skeete
These are the things that shape the price:
- Whether old sealant has to be cut out first
- The size and state of each joint
- Which sealant the job calls for
- Quantities, in metres or numbers
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What to include in your enquiry
It doesn’t need to be a full survey. These details are enough to start:
- Drawings or a marked-up plan, if available
- Anything awkward about access or site hours
- Any specification or named product
- Whether an asbestos survey exists
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Looking after the joints
Keep the joints in good shape with a few simple steps:
- Inspect facade joints on a regular cycle
- Record the product and colour used on each elevation
- Avoid patch repairs on failed facade joints
- Keep pressure washers away from fresh sealant
Record the sealant type and date on the building file. It helps when matching repairs or planning the next reseal.
Building facade joints into a maintenance cycle avoids emergency repairs. Inspect regularly and reseal sections as they start to fail instead of after the damage.
Your questions answered
Is hospital work, at somewhere like Royal Victoria Hospital, something you do?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will you fit the mastic around our build programme in Skeete?
Yes. Send the programme and drawings, and we will plan the mastic to suit the stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
When is resealing likely to be due?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
How many days will you need on site?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
Do you replace failed glazing units?
No. That work needs a glazing specialist. We reseal window perimeters, panel joints and frame-to-structure perimeters across the facade.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Mastic packages on Skeete sites
The South East is one of the drier parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so external mastic is timed for workable conditions and agreed with the site manager. Skeete lies roughly 56 miles out from central London. Building activity in the commuter belt runs from new flats near stations to business park refurbishments, so mastic packages have to keep pace with busy programmes.
For contractors at a school such as Stowting Church of England Primary School, sealing has to be finished before term starts. Extensions at sites like Royal Victoria Hospital (to the south-east of Skeete) usually sit beside working departments, and the mastic follows strict access rules. Historic houses such as Westenhanger Castle (2.7 miles south-west of Skeete) are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Skeete is about 4 miles north of Hythe, in Kent. Our applicators travel to Skeete for work on facade joints, handled exactly as we handle every other area. Across Kent, 931 places are covered, including Skeete. We also cover London, around 56 miles from Skeete.
Business premises anywhere in CT18 are within our area for facade joints. Close to Skeete, our area also takes in Woodland (1 mile north-east), Hemsted (1 mile north), Lyminge (1 mile east), Rhodes Minnis (1 mile north-east) and Postling (1 mile south). Nearby towns on our patch include Ashford (8 miles west), Canterbury (10 miles north), Dover (10 miles east), Folkestone (6 miles south-east), Faversham (15 miles north-west) and Hythe (4 miles south).
Near you in Skeete
The closest station to Skeete is Westenhanger station, roughly 2.5 miles south-west of the centre. Well-known places in the area include Royal Victoria Hospital (5.6 miles south-east) and Saltwood Castle (3.4 miles south). Green spaces nearby include Hatch Park and Tolsford Hill.
Other services in Skeete
How a job runs
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Skeete may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Getting the site ready
- Send any specification or drawings in advance
- Clear stock, furniture or equipment away from the joints
- Point out parking and an unloading spot
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.