Facade Sealing in Hemsted
Planning work on a facade joint in Hemsted? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Cold air coming in at window perimeters
- Sealant pulling away from frames or panels
- Patch repairs that keep failing
Facade sealing in Hemsted
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be any of the following:
- Installing or repairing glazing systems
- Damaged frames that need replacing
- Providing access systems for the work
If you’re not sure, just call 01277 525 020 or send details through our quote form and we’ll give you a straight answer.
Joints and surfaces we work on
- Stone and brick facade joints
- Window and door perimeters
- Cladding panel joints
- Shopfront frames
- Coping and flashing joints
- Perimeter joints where frames meet the structure
Facade sealing in Hemsted, done properly
Every facade quote starts with how the joints will be reached. Tell us about access: whether scaffold is already up, what the client is arranging, and any restrictions on the site, and we will fit the work around it. Site teams most often ask us about damp patches beside frames after rain and perimeter joints where frames meet the structure, across coping and flashing joints, stone and brick facade joints and cladding panel joints. Facilities teams, main contractors and managing agents in Hemsted tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Around smaller places like Hemsted, building work typically means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we are clear about what is covered before work starts.
- Location
- Hemsted (CT18)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Cladding panel joints
Panel joints on cladding and rainscreen systems take movement every day. We use a product rated for the movement and suited to the panel surface, as the specification sets out.
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. They sit in the most exposed positions on the building and need a durable external sealant.
Diagnose, treat, sign off
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. If others near Hemsted need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- Each joint is cut out and the edges inspected.
- Joints are cleaned, primed if required and fitted with backing rod.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
What we need from you
- Warn occupants and staff about the work
- Tell us your opening times and when work is allowed
- Agree which areas must stay open
Getting a fixed quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Read more
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Confirm the survey covers external sealants in older buildings
- Keep pressure washers away from fresh sealant
- Inspect facade joints on a regular cycle
- Keep sills, gutters and drainage paths clear
If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Ask the installer to reseal it properly with a compatible product.
In pre-2000 buildings, check the asbestos register before old sealant is cut out. Some older mastics contain it, and if it’s suspected, we stop until it has been tested.
Places near Hemsted
More services for Hemsted
Facade sealing in Hemsted: the local picture
The South East is one of the drier parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so we time external mastic for dry faces and agree it with the site team. Central London is about 56 miles from Hemsted. Towns within reach of London tend to keep building, from flats to offices and schools, which keeps mastic packages in demand.
When a school such as Stowting Church of England Primary School is extended or refurbished, the mastic package is often squeezed into the holidays.
Hemsted is about 5 miles north of Hythe, in Kent. Our applicators travel to Hemsted for work on facade joints, handled exactly as we handle every other area. We work across 931 places in Kent, large and small. There’s a separate page for London, about 56 miles away.
Work on facade joints is covered throughout CT18. Just outside Hemsted, we also work in Woodland (1 mile south-east), Skeete (1 mile south), Stowting (1 mile west), Rhodes Minnis (1 mile north-east) and Stowting Common (1 mile north-west). A short drive away, we cover Ashford (8 miles west), Canterbury (10 miles north), Dover (11 miles east), Folkestone (6 miles south-east), Whitstable (15 miles north) and Faversham (14 miles north-west).
Near you in Hemsted
Hemsted’s nearest station is Westenhanger station, about 2.9 miles south of the centre. Well-known places in the area include Saltwood Castle (4 miles south) and Elham Valley Countryside Centre And Railway Museum (3.7 miles south-east). For a walk, there’s Hatch Park and Tolsford Hill.
Your questions answered
What paperwork can you provide for a job in Hemsted?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
Is Hemsted off your patch?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
Is it okay to overlay old mastic?
No. Overlaying is a shortcut that peels away quickly. We remove the failed sealant, clean the faces, set the depth and reseal.
Signs you need facade sealing in Hemsted
Overlaying old sealant is a common shortcut that fails quickly. Fresh silicone won’t stick to cured silicone, and the patch soon lifts.
Clients normally get in touch after noticing something like this:
- Leaks at window and door perimeters
- Cold air coming in at window perimeters
- Old perimeter mastic that has dried out
- Perimeter sealant that has split or peeled away
With historic properties like Westenhanger Castle, 3.1 miles south of Hemsted, in the area, refurbishment work often meets old masonry that needs compatible sealants.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- Do they follow the manufacturer’s priming guidance?
- How long is the guarantee, and what does it include?
- Health and safety accreditation such as CHAS
How the quote is worked out
Before we quote, we look at:
- How much existing material needs removing
- Site requirements such as inductions and permits
- Whether the work must be split into stages
- Travel to remote or island sites
What a job costs comes down to how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Specification clauses that apply
- Whether the building will be occupied during the work
- Your programme or deadline
- Photos of the joints, close up and from further back
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, phone 01277 525 020 or send photos by email.