Facade and window perimeter sealing in Rickarton, Aberdeenshire
Work needed on a facade joint in Rickarton? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Discoloured or dirty facade joints
- Weathered joints at frame-to-structure perimeters
- Weathered facade joints that have lost their grip
Facade sealing across Rickarton
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Facade sealing in Rickarton, done properly
We don’t install glazing systems or replace glass. We handle the sealant joints that surround those elements: perimeter joints where frames meet the structure, panel joints and window perimeters. If you have gaps between rainscreen or cladding panels and leaks at window and door perimeters, we can help, on coping and flashing joints, perimeter joints where frames meet the structure and stone and brick facade joints alike. Whoever orders the work in Rickarton, the brief is typically the same: a clear scope, tidy work and joints that don’t fail again.
For a site around Rickarton, we plan the mastic in as few trips as the programme allows. Clear drawings, a programme and photographs let us bring the right sealants, primers and backing rod first time.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Location
- Rickarton (AB39)
- Wider area
- Aberdeenshire
- Cover
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. Where we can, we combine work around Rickarton with other jobs nearby, to make the most of each trip. Let us know if your dates have any give.
- Access, site rules and timing are settled with the client up front.
- Weather and temperature are checked against the product’s limits.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Point out any areas we must not close
- Tell us what induction or permit system the site runs
Request a quote
Pricing a project or setting a maintenance budget? We will quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or email us.
Read more
Aftercare for building managers
To get the most from the new sealant:
- Confirm the survey covers external sealants in older buildings
- Never let anyone seal over old sealant
- Investigate damp beside windows promptly
- Inspect facade joints on a regular cycle
Following storms, look inside for damp or staining near frames. An early report usually means a small reseal rather than a bigger repair.
Get the joint design right when resealing: the right width, backing rod and a sealant with enough movement capability. A well-designed joint lasts longer than a like-for-like copy of a failed one.
Surface by surface
Brick and stone facades
Stone can absorb plasticisers from the wrong sealant. The specified stone-compatible sealant is what we use, with masked edges for a clean line.
Cladding panel joints
On sealed panel systems, every joint keeps water out. Failed runs are cut out and rebuilt end to end with backing and a facade-grade sealant.
Your questions answered
Can you keep pace with our programme in Rickarton?
Yes, we work to the programme and the sequence the site sets. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Is a hospital such as Kincardine Community Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Will rain stop the work?
Rain and frost can pause external sealing. The programme allows for it and we tell you if the forecast changes things as the work goes on.
What type of sealant goes on window perimeters?
Most facade and window perimeter joints take a low-modulus neutral-cure silicone. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others, as the specification or substrate requires.
How many days will you need on site?
It depends on the scope, though a typical visit normally takes anything from a single day to several weeks, depending on joint lengths, access and the weather. Larger or phased jobs take longer, and we will give you a timescale with the quote.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is colour matching possible?
That depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Leave it or put it right?
Leaving failed perimeter sealant also makes the eventual job bigger: wet edges break down, so repairs may be needed before resealing. Early action keeps it simple. Exposed buildings in Scotland take a lot of weather, so it’s worth renewing joints around Rickarton before they leak.
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
Why clients in Rickarton choose us
- A fixed quote before work starts
- Health and safety: CHAS accredited
- Sealing commercial buildings since 2005
- Standard and matched colours in many product ranges
See what affects the cost and our accreditations.
When it isn’t the sealant
Honesty saves time and money. Fresh joints won’t solve:
- Leaks from roofs, gutters or failed flashings rather than sealant joints
- Damaged frames that need replacing
- Installing or repairing glazing systems
If you are not sure, just ring 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer.
Joints and surfaces we work on
- Perimeter joints where frames meet the structure
- Coping and flashing joints
- Window and door perimeters
- Stone and brick facade joints
- Cladding panel joints
- Shopfront frames
Site staff or a sealant specialist?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Sites and facades in and around Rickarton
In Rickarton, as across Scotland, building warrants are issued by the local authority verifier under the Scottish regulations. The mastic follows the specification that goes with the warrant. Rickarton is in the east of Scotland, which is drier than the west. Frosty spells still affect external mastic dates. External mastic is planned with the site manager for workable conditions.
New wings at hospitals like Kincardine Community Hospital, 3.2 miles south-east of Rickarton, bring long runs of window and panel joints to seal. Sites around Rickarton get mastic sealed to the drawings and the programme, nothing improvised.
Rickarton is about 13 miles south-west of Aberdeen, in Aberdeenshire. Anywhere in AB39, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Rickarton is one of 179 places in Aberdeenshire on our list for facade joints. We also cover Aberdeen, around 13 miles from Rickarton.
Commercial sites across AB39 are covered for facade joints. Sites close to Rickarton are covered too, including Redcloak (3 miles south-east), Glithno (3 miles east), Kirktown of Fetteresso (3 miles south-east), Stonehaven (3 miles south-east) and Cowie (4 miles east). Further afield, our area takes in Westhill (11 miles north), Banchory (8 miles north-west), Portlethen (8 miles north-east), Laurencekirk (13 miles south-west), Newtonhill (6 miles north-east) and Blackburn (15 miles north).
What’s near Rickarton
For rail, the closest station is Stonehaven station, about 3.4 miles south-east of the centre. Nearby you’ll also find Kincardine Community Hospital (3.2 miles south-east) and Fetteresso Castle (2.8 miles south-east). Green spaces nearby include Saddle Hill.