The Mastic Doctor team standing beside their branded vans outside an office building
Argyll and Bute · Scotland

Facade Sealing in Inverinan

Looking for facade sealing in Inverinan? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Weathered joints at frame-to-structure perimeters
  • Air leaks through failed facade joints
  • Discoloured or dirty facade joints
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
12-month guarantee on our workmanship.
South East, London & Scotland
Constructionline member
£5m public liability

Need facade sealing in Inverinan?

Photos, a specification or a quick description of the joints is enough to start a fixed quote.

Common questions from Inverinan clients

Is Inverinan too small for you to travel to?

Not at all: smaller places are covered as well as towns. We cover the whole of Scotland. Good photos up front let us bring everything on the first visit.

Can you keep pace with our programme in Inverinan?

Yes, we work to the programme and the sequence the site sets. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.

Do you hold CHAS accreditation?

Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.

What will the job cost?

It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we will price it properly.

Can you find out why a window is leaking?

Yes. We check the sealant joints and report what we find before quoting. If the water seems to come from a roof, sill or the glazing unit instead, we say so.

Do your applicators hold CSCS cards?

Yes. Our applicators hold CSCS cards, which many sites require.

Can weather delay the job?

It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.

Facade sealing for commercial buildings in Inverinan

Our facade sealing work covers external facade joints, window and door perimeters, cladding panel joints and the perimeter joints where frames meet the structure. Where sealant is the specified fix, we also take on coping and flashing joints. If you’re dealing with hard, chalky sealant that no longer flexes and gaps between rainscreen or cladding panels, we can put it right, whatever the surface. Most enquiries from Inverinan start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.

Construction around smaller Scottish places like Inverinan is often one-off schemes: a school, a health centre, a hotel extension or a few houses. The mastic still needs to suit exposed elevations and Scottish weather.

Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.

The Mastic Doctor team standing beside their branded vans outside an office building
Location
Inverinan (PA35)
Region
Argyll and Bute
Cover
12 months on our workmanship
Quote
Quoted before any work starts
Call
01277 525 020
Updated
3 November 2026

Owners, agents and contractors

We work for building owners and managing agents on everything from one building to a spread of sites around Inverinan. One quote can cover more than one site, so there’s one set of paperwork to deal with.

Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.

From enquiry to sign-off

Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building near Inverinan, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.

  1. We start with photographs, drawings or a visit to see the joints and agree access.
  2. Product choice follows the joint’s movement and substrate.
  3. The existing bead comes out in full.
  4. Primer is applied where the maker specifies it.
  5. Rod goes in to fix the depth, then the joint is sealed and tooled.
  6. The finished joints are checked with you.

Getting the site ready

  • Make sure the joints can be reached
  • Explain the parking and delivery arrangements
  • Warn occupants and staff about the work

Request a quote

Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or email the details over with what you know.

Get a quick quote

Advice

Why it’s worth doing now in Inverinan

Failed joints let in more than water: draughts around frames add to heating costs and complaints. Resealing deals with the draught as well as the leak. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Inverinan, a repair visit takes planning, so it’s better to act early.

The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a quote once you have the details.

Why us?

  • Failed material removed, not covered up
  • Standard and matched colours in many product ranges
  • CHAS accredited
  • One contact handling all your sites

Read what affects the cost or how we’re accredited.

Facades, frames and programmes in Inverinan

Projects in Inverinan follow Scotland’s building regulations, with the local authority acting as verifier. The mastic follows the specification that goes with the warrant. Inverinan is on Scotland’s wetter western side. We keep internal mastic in hand so wet days aren’t lost.

A facade joint near Inverinan lasts when width, depth and backing are right, not just the finish.

Inverinan is about 29 miles north-west of Helensburgh, in Argyll and Bute. Commercial clients in Inverinan use us for work on facade joints. 124 places across Argyll and Bute fall within our area, Inverinan among them. We also cover Glasgow, around 49 miles from Inverinan.

If you need facade sealing in PA35, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Just outside Inverinan, we also work in Ardchonnell (4 miles south), Ardbrecknish (5 miles north-east), Inveraray (8 miles south-east), Inbhir Aora (8 miles south-east) and Taynuilt (9 miles north). A short drive away, we cover Oban (11 miles north-west), Dunollie (12 miles north-west) and Dunbeg (12 miles north-west). Where a site is remote or on an island, we plan travel and materials carefully.

Local landmarks in Inverinan

Nearby you will also find Innes Chonnel Castle (3.8 miles south). Open spaces near Inverinan include Cruach Mhor and Loch Awe.

Map of Inverinan © OpenStreetMap contributors

Cost factors for facade joints

Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:

  • How much existing material needs removing
  • Location, for remote and island sites
  • Whether the work must be split into stages
  • Induction, permit and paperwork requirements

Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.

Sending details for a quote

A good diagnosis starts with the right details. Tell us:

  • The postcode of the building
  • The product your specification calls for
  • When you need the work done
  • Photos of the joints, close up and from further back

The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or give us a call on 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.

General trades versus a specialist

Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.

Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.

When to call us in Inverinan

Cohesive failure, a split through the middle of the bead, points to an over-stretched joint. The joint may be too narrow, the bead too thin or the sealant the wrong movement class.

Look out for the following:

  • Facade joints cracked through the middle
  • Staining on stone next to old sealant
  • Patch repairs that keep failing
  • Air leaks through failed facade joints

Sites around Inverinan get mastic sealed to the drawings and the programme, nothing improvised.

Questions to ask before you book

  • Which product they’ll use, and why it suits the joint
  • How the existing material will be dealt with
  • Health and safety accreditation such as CHAS
  • Whether primer will be used where the manufacturer specifies it

Our contractor checklist

Accreditations

Trusted. Accredited. Insured.