The Mastic Doctor team standing beside their branded vans outside an office building
Dundee · Scotland

Invergowrie facade sealing

Work needed on a facade joint in Invergowrie? We assess it, carry out the work and guarantee our workmanship for 12 months.

  • Facade joints cracked through the middle
  • Perimeter joints where frames meet the structure
  • Cold air coming in at window perimeters
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Signed off, with 12 months’ guarantee.
London, the South East & Scotland
Constructionline member
£5m PL insurance

Facade sealing for businesses in Invergowrie

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

What sealant work can’t fix

Honesty saves time and money. New sealant won’t cure:

  • Work on the window or framing system itself
  • Damp caused by condensation inside the building
  • Specialist high-level access methods

If you’re not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer before you book.

What we seal

  • Perimeter joints where frames meet the structure
  • Coping and flashing joints
  • Window and door perimeters
  • Shopfront frames
  • Stone and brick facade joints
  • Cladding panel joints

Facade sealing in Invergowrie, done properly

Facade joints are the line of defence between the weather and the building fabric. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. If you’re dealing with hard, chalky sealant that no longer flexes and failed seals around shopfront and entrance frames, we can help. Searching for sealant specialists in Invergowrie? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.

Construction in Scotland’s cities is a mix of new build and work to existing stone buildings. Work comes under Scotland’s own building standards, and our job is to seal to the specification.

We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.

The Mastic Doctor team standing beside their branded vans outside an office building
Place
Invergowrie (DD2)
Wider area
Dundee
Cover
12 months on every job
Quote
Fixed quote, scope in writing
Telephone
01277 525 020
Page updated
3 November 2026

Different surfaces, different methods

Brick and stone facades

Brick and stone facades have perimeter and movement joints that need a compatible sealant. We avoid acetoxy silicone, which can stain some natural stone, and primers go on where specified.

Window and door perimeters

Window and door perimeters make up most facade sealing work. A low-modulus neutral-cure product, chosen for the frame and wall, goes in.

After the work

To get the most from the new sealant:

  • Keep the sealant details on the building file
  • Keep pressure washers away from fresh sealant
  • Report water ingress at frames as soon as it shows
  • Keep sills, gutters and drainage paths clear

Look at perimeter and panel joints as part of routine building checks. Signs to look for are cracking, edges lifting, chalking and stiffness.

Building facade joints into a maintenance cycle avoids emergency repairs. Inspect regularly and reseal sections as they start to fail instead of after the damage.

Our process

A typical day starts with protection: masking tape along the joint edges and sheeting over anything nearby. On site, the work typically takes a day or two for a few elevations, and longer where access has to be moved around the building, and our waste is bagged and taken away as we go. University, hospital and office estates in Scotland’s cities have their own permits, inductions and sign-in rules. Tell us the rules and we will work to them.

  1. We start with photos, drawings or a visit to see the joints and agree access.
  2. We confirm the joint type, movement and the specified product.
  3. Failed beads are removed in full.
  4. Primer is applied where the maker specifies it.
  5. Rod goes in to fix the depth, then the joint is sealed and tooled.
  6. The finished joints are checked with you.

Getting the site ready

  • Send your site hours and access windows
  • Confirm the product named in the specification
  • Let us know about inductions and permits

Request a quote

The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email to discuss it first.

Get a quick quote

Read more

Common problems we fix in Invergowrie

Sun, rain and temperature swings wear facade sealant down over the years. UV and weather harden the sealant until it can’t stretch with the building, and cracks or adhesion loss follow.

Clients usually get in touch after noticing one or more of the following:

  • Discoloured or dirty facade joints
  • Cold air coming in at window perimeters
  • Failed sealant on precast panel joints
  • Damp patches beside frames after rain

Building work at universities like University of Dundee (to the east of Invergowrie) is often timed for the summer, mastic included.

Before you book anyone

  • The named product and why it was chosen
  • Whether their applicators hold CSCS cards
  • How they’ll work around occupants
  • Is depth set with backing rod, or bond-breaker tape in shallow joints?

How to choose a sealant contractor

Sites and facades in and around Invergowrie

Invergowrie lies within about 2 miles of the sea. On a coastal site, facade and perimeter joints face driven rain and, closer to the beach, salt, and the sealant, primer and backing need choosing with that in mind. Projects in Invergowrie follow Scotland’s building regulations, with the local authority acting as verifier. We seal to the specification that sits behind the warrant.

New wings at hospitals like Ninewells Hospital (1.2 miles east of Invergowrie) bring long runs of window and panel joints to seal. For a contractor at a hotel such as The Landmark Hotel, less than half a mile to the south-east of Invergowrie, the mastic often has to be finished before a reopening date.

Invergowrie is about 3 miles west of Dundee, in Dundee. Invergowrie sits inside our coverage and the rest of Dundee, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Dundee, 28 places are covered, including Invergowrie.

Anyone looking for facade sealing in DD2 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Main Street, Station Road and Dykes of Gray Road, and sites on any of them can send details for a fixed quote. Close to Invergowrie, our area also takes in Gowrie Park (1 mile east), Liff (1 mile north-west), Charleston (1 mile east), Ninewells (1 mile south-east) and Menzieshill (1 mile east). A short drive away, we cover Dundee (3 miles east), Broughty Ferry (8 miles east), Stobswell (4 miles east), Blackness (3 miles east), Barnhill (8 miles east) and Logie (3 miles east).

Near you in Invergowrie

The closest station to Invergowrie is Invergowrie station, about 1 mile south of the centre. A little further out are Tayside Medical History Museum (3 miles east) and Fowlis Castle (1.8 miles north-west). For a walk, there’s Piperdam Loch and Trottick Mill Ponds.

Map of Invergowrie © OpenStreetMap contributors

Your questions answered

How do tenement owners in Invergowrie get shared-part mastic done?

Typically through the property factor, once the owners have agreed. Send details and photos, and we will quote to whoever is arranging it.

Could you schedule work at a campus like University of Dundee for the vacation?

Yes, holiday working periods are the norm on campus jobs. Let us know which documents your site asks for, and we’ll confirm them alongside the quote.

Which sealant will you use?

Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.

Is colour matching possible?

In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We will confirm the colours available for the specified product.

Which sealant do you use on facades?

Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others, as the specification or substrate requires.

Can you work while the building is occupied?

Yes, as long as we plan it. Tell us your site hours and access windows and we will plan around them.

Do you hold CHAS accreditation?

Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.

Commercial clients in Invergowrie

When you manage a building on behalf of an owner, you need clear quotes and clear reporting. You get a fixed quote, an agreed scope and a walk round at the end.

Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, so there’s one set of paperwork to deal with.

Accreditations

Trusted. Accredited. Insured.