The Mastic Doctor team standing beside their branded vans outside an office building
Argyll and Bute · Scotland

Innellan facade sealing

Facade joint and window perimeter sealing on commercial buildings across Innellan, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.

  • Unsightly perimeter sealant on a visible elevation
  • Patch repairs that keep failing
  • Perimeter joints where frames meet the structure
1
Send details
Send the specification, photos or a marked-up plan.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
CHAS accredited
Fully insured: £5m PL

Facade sealing in Innellan

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

How a job runs

In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. For work around Innellan, we aim for one trip, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.

  1. Photos, drawings or a visit tell us about the joints and the access.
  2. We confirm the joint type, movement and the specified product.
  3. The existing bead comes out in full and both faces cleaned back.
  4. Primer is applied where the maker specifies it.
  5. Rod goes in to fix the depth, then the joint is sealed and tooled.
  6. The finished joints are checked with you.

What we need from you

  • Point out any areas we must not close
  • Arrange parking or a loading space
  • Send your site hours and access windows

Getting a fixed quote

Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.

Get a quick quote

Read more

Facade sealing for commercial buildings in Innellan

A good facade joint depends on design as much as product. Joint width needs to match how far the joint moves and how far the sealant can stretch, while rod fixes the depth and stops the bead sticking to the rear with the ratio the sealant maker recommends, often around 2:1. Most enquiries involve unsightly perimeter sealant on a visible elevation and sealant pulling away from frames or panels, on shopfront frames, cladding panel joints and stone and brick facade joints. One point of contact handles commercial sealant work in Innellan from the first photos to the final walk-round, for single jobs and planned programmes alike.

External sealing around Innellan depends on dry faces and the right temperature. A little flexibility in the programme lets external joints go in on suitable days.

A 12-month guarantee applies to all our work. Should something we installed fail, ring 01277 525 020 or email the details over and we’ll come back to it.

Where
Innellan (PA23)
Region
Argyll and Bute
Cover
A 12-month guarantee
Quotes
Quoted before any work starts
Call
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Innellan: questions and answers

Is hospital work, at somewhere like Cowal Community Hospital, something you do?

Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.

Is Innellan too small for you to travel to?

Not at all. Innellan is within our area. We work across every Scottish council area. Good photos up front let us bring everything on the first visit.

How long does a job like this take?

We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.

Is the work guaranteed?

Yes, for 12 months. If our installation fails in that time, we return and fix it.

Do you use silicone for external joints?

The product follows the joint’s movement, the surfaces and the specification. Specifications often refer to BS EN 15651-1 for facade sealants or BS EN 15651-2 for glazing.

Will your applicators have CSCS cards?

Yes. If you need card details for site access, let us know and we’ll send them with the quote.

How do I request a quote?

It works in four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.

Owners, agents and contractors

As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.

Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.

Contractors’ notes for Innellan

Innellan sits close to the coast, within about 1 mile. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so we check the specified product suits the exposure before the first bead. Innellan is on Scotland’s wetter western side. External mastic dates are agreed with the site manager, with internal sealant kept ready for wet days.

New wings at hospitals like Cowal Community Hospital, 5 miles north of Innellan, bring long runs of window and panel joints to seal. Older buildings in the area around Innellan, such as Castle Toward, 2.4 miles to the south-west of Innellan, need care when sealed: the product has to suit soft or historic materials.

Innellan is about 8 miles south-west of Greenock, in Argyll and Bute. Looking for facade sealing in Innellan? We can help. 124 places across Argyll and Bute fall within our area, Innellan among them. Sites around Glasgow have their own page, roughly 27 miles from Innellan.

If you need facade sealing in PA23, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Newton Road, Shore Road and Wyndham Road. Nearby places we also cover include Toward (1 mile south-west), Wemyss Bay (3 miles east), Bullwood (3 miles north), Skelmorlie (3 miles south-east) and Inverkip (4 miles east) for facade joints. Nearby towns on our patch include Helensburgh (12 miles north-east), Dunoon (5 miles north), Rothesay (5 miles south-west), Cardross (13 miles north-east), Rhu (11 miles north-east) and Garelochhead (14 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so give the site location in your enquiry.

Landmarks near Innellan

The nearest railway station is Wemyss Bay station, roughly 3 miles east of the centre. A little further out are Cowal Community Hospital (5 miles north) and Knockamillie Castle (0.6 miles north-east).

Map of Innellan © OpenStreetMap contributors

What affects the price in Innellan

These are the things that shape the price:

  • How much existing material needs removing
  • Any access equipment needed
  • Distance, for remote addresses
  • The size and state of each joint

There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.

What to include in your enquiry

A good diagnosis starts with the right details. Tell us:

  • The site address and postcode
  • Any dates the work must fit around
  • Clear photographs of the problem areas
  • The product your specification calls for

To get a fixed quote, call the office on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.

When to bring in a specialist

For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.

There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.

Surface by surface

Render and coated surfaces

Rendered and painted facades need a sound edge for the sealant to bond to. Loose coatings are cleaned back first.

Perimeter joints at frames and structure

These frame-to-structure joints take a lot of movement and weather. They are cut out, cleaned, backed and resealed with a product suited to glazing perimeters.

Honest limits

Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:

  • Arranging specialist high-level access, which is planned with the client
  • Leaks from roofs, gutters or failed flashings rather than sealant joints
  • Replacing glass or failed glazing units

If you are not sure, just speak to us on 01277 525 020 or send details through our quote form and we will give you a straight answer.

Where we work in Innellan

  • Stone and brick facade joints
  • Window and door perimeters
  • Cladding panel joints
  • Perimeter joints where frames meet the structure
  • Coping and flashing joints
  • Shopfront frames
Accreditations

Trusted. Accredited. Insured.