The Mastic Doctor team standing beside their branded vans outside an office building
Perth and Kinross · Scotland

Huntingtower facade sealing

Facade sealing in Huntingtower, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.

  • Gaps between rainscreen or cladding panels
  • Facade joints cracked through the middle
  • Staining on stone next to old sealant
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
The right sealant, to the right depth, neatly finished.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
South East, London & Scotland
CHAS accredited
£5m PL insurance

Facade sealing across Huntingtower

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

Facade sealing for commercial buildings in Huntingtower

Water ingress at window frames is a frequent reason facilities managers contact us. Very often the perimeter bead has cracked or lost its grip. We will tell you if we think the leak is coming from somewhere sealant won’t fix. The enquiries we see most involve staining on stone next to old sealant and damp patches beside frames after rain, across window and door perimeters, cladding panel joints and perimeter joints where frames meet the structure. Facilities teams, main contractors and managing agents in Huntingtower tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.

In smaller places such as Huntingtower, building work tends to be single schemes rather than big developments. The mastic still needs to suit exposed elevations and Scottish weather.

Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.

Place
Huntingtower (PH1)
Wider area
Perth and Kinross
Guarantee
12 months on every job
Quote
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026
The Mastic Doctor team beside their liveried vans in front of an office building

Leave it or put it right?

Open facade joints also let air and dirt through: occupants notice draughts and cold spots around windows. Resealing deals with the draught as well as the leak. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, so a failed joint has time to cause damage. Early resealing prevents it.

Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.

What you get with us

  • CSCS-carded applicators
  • Workmanship guaranteed for 12 months
  • Over 20 years of commercial sealing
  • Products installed to the manufacturer’s instructions

Take a look at our cost guide or our accreditations and insurance.

Facades, frames and programmes in Huntingtower

The area within 2 miles of Huntingtower holds a number of hotels. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up. In Huntingtower, as across Scotland, building warrants are issued by the local authority verifier under the Scottish regulations. Our job is to seal to that specification.

Projects at schools like Perth High School work to term dates, so mastic is programmed tightly. Hotel extensions and refits, at places such as Leonardo Boutique Hotel Huntingtower Perth (0.8 miles north-west of Huntingtower), typically run between busy periods, so the sealing is squeezed into short windows.

Huntingtower is about 1 mile west of Perth, in Perth and Kinross. Any commercial site in Huntingtower is covered. Across Perth and Kinross, 114 places are covered, Huntingtower among them. There’s a separate page for Dundee, roughly 20 miles from Huntingtower.

Work on facade joints is covered throughout PH1, whatever the building. Streets here include Dexter Road, Auld Mart Road and Preta Street. Just outside Huntingtower, we also work in Hillyland (1 mile south-east), Ruthvenfield (1 mile north), Letham (1 mile south-east), Tulloch (1 mile north-east) and Luncarty (3 miles north). Further afield, our area takes in Blairgowrie and Rattray (14 miles north-east), Crieff (14 miles west), Auchterarder (11 miles south-west), Kinross (14 miles south), Scone (3 miles east) and Coupar Angus (13 miles north-east).

Around Huntingtower

For rail, the closest station is Perth station, roughly 2.1 miles south-east of the centre. Well-known places in the area include Black Watch Castle and Museum (1.9 miles east) and St John's Shopping Centre (2.2 miles east). Open spaces near Huntingtower include Dupplin Lake and Mailer Hill.

Map of Huntingtower © OpenStreetMap contributors

What sets the cost

The price varies from site to site. It mainly depends on:

  • The site’s rules and procedures
  • Whether old sealant has to be cut out first
  • Joint width, depth and condition
  • Any access equipment needed

Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.

What to include in your enquiry

A few photos plus some basic facts will normally do. Please tell us:

  • A wide shot and a close-up of the area
  • How the joints are reached, and at what height
  • The postcode of the building
  • Any specification or named product

Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.

What we are called out for in Huntingtower

Product choice matters: an acetoxy cure can mark stone or corrode some metals, and interior products break down outdoors. Neutral-cure, facade-grade products are what most external joints need.

These are often picked up first by site or facilities staff:

  • Sealant pulling away from frames or panels
  • Patch repairs that keep failing
  • Hard, chalky sealant that no longer flexes
  • Cladding panel joints that have opened up

Hospital estates such as Perth Royal Infirmary (to the south-east of Huntingtower) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.

What to look for in a quote

  • How they handle RAMS and site documents
  • Do they follow the manufacturer’s priming guidance?
  • Will failed sealant be removed rather than covered?
  • Will CSCS-carded applicators be on site?

Our contractor checklist

Questions about Huntingtower

Do you cover business parks and estates near Huntingtower, such as Inveralmond Business Centre?

Yes. Estates, retail parks and business parks around Huntingtower, Inveralmond Business Centre among them, are all within reach. Photos and a short description are enough for a first look.

Would you work within a site like Perth Royal Infirmary?

Yes, healthcare and care buildings are part of our work. We follow the site’s permits, sign-in and infection-control procedures in every area.

Is Huntingtower in your area?

Yes. Sites across Huntingtower are covered, with one number for every area we cover.

When is resealing likely to be due?

There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.

Do you install glazing systems?

No. That work needs a glazing specialist. What we seal are the joints around frames and panels on commercial buildings.

Do you run new sealant over the existing bead?

No. New sealant won’t hold on old sealant, so the old bead is cut away and the faces are cleaned before resealing. That is what makes the new joint last.

Which sealant do you use on facades?

Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Some joints call for hybrid, PU or polysulphide instead, depending on the substrate and the specification.

On site: what to expect

In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Where we can, we combine work around Huntingtower with other jobs nearby. Tell us how flexible your dates are.

  1. We start with photos, drawings or a visit to see the joints and agree access.
  2. We confirm the joint type, movement and the specified product.
  3. Failed beads are removed in full.
  4. Primer is applied where the maker specifies it.
  5. Backing rod is fitted and the new sealant gunned in and tooled.
  6. The finished joints are checked with you.

Before we start on site

  • Tell us which areas need to stay in use
  • Clear stock, furniture or equipment away from the joints
  • For older buildings, check the asbestos register before work

Getting a fixed quote

Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote you can plan around. For a chat about it beforehand, speak to us on 01277 525 020 or send details through our quote form.

Ask for a quote

Related advice

Keeping the joints sound

Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:

  • Keep sills, gutters and drainage paths clear
  • Share access with other external trades
  • Avoid patch repairs on failed facade joints
  • Keep pressure washers away from fresh sealant

Keep a note of which product went in and when. It helps when matching repairs or planning the next reseal without guesswork.

Coordinate facade sealing with other external works. Sharing the access keeps the cost down and cuts time on site.

Commercial clients in Huntingtower

Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.

CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.

Accreditations

Trusted. Accredited. Insured.