Facade and window perimeter sealing in Holbury, Hampshire
We carry out facade joint and window perimeter sealing on commercial buildings in Holbury and the surrounding area. Send photos or drawings for a fixed quote.
- Cladding panel joints that have opened up
- Old perimeter mastic that has dried out
- New sealant peeling off old mastic
Need facade sealing in Holbury?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
What we are called out for in Holbury
Sun, rain and temperature swings wear facade sealant down over the years. The bead hardens, chalks on the surface and loses the flexibility to follow the joint, and cracks or adhesion loss follow.
Any of the following is a good reason to get the joints checked over:
- Perimeter sealant that has split or peeled away
- Weathered joints at frame-to-structure perimeters
- Cladding panel joints that have opened up
- Unsightly perimeter sealant on a visible elevation
Projects at colleges like Totton College Waterside Centre (2.2 miles north-west of Holbury) tend to run to term dates, so the mastic is planned tightly.
What your quote should include
- How joint depth will be controlled
- Whether their applicators hold CSCS cards
- Their public liability cover
- Their pre-qualification and accreditations
How we handle facade sealing in Holbury
Weather decides a lot in facade sealing. The sealant needs a dry joint and temperatures inside the maker’s limits, so frosty or damp mornings can hold work back. We plan for that and keep you updated. If you have damp patches beside frames after rain and new sealant peeling off old mastic, we can put it right, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Holbury it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
On a small site around Holbury, the mastic is best done in the fewest visits we can manage. Tell us when scaffold comes down and when decoration finishes, and we will plan around those stages.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Holbury (SO45)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Towns and villages near Holbury
What else we do in Holbury
When to bring in a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
FAQs: Holbury
Is a smaller place like Holbury outside your area?
No. Places such as Holbury are covered as much as the big towns. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Do you cover business parks and estates near Holbury, such as Glenmore Business Park?
Yes, sites like Glenmore Business Park are within our area, along with the rest of Holbury. To start, just ring 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Do you install glazing systems?
No. A glazing contractor handles that. What we seal are the joints around frames and panels across the facade.
What do you charge?
We don’t publish prices, because every site is different. Send photos or drawings and we will price it at a fixed figure.
Are you insured?
Yes. We’re fully insured, including public liability cover.
Can you work in cold or wet weather?
We can work through the year, but sealant needs a dry joint and temperatures within the product’s range. Frost and condensation on glass and steel are common on winter mornings, so we plan around the forecast.
Do you provide access for facade work?
Access is planned with you before we quote. Let us know what access is in place or planned, and we’ll price the work around it.
How the job changes by surface
Window and door perimeters
Frames grow and shrink with temperature, and the perimeter joint has to follow. The rod limits depth, leaving the bead able to flex.
Coping and flashing joints
Sometimes the coping or flashing itself has failed. Where the issue isn’t the sealant, we say so.
Mastic packages on Holbury sites
The sea is no more than about 2 miles from Holbury. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so we check the specified product suits the exposure before the first bead. Rainfall across the South East, Holbury included, is lower than in many parts of the UK. Winter mornings still bring frost and condensation on frames and panels, which is why external dates are agreed with the site manager.
For a contractor at a hotel such as Falcon Hotel, 1.5 miles to the east of Holbury, the mastic often has to be finished before a reopening date. For contractors at a school such as Cadland Primary School, sealing has to be finished before term starts.
Holbury is about 2 miles south of Hythe, in Hampshire. Across the SO45 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Hampshire, 723 places are covered, including Holbury. There’s a separate page for Southampton, roughly 6 miles from Holbury.
We cover the SO45 postcode districts. Buildings on Beechwood Road, Park Hill Close and Pondhead Close are within our area. Just outside Holbury, we also work in Little Holbury (1 mile north-west), Roughdown (1 mile south), Hardley (1 mile north), Blackfield (1 mile south-east) and Langley (1 mile south). A short drive away, we cover Gosport (10 miles east), Eastleigh (10 miles north), Fareham (8 miles east), Totton (8 miles north-west), Chandler's Ford (11 miles north) and Hedge End (7 miles north-east).
What’s near Holbury
We work on buildings around The New Forest Academy and the streets around them. The closest station to Holbury is Netley station, roughly 3.8 miles north-east. A little further out are Beaulieu Abbey And Display Of Monastic Life (3.1 miles west) and Calshot Castle (3.4 miles east). Green spaces nearby include Mercury Marshes.
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. We inspect the joints and confirm what’s in scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Work in places the size of Holbury is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- We plan access and the order of elevations with the client.
- Weather and temperature are checked against the product’s limits.
- Each joint is cut out and the edges inspected.
- Joints are cleaned, primed if required and fitted with backing rod.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
Getting the site ready
- Flag any permit to work we’ll need
- Tell staff and tenants when we’ll be in
- Move anything stored against the joints
Get a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or send photos by email.
Related advice
Why act early in Holbury
Failed joints let in more than water: occupants notice draughts and cold spots around windows. A new seal closes the gap for both. For buildings in places like Holbury, one well-planned visit beats several small ones, so it’s worth dealing with every failing joint at once.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Why appoint us
- RAL and finish matching where the product range allows
- Health and safety: CHAS accredited
- Products installed to the manufacturer’s instructions
- One phone line for London, the South East and Scotland
See how commercial sealant jobs are priced or our accreditations and insurance.
Cost factors for facade joints
Quotes vary with the job. Expect it to depend on:
- Location, for remote and island sites
- Whether old sealant has to be cut out first
- Site requirements such as inductions and permits
- The product specified
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote, and you’ll have a fixed figure to work with.
What to include in your enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Drawings or a marked-up plan, if available
- Your programme or deadline
- The site address and postcode
- Whether the building will be occupied during the work
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, call the office on 01277 525 020 or email us.