Facade and window perimeter sealing in Great Tew, Oxfordshire
Facade joint and window perimeter sealing on commercial buildings across Great Tew, by CSCS-carded applicators. CHAS accredited and fully insured.
- Old perimeter mastic that has dried out
- Cladding panel joints that have opened up
- Perimeter sealant that has split or peeled away
Need facade sealing in Great Tew?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our facade sealing in Great Tew
Facade sealants sit in the sun, rain and frost every day, so they don’t last indefinitely. How long a joint lasts depends on the movement it takes, its exposure, the product and how well it was installed. When the time comes, we cut the old sealant out completely and start again. Most enquiries involve damp patches beside frames after rain and perimeter joints where frames meet the structure, on shopfront frames, perimeter joints where frames meet the structure and stone and brick facade joints. One point of contact handles commercial sealant work in Great Tew from the first photos to the final walk-round, whether it’s one building or several.
Conversions of older rural buildings near smaller places such as Great Tew bring stone, flint, brick and timber up against new glazing. A product that grips an irregular face, with a colour that suits the building’s character, is normally what’s needed.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Place
- Great Tew (OX7)
- Wider area
- Oxfordshire
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Diagnose, treat, sign off
Before any cutting starts, the area is protected: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work normally takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather, and we clear our waste as we work. Jobs in and around smaller places like Great Tew are typically planned as a single visit, so photos and measurements up front really help. That way the right products come on the day.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- We go over the completed work with you before leaving.
What we need from you
- Let us know about inductions and permits
- Make sure the joints can be reached
- Send asbestos survey details if the building is pre-2000
Ask for a quote
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we’ll fill any gaps with a visit.
Read more
Building and refurbishing in Great Tew
At about 65 miles from central London, Great Tew is within reach of the capital. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme. Rainfall across the South East, Great Tew included, is lower than in many parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so the external programme keeps a little slack.
For contractors at a school such as Great Tew County Primary School, sealing has to be finished before term starts.
Great Tew is about 8 miles south-west of Banbury, in Oxfordshire. Businesses, contractors and managing agents in Great Tew can call on us for facade joints, as part of our coverage of Oxfordshire. Our Oxfordshire coverage takes in 423 places, large and small. Oxford is covered too, some 17 miles away.
Anyone looking for facade sealing in OX7 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. For a building on The Square, Old Road and New Road or nearby, we can quote for facade joints. Close to Great Tew, our area also takes in Little Tew (1 mile south-west), Swerford (2 miles north-west), Wigginton (2 miles north), South Newington (3 miles north) and Church Enstone (3 miles south). A short drive away, we cover Banbury (8 miles north-east), Bicester (12 miles east), Witney (12 miles south), Carterton (15 miles south-west), Kidlington (11 miles south-east) and Bure Park (12 miles east).
Local landmarks in Great Tew
Around Great Tew, our work takes us to commercial buildings near The Falkland Arms Public House. A little further out are Old Forge Museum (Great Tew) (less than half a mile north) and Deddington Castle (4.9 miles east). Green spaces nearby include Woodford Bottom and Lamb's Pool.
Different surfaces, different methods
Precast concrete panels
Concrete edges can be dusty or weak. We clean back to sound material and flag edges that need repair first.
Cladding panel joints
Joints between cladding panels open and close with temperature. We use a product rated for the movement and suited to the panel surface, as the specification sets out.
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first, and our applicators hold CSCS cards.
Places near Great Tew
More services for Great Tew
Your questions answered
Can you work at a site such as Enstone Airfield Industrial Estate, by Great Tew?
Yes, sites like Enstone Airfield Industrial Estate are within our area, along with the rest of Great Tew. A few photos and the unit address let us price the work.
Can you work to our programme on a site in or near Great Tew?
Yes, we work to the programme and the sequence the site sets. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can staff carry on working while you are here?
In the majority of cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Do you replace windows or glass?
No. We don’t install glazing systems, windows or glass. We seal the joints around them, such as perimeter joints where frames meet the structure.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call the office on 01277 525 020 or email a schedule or drawings. Include photographs or drawings if you have them.
When can you be on site?
The office is staffed Monday to Friday, from 8am until 5pm. Let us know your site hours and access windows, and the work will be planned around them.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Movement beyond what any sealant can handle
- Providing access systems for the work
- Installing or repairing glazing systems
Not sure which it is? You can phone 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Surfaces we seal
- Coping and flashing joints
- Stone and brick facade joints
- Shopfront frames
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
When to call us in Great Tew
Most facade joints fail through age and weathering. The bead hardens, chalks on the surface and loses the flexibility to follow the joint, and cracks or adhesion loss follow.
It’s worth sending us details if you spot any of the following:
- Air leaks through failed facade joints
- Perimeter sealant that has split or peeled away
- Damp patches beside frames after rain
- New sealant peeling off old mastic
When units on a site such as Enstone Airfield Industrial Estate (to the south of Great Tew) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package.
What to look for in a quote
- Proof of insurance
- Whether old or failed sealant will be cut out, not overlaid
- How the joint faces will be prepared and primed
- How joint depth will be controlled
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Distance, for remote addresses
- The size and state of each joint
- Induction, permit and paperwork requirements
- The total length or number of joints
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Where the site is, with the postcode
- What the building is and how it’s used
- Clear photographs of the problem areas
- Whether an asbestos survey exists
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we’ll arrange one.