Facade Sealing contractors in Golders Green
Looking for facade sealing in Golders Green? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Previous reseals run over old sealant
- Hard, chalky sealant that no longer flexes
- Perimeter sealant that has split or peeled away
Facade sealing for Golders Green sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facade sealing for commercial buildings in Golders Green
Facade sealants sit in the sun, rain and frost every day, and they wear out over time. How long a joint lasts depends on the movement it takes, its exposure, the product and how well it was installed. When the time comes, we cut the old sealant out completely and start again. We work on cladding panel joints, shopfront frames and stone and brick facade joints, and what we are called in for most is air leaks through failed facade joints and facade joints cracked through the middle. Looking for mastic applicators who cover Golders Green? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
A great deal of London construction is refurbishment of occupied or part-occupied buildings, alongside new blocks. Replacement windows, recladding and fit-outs leave perimeter and facade joints to seal, often next to people still using the building, so tidy, well-planned work matters.
Every job is signed off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Place
- Golders Green (NW11, NW2, NW3)
- Region
- Greater London
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Facade sealing around Golders Green: points for this area
There are a good number of hotels within about 2 miles of Golders Green. Hotel extensions and refits typically have to fit around bookings, so mastic dates are tight. The ULEZ covers the whole of Greater London, Golders Green included, so site vehicles need to meet its standards or pay the daily charge. Deliveries are booked and storage is tight, so mastic materials come in as needed.
For a contractor working at a hospital such as Nuffield Health Highgate Hospital (1.8 miles east of Golders Green), perimeter and facade sealing is planned around patients and deliveries. University estates such as Middlesex University, 2.4 miles north-west of Golders Green, tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal.
Golders Green is about 1 mile north of West Hampstead, in Greater London. Businesses, contractors and managing agents in Golders Green can call on us for facade joints, as part of our coverage of Greater London. 764 places across Greater London fall within our area, including Golders Green. We also cover London, around 7 miles from Golders Green.
Work on facade joints is covered throughout NW11, NW2 and NW3, whatever the building. We cover commercial and managed buildings on Nant Road, Hoop Lane and Park Avenue. Just outside Golders Green, we also work in Temple Fortune (1 mile north), Childs Hill (1 mile south), North End (1 mile south-east), Hampstead Garden Suburb (1 mile north-east) and Vale of Health (1 mile south-east). Bigger towns within reach include London (7 miles south-east), City of Westminster (5 miles south-east), Marylebone (4 miles south-east), Kensington (5 miles south), St Pancras (5 miles south-east) and Shoreditch (6 miles south-east).
Local landmarks in Golders Green
Locally, jobs take us to sites close to Childs Hill Park, The King Alfred School and The Old Bull and Bush pub, among other places. The closest station to Golders Green is Cricklewood station, about 1.2 miles south-west. A little further out are Kenwood House (1.3 miles east) and Brent Cross Shopping Centre (1.1 miles west). The countryside around Golders Green includes Parliament Hill and Darland's Lake.
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. The ULEZ covers the whole of Greater London, and parking near a job is rarely simple. Let us know about any on-site parking or loading arrangements when you send the job details.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Preparing the site
- Send your site hours and access windows
- Point out any areas we must not close
- Warn occupants and staff about the work
Get a fixed quote
For a fixed quote, ring 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
General trades versus a specialist
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Cost factors for facade joints
Each job is priced on its own details. The main factors are:
- How much there is to seal
- Working within restricted access windows
- The size and state of each joint
- Any access equipment needed
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What to include in your enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- Whether an asbestos survey exists
- Photos of the joints, close up and from further back
- How the joints are reached, and at what height
- Any specification or named product
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, speak to us on 01277 525 020 or email a schedule or drawings.
Towns and villages near Golders Green
Other services in Golders Green
Golders Green: questions and answers
Do you take on jobs in Golders Green where loading and access are tightly controlled?
Yes. Booked loading bays, goods lifts and permit-to-work systems are normal for London jobs. The building manager’s rules go straight into our method. The ULEZ covers the whole of Greater London, which we allow for
Could you schedule work at a campus like Middlesex University for the vacation?
Yes. We plan campus work around teaching, exams and residence turnarounds. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Are you fully insured?
Yes. We are fully insured, including public liability cover.
Can weather delay the job?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
How long do sealant joints last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Honest limits
We check first that sealant really is the fix. It won’t put right:
- Providing access systems for the work
- Work on the window or framing system itself
- Water getting in through cracked render or porous masonry
Not sure which it is? You can speak to us on 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Surfaces we seal
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Shopfront frames
- Stone and brick facade joints
- Cladding panel joints
Signs you need facade sealing in Golders Green
Most facade joints fail through age and weathering. UV and weather harden the sealant until it can’t stretch with the building.
Site and facilities staff are often the first to spot these:
- Failed sealant on precast panel joints
- Damp patches beside frames after rain
- Unsightly perimeter sealant on a visible elevation
- Weathered joints at frame-to-structure perimeters
Further education sites such as College of North West London (2.5 miles south-west of Golders Green) are extended and refurbished from time to time, with mastic often programmed into the summer break.
What to look for in a quote
- Will failed sealant be removed rather than covered?
- Will RAMS and insurance details be available?
- Do they follow the manufacturer’s priming guidance?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Maintenance after handover
Problems stay small when the joints are checked regularly. In particular:
- Keep the sealant details on the building file
- Check the asbestos register before old mastic is disturbed
- Add perimeter sealant to planned maintenance checks
- Share access with other external trades
Include facade joints in your planned maintenance inspections. Watch for splits, gaps at the edges, hardening and discolouration; note where they appear.
Tie resealing in with redecoration, cladding repairs or other access. Sharing the access keeps the cost down and limits disruption.