Fair Cross facade sealing
Facade sealing in Fair Cross, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Facade joints cracked through the middle
- Discoloured or dirty facade joints
- Air leaks through failed facade joints
Facade sealing for Fair Cross sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
How a job runs
Before we leave any area, we remove the tape, clean down and inspect every joint. Where the sealant needs time to cure before use, we tell you and sign the area. For a building around Fair Cross, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We plan access and the order of elevations with the client.
- Weather and temperature are checked against the product’s limits.
- We remove the old bead and check the edges are sound.
- Joints are cleaned, primed if required and fitted with backing rod.
- Facade-grade sealant goes in and is tooled to a tidy concave profile.
- We hand over with our 12-month workmanship guarantee.
Getting the site ready
- Tell us what induction or permit system the site runs
- Agree which areas must stay open
- Arrange parking or a loading space
Get a fixed quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or use the quote form.
Read more
Facade sealing in Fair Cross, done properly
External joints face UV, rain, temperature swings and building movement all year, so they don’t last indefinitely. How long a joint lasts depends on the movement it takes, its exposure, the product and how well it was installed. When the time comes, we cut the old sealant out completely and start again. Site teams most often ask us about weathered facade joints that have lost their grip and leaks at window and door perimeters, across cladding panel joints, perimeter joints where frames meet the structure and window and door perimeters. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Fair Cross, preparation and product choice get the time they need.
In the countryside around places like Fair Cross, conversion schemes put new frames into old stone, flint, brick or timber. A product that grips an irregular face, with a colour that suits the building’s character, is typically what’s needed.
Every job we finish is backed by a 12-month workmanship guarantee, in Fair Cross as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Fair Cross (RG7)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Also near Fair Cross
What else we do in Fair Cross
Facade sealing in Fair Cross: the local picture
The South East is one of the drier parts of the UK. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, which is why external dates are agreed with the site manager. Fair Cross lies roughly 40 miles out from central London. Towns within reach of London tend to keep building, from flats to offices and schools, so mastic packages have to keep pace with busy programmes.
Older buildings in the area around Fair Cross, such as Stratfield Saye House, 0.7 miles to the south of Fair Cross, need care when sealed: the product has to suit soft or historic materials.
Fair Cross is about 6 miles east of Tadley, in Hampshire. Fair Cross sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. Across Hampshire, 723 places are covered, including Fair Cross. We also cover Reading, some 6 miles away.
Business premises anywhere in RG7 are within our area. If your building is just outside Fair Cross, we cover Stratfield Saye (1 mile south-west), West End Green (2 miles west), Stratfield Mortimer (2 miles north-west), Spanish Green (2 miles south) and Wokefield (3 miles north-west). Nearby towns on our patch include Basingstoke (8 miles south-west), Farnborough (11 miles south-east), Fleet (9 miles south-east), Aldershot (13 miles south-east), Alton (15 miles south) and Yateley (7 miles east).
Around Fair Cross
Fair Cross’s nearest station is Mortimer station, roughly 1.7 miles north-west. Nearby you will also find Beaumys Castle (1.5 miles north-east). For a walk, there’s The Marshes Local Nature Reserve and Longwater.
What the job involves on each surface
Cladding panel joints
Panel joints on cladding and rainscreen systems take movement every day. The sealant has to match the movement and the panel finish, as the specification sets out.
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus neutral-cure product, chosen for the frame and wall, goes in finished to throw water off the joint.
Owners, agents and contractors
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Questions about Fair Cross
Is Fair Cross too far out for you?
No. Places such as Fair Cross are covered as much as the big towns. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you keep pace with our programme in Fair Cross?
Yes, we work to the programme and the sequence the site sets. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Do you install glazing systems?
No. A glazing contractor handles that. What we seal are the joints around frames and panels across the facade.
Can you find out why a window is leaking?
Yes. Photos are often enough to start, followed by a visit if needed. Many frame leaks are sealant failures, though not all, and we will tell you which.
Can you work while the building is occupied?
Normally, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
Signs you need facade sealing in Fair Cross
Sun, rain and temperature swings wear facade sealant down over the years. The bead hardens, chalks on the surface and loses the flexibility to follow the joint.
What tends to prompt an enquiry:
- Staining on stone next to old sealant
- Weathered facade joints that have lost their grip
- Damp patches beside frames after rain
- Facade joints cracked through the middle
Recladding or extending a unit at a site like Riseley Business Park (1.7 miles east of Fair Cross) brings panel joints and frame perimeters into the programme.
Before you book anyone
- How the existing material will be dealt with
- What level of public liability insurance do they hold?
- Will RAMS and insurance details be available?
- Health and safety accreditation such as CHAS
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Insist on a full cut-out when joints are renewed
- Don’t wait for a second leak before calling
- Note when each elevation was last resealed
- Clear debris that holds water against joints
If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Ask the installer to reseal it properly.
Coordinate facade sealing with other external works. One set-up for several trades saves money.
Why act early in Fair Cross
Topping up a failed joint normally buys very little time. A full cut-out and fresh bead is the repair that holds. Converted and older buildings near places like Fair Cross tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
Why appoint us
- Failed material removed, not covered up
- One contact handling all your sites
- 12 months’ guarantee on every job
- Coloured sealants to suit the setting, where available
Read our cost guide and our accreditations.