Facade and window perimeter sealing in Empshott, Hampshire
Sealant work in Empshott for main contractors, managing agents and facilities managers: facade joint and window perimeter sealing on commercial buildings, with a fixed quote first.
- Unsightly perimeter sealant on a visible elevation
- Perimeter sealant that has split or peeled away
- Old perimeter mastic that has dried out
Facade sealing for businesses in Empshott
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facade sealing in Empshott, done properly
Facade sealants sit in the sun, rain and frost every day. Life depends on movement, weathering, product choice and the quality of the original work. When it fails, the whole bead is cut away and the joint rebuilt. We work on shopfront frames, cladding panel joints and stone and brick facade joints, and the failures we are asked to look at most are perimeter joints where frames meet the structure and draughts around frames and panels. A single leaking joint is often how a building in Empshott first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a site near Empshott, the mastic visit is planned so the right sealants, primers and backing rod are on hand, timed to the stage the job has reached. Drawings, photographs and the programme let us give a fixed quote.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Empshott (GU33)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Keeping the joints sound
A few simple habits keep the new joints working:
- Avoid harsh cleaners on facade sealant
- Plan facade sealing alongside redecoration
- Note when each elevation was last resealed
- Inspect facade joints on a regular cycle
Blocked sills and gutters push water at the joints. Good drainage keeps water moving off the facade rather than sitting against the joints.
Coordinate facade sealing with other external works. One set-up for several trades saves money.
Do you need facade sealing in Empshott?
When the sealant tears down its centre, it has normally been asked to move more than it can. The joint may be too narrow, the bead too thin or the sealant the wrong movement class.
Things that normally lead to an enquiry:
- Hard, chalky sealant that no longer flexes
- Sealant pulling away from frames or panels
- Air leaks through failed facade joints
- Discoloured or dirty facade joints
New units and refits on sites such as Ham Barn Business Park (to the south-east of Empshott) need their panel and perimeter joints sealed to the specification.
What to look for in a quote
- Will RAMS and insurance details be available?
- The terms of the workmanship guarantee
- How the joint faces will be prepared and primed
- Health and safety accreditation such as CHAS
How the job changes by surface
Brick and stone facades
Joints in natural stone need care to avoid staining. We use a product suitable for the stone where the specification names one.
Render and coated surfaces
Paintable sealants exist for joints that will be coated. We confirm the product with you before starting.
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Jobs in and around smaller places like Empshott are normally planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full.
- Primer is applied where the maker specifies it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Before we start on site
- Share the asbestos register for older buildings
- Let building users know which areas are affected
- Have the specification and drawings to hand
Request a quote
For a fixed quote, ring 01277 525 020 or email the details over, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
Empshott: questions and answers
Is Empshott too far out for you?
Not at all. Empshott is within our area. London and every South East county are within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work at a site such as Ham Barn Business Park, by Empshott?
Yes. Our area takes in Empshott and its surroundings, with estates and business parks such as Ham Barn Business Park included. A few photos and the unit address let us price the work.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you seal on top of existing sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
Do we need an asbestos check before resealing?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. The dutyholder’s asbestos register should be checked first. Removal of asbestos isn’t something we do.
Can you find out why a window is leaking?
Yes. We look at the perimeter sealant and tell you whether it has failed as part of pricing. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
Owners, agents and contractors
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Sites and facades in and around Empshott
Empshott is in the South East, one of the UK’s drier regions. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so we time external mastic for dry faces and agree it with the site team. Empshott is about 46 miles from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, which keeps mastic packages in demand.
For a contractor working at a hospital such as Chase Community Hospital, 3.3 miles north-east of Empshott, perimeter and facade sealing is planned around patients and deliveries.
Empshott is about 5 miles north of Petersfield, in Hampshire. Businesses, contractors and managing agents in Empshott can call on us for facade joints. Empshott is one of 723 places we cover in Hampshire for facade joints. There’s a separate page for Portsmouth, roughly 20 miles from Empshott.
Commercial sites across GU33 are covered for facade joints. Buildings on Mill Lane and Church Lane are within our area. Sites close to Empshott are covered too, including Lower Green (1 mile south-west), Hawkley (2 miles south), Selborne (2 miles north-west), Newton Valence (2 miles west) and Oakshott (2 miles south-west). Further afield, our area takes in Basingstoke (15 miles north-west), Havant (15 miles south), Fleet (14 miles north), Horndean (12 miles south), Aldershot (14 miles north-east) and Alton (5 miles north-west).
Local landmarks in Empshott
Empshott’s nearest station is Liss station, roughly 2.7 miles south-east of the centre. Nearby you’ll also find Chase Community Hospital (3.3 miles north-east) and The Romany Museum (1.5 miles north-west). For a walk, there’s Liss Riverside Railway Walk North and Selborne Hill.