Egham Wick facade sealing
Commercial sealant work in Egham Wick for contractors, FMs and building owners: facade joint and window perimeter sealing on commercial buildings, quoted at a fixed price.
- Facade joints cracked through the middle
- Weathered joints at frame-to-structure perimeters
- Patch repairs that keep failing
Need facade sealing in Egham Wick?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Different surfaces, different methods
Perimeter joints at frames and structure
Where framed systems such as shopfronts meet the building structure, there is a perimeter joint to seal. We seal those perimeter joints rather than the system it surrounds.
Brick and stone facades
Stone can absorb plasticisers from the wrong sealant. We use a product suitable for the stone where the specification names one, and mask the edges carefully.
Facade sealing in Egham Wick, done properly
We don’t install glazing systems or replace glass. What we seal are the joints around them: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds with products suited to facade or glazing perimeter joints. We work on cladding panel joints, coping and flashing joints and shopfront frames, and the failures we’re asked to look at most are weathered joints at frame-to-structure perimeters and weathered facade joints that have lost their grip. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Egham Wick is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places like Egham Wick, building work normally means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Where
- Egham Wick (TW20)
- Wider area
- Surrey
- Guarantee
- 12 months on our workmanship
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Share access with other external trades
- Check that rainwater leaves the facade the way it was designed to
- Insist on a full cut-out when joints are renewed
- Note when each elevation was last resealed
Keep gutters, sills and drainage paths clear. Good drainage keeps water moving off the facade.
Use each reseal to correct the joint: the right width, backing rod and a sealant with enough movement capability. Repeating a faulty detail just repeats the failure.
Your questions answered
Can you work at a site such as Egham Business Park, by Egham Wick?
Yes. We cover Egham Wick and the area around it, including industrial estates, business parks and retail parks such as Egham Business Park. Send details of the unit and the work through our quote form for a quick quote.
Is Egham Wick off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
How many days will you need on site?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Do we need an asbestos check before resealing?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register, so ask for it before we start. Suspect material is left alone until it has been tested.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
Is it okay to overlay old mastic?
No. New sealant won’t hold on old sealant, so the old bead is cut away and the joint cleaned back to sound material. Nothing else gives a bond that lasts.
How long do sealant joints last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Sites and facades in and around Egham Wick
Egham Wick is about 22 miles from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, and each scheme needs its mastic sealed to programme. Egham Wick sits in one of the drier corners of the country, the South East. Even so, frost and condensation on steel and glass are common on winter mornings, so the external programme keeps a little slack.
When a college such as Strode's College (to the north-east of Egham Wick) builds or refurbishes, the mastic package typically has to fit around students and staff. For contractors on a campus like Royal Holloway University, 1 mile east of Egham Wick, facade and perimeter sealing has to fit around students and term dates. On a healthcare site such as King Edward VII Hospital, 3.8 miles north of Egham Wick, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
Egham Wick is about 2 miles west of Egham, in Surrey. Commercial clients in Egham Wick can call on us for facade joints. Our Surrey coverage takes in 379 places. Our Reading page has more on work in that area.
We cover the TW20 postcode districts. For a building on Wick Lane and Wick Road or nearby, send details and we will quote for facade joints. Close to Egham Wick, our area also takes in Englefield Green (1 mile north-east), Bishopsgate (1 mile north), Wentworth (2 miles south), Stroude (2 miles south-east) and Virginia Water (2 miles south-east). Nearby towns on our patch include Guildford (12 miles south), Woking (7 miles south), Camberley (9 miles south-west), Epsom (15 miles south-east), Ewell (15 miles east) and Walton-on-Thames (8 miles east).
What’s near Egham Wick
Around Egham Wick, our work takes us to commercial buildings near Riverside Walk and The Barley Mow Public House and the streets around them. The closest station to Egham Wick is Virginia Water station, about 1.8 miles south-east of the centre. A little further out are Spelthorne Museum (3.2 miles east) and Windsor Castle (4.3 miles north). Green spaces nearby include Gracious Pond and St Ann's Hill.
What sets the cost
We price every job individually. The things that drive the figure:
- Any access equipment needed
- Induction, permit and paperwork requirements
- Backing rod, priming and other preparation
- Travel to remote or island sites
A quote for facade joints depends on how many there are, their condition and the access, plus any specification you are working to. Call for a quote.
Before you send an enquiry
A few photographs plus some basic facts will normally do. Please tell us:
- The site address and postcode
- Clear photographs of the problem areas
- Anything awkward about access or site hours
- Your programme or deadline
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To start the process, call 01277 525 020 or email us.
Nearby places to Egham Wick
What else we do in Egham Wick
Commercial clients in Egham Wick
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
On site: what to expect
In a busy building, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then handed back before the next one starts. Jobs in and around smaller places like Egham Wick are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- Access, site rules and timing are settled with the client up front.
- Weather and temperature are checked against the product’s limits.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- Confirm the product named in the specification
- Let us know about inductions and permits
- Share the asbestos register for older buildings
Quotes
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to give us a call on 01277 525 020 or email a schedule or drawings.
Advice
Should maintenance staff do it?
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.