Expansion joint sealing in Egham Wick
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Egham Wick. Send photographs or drawings for a fixed quote.
- Joints where the bead has lost adhesion
- Car park joints leaking onto vehicles below
- Debris jammed in movement joints
Need expansion joint sealing in Egham Wick?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
What happens if it’s left?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. We will flag where edges need repair before sealing. Halls, stores and units around places like Egham Wick may not be checked every day, which gives a failed joint time to do damage. Resealing early avoids that.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why clients in Egham Wick choose us
- Commercial sealant work since 2005
- Constructionline member
- CHAS accredited
- One phone line for London, the South East and Scotland
See what affects the cost or our accreditations and insurance.
Expansion joint sealing in Egham Wick, done properly
Mastic Doctor has sealed movement joints since 2005. Our applicators are CSCS-carded, we are CHAS accredited and a Constructionline member, and we carry five million pounds of public liability insurance. Workmanship is backed by our 12-month guarantee. If you are dealing with previous reseals laid over old sealant and sealant pulling off the joint face, we can help. One point of contact handles commercial sealant work in Egham Wick from the first photographs to the final walk-round, whether it’s one building or several.
Halls, schools and small commercial buildings near places like Egham Wick have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Egham Wick (TW20)
- Region
- Surrey
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Your questions answered
Is Egham Business Park, near Egham Wick, within your area?
Yes. We cover Egham Wick and the area around it, including industrial estates, business parks and retail parks such as Egham Business Park. A few photos and the unit address let us price the work.
Do you take on work at healthcare sites like King Edward VII Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Can you work while the building is occupied?
In the majority of cases, yes. We phase the work so most of the building stays in use, with each area protected and signed.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
Diagnose, treat, sign off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Egham Wick, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- Photos, joint lengths and drawings come to us, or we visit.
- Joint widths and expected movement are checked against what the sealant can take and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Send your site hours and access windows
- Send asbestos survey details if the building is pre-2000
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Site staff or a sealant specialist?
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we’ll confirm the paperwork you need with the quote.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Do you need expansion joint sealing in Egham Wick?
Sun, rain and frost age external movement joints. UV hardens the surface, and the sealant loses its ability to stretch and opens at the next temperature swing.
Things that normally lead to an enquiry:
- Damp inside where a wall movement joint has failed
- Weathered movement joint sealant that no longer flexes
- Water dripping through deck or ramp joints
- Joints where the bead has lost adhesion
Across sites such as Thorpe Industrial Estate (2.5 miles east of Egham Wick), floor and movement joints can be sealed in phases so units keep working.
Questions to ask before you book
- Their public liability cover
- Are they CHAS accredited or on Constructionline?
- Can the work be phased to keep areas open?
- How they handle RAMS and site documents
Nearby places to Egham Wick
Other services in Egham Wick
Honest limits
We check first that sealant really is the fix. It isn’t the answer for:
- Changing the joint layout or spacing of a structure
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Crumbling edges that would give a new bead nothing sound to grip
If in doubt, call the office on 01277 525 020 or email a schedule or drawings and we will say what we think.
What we seal
- Podiums and floor movement joints
- Cladding panel joints
- Car park decks and ramps
- Blockwork control joints
- Precast concrete panel joints
- Brickwork movement joints
Looking after the joints
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Act on the first tear or lifting edge rather than waiting
- Avoid parking heavy plant or pallets on joint lines
- Clear dirt from joint lines during routine cleaning
- Leave barriers in place until fresh joint sealant has cured
In warehouses, forklift and pallet-truck routes take the most wear. Keep racking feet and heavy point loads off joint lines and flag chipped arrises before they spread.
On a multi-storey car park, a failed joint usually shows up as a leak onto the deck underneath. Salty water dripping through stains soffits and lands on parked vehicles and it can affect the structure over time. Sealing the joint promptly stops it at source.
Expansion joint sealing in Egham Wick: the local picture
Egham Wick has at least three named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and gritting in cold spells finds its way into open joints.
Sites like King Edward VII Hospital, 3.8 miles to the north of Egham Wick, carry ambulances, deliveries and visitors’ cars over their road and deck joints. Schools such as St Cuthbert's Catholic Primary School have movement joints in their walls and floors that are easy to overlook.
Egham Wick is about 2 miles west of Egham, in Surrey. Commercial clients in Egham Wick use us for work on movement joints. 379 places across Surrey fall within our area, Egham Wick among them. There’s a separate page for Reading, about 17 miles away.
We cover the TW20 postcode districts for movement joints. If your site is on Wick Lane and Wick Road or close by, we can quote for movement joints. Just outside Egham Wick, we also work in Englefield Green (1 mile north-east), Bishopsgate (1 mile north), Wentworth (2 miles south), Stroude (2 miles south-east) and Virginia Water (2 miles south-east). Nearby towns on our patch include Guildford (12 miles south), Woking (7 miles south), Camberley (9 miles south-west), Epsom (15 miles south-east), Ewell (15 miles east) and Walton-on-Thames (8 miles east).
Local landmarks in Egham Wick
Around Egham Wick, our work takes us to commercial buildings near Riverside Walk and The Barley Mow Public House. For rail, the closest station is Virginia Water station, about 1.8 miles south-east of the centre. Well-known places in the area include Spelthorne Museum (3.2 miles east) and Windsor Castle (4.3 miles north). Not far away are Gracious Pond and St Ann's Hill.