Facade and window perimeter sealing in Burley, Hampshire
We carry out facade joint and window perimeter sealing on commercial buildings in Burley. Send photographs or drawings for a fixed quote.
- Perimeter sealant that has split or peeled away
- Previous reseals run over old sealant
- Failed seals around shopfront and entrance frames
Facade sealing in Burley
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing in Burley: the local picture
Burley is in the South East, one of the UK’s drier regions. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so we time external mastic for dry faces and agree it with the site team. A 2-mile radius around Burley takes in a number of hotels. Hotel extensions and refits normally have to fit around bookings, so mastic dates are tight.
Hotels like Burley Manor Hotel, under half a mile to the north of Burley, rarely close for long, so refurbishment mastic is phased floor by floor. When a school such as Burley Primary School is extended or refurbished, the mastic package is often squeezed into the holidays.
Burley is in Hampshire. We cover Burley and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. Burley is one of 723 places in Hampshire on our list. Our Southampton page has more on work in that area (15 miles or so).
Commercial sites across BH24 are covered for facade joints. We cover commercial and managed buildings on The Mall, The Cross and Doveys Close. Just outside Burley, we also work in Burley Street (1 mile north-west), Bagnum (2 miles west), Foulford (2 miles north-west), Crow (3 miles west) and Forest Corner (3 miles north-west). Further afield, our area takes in Totton (11 miles north-east), Lymington (8 miles south-east), Romsey (15 miles north-east), Hythe (13 miles east), New Milton (5 miles south) and Ringwood (4 miles west).
What’s near Burley
Around Burley, our work takes us to commercial buildings near The Burley Inn, among other places. The closest station to Burley is Sway station, roughly 5 miles south-east. Open spaces near Burley include Blashford Lakes and Linbrook Lake.
Facade sealing in Burley
Facade joints are the line of defence between the weather and the building fabric. Once a perimeter seal fails, water tracks in around frames and panels. We remove failed sealant and install a new bead chosen for the joint and how far it moves. If you are dealing with old perimeter mastic that has dried out and damp patches beside frames after rain, we can put it right. Most enquiries from Burley start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
For a site near Burley, the mastic visit is planned so the right sealants, primers and backing rod are on hand, timed to the stage the job has reached. Send drawings or photographs and the programme and we’ll quote to suit.
What our 12-month guarantee covers is the way we did the job: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Burley (BH24)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Also near Burley
Also in Burley
How the job changes by surface
Brick and stone facades
Stone can absorb plasticisers from the wrong sealant. We use a product suitable for the stone where the specification names one, and mask the edges carefully.
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus, neutral-cure product suits most frame-to-wall joints, tooled to shed water.
Questions we are asked in Burley
Is Burley too small for you to travel to?
Not at all. Burley is within our area. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you work to our programme on a site in or near Burley?
Yes, we work to the programme and the sequence the site sets. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Can you work on upper floors?
That varies with the building and the access on offer. Share what access exists or is planned when you send details, and we will agree the approach together.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
Will you quote for a small job?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
How do we ask for a quote?
You can use the quote form on this site; alternatively, speak to us on 01277 525 020 or email the details over. Include photos or drawings if you have them.
What sets the cost
Your fixed quote is built from the real scope. It takes account of:
- Site requirements such as inductions and permits
- Which sealant the job calls for
- Access and working height
- Backing rod, priming and other preparation
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What we need to price the job
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Photos of the joints, close up and from further back
- How the joints are reached, and at what height
- The site address and postcode
- Rough lengths or quantities, or drawings if you have them
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to give us a call on 01277 525 020 or email a schedule or drawings.
What we’re called out for in Burley
Overlaying old sealant is a common shortcut that fails quickly. Cured silicone won’t accept a new silicone bead, so the new bead peels away within a season or two.
Most enquiries start with one or more of the following:
- Unsightly perimeter sealant on a visible elevation
- Perimeter joints where frames meet the structure
- Hard, chalky sealant that no longer flexes
- Perimeter sealant that has split or peeled away
With historic properties like Avon Tyrrell House, 2.3 miles to the south-west of Burley, in the area, refurbishment work often meets old masonry that needs compatible sealants.
Before you book anyone
- Whether their applicators hold CSCS cards
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Which product they’ll use, and why it suits the joint
- Whether primer will be used where the manufacturer specifies it
From enquiry to sign-off
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. For a building around Burley, tell us how to find it and who will meet us. Send that with the details and we will confirm the plan with the quote.
- First we review photographs, drawings or what we saw on a visit, and agree how each joint will be reached.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- The new sealant goes in and is tooled firmly onto both faces.
- The completed runs are checked with you, then the 12-month guarantee applies.
Before we start on site
- For older buildings, check the asbestos register before work
- Tell staff and tenants when we will be in
- Send your site hours and access windows
Request a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or email the details over.
Read more
Leave it or put it right?
Scaffold or access already on site makes resealing much simpler. Coordinating facade sealing with other external works avoids paying for access twice, which is often the biggest saving. For buildings around smaller places like Burley, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- A range of standard colours, depending on the product
- One number for every site we cover
- CHAS accredited
- Workmanship guaranteed for 12 months
Read how commercial sealant jobs are priced and our accreditations and insurance.
Building owners, agents and FMs in Burley
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Burley can sit alongside others in a wider programme.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.