Shobley facade sealing
Facade joint and window perimeter sealing on commercial buildings across Shobley, carried out by CSCS-carded applicators. CHAS accredited and fully insured.
- Previous reseals run over old sealant
- Perimeter sealant that has split or peeled away
- Staining on stone next to old sealant
Facade sealing in Shobley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle facade sealing in Shobley
External joints face UV, rain, temperature swings and building movement all year. How long a joint lasts depends on the movement it takes, its exposure, the product and how well it was installed. When it fails, the whole bead is cut away and the joint rebuilt. We work on perimeter joints where frames meet the structure, stone and brick facade joints and shopfront frames, and the usual reasons a site gets in touch are discoloured or dirty facade joints and hard, chalky sealant that no longer flexes. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Shobley, preparation and product choice get the time they need.
Sites around smaller places like Shobley can be a fair drive from suppliers, so we come with everything the package needs. Send drawings or photographs and the programme and we will quote to suit.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Shobley (BH24)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Building and refurbishing in Shobley
Shobley is in the South East, one of the UK’s drier regions. Winter mornings still bring frost and condensation on frames and panels, so external mastic is timed for workable conditions and agreed with the site manager.
Hospital estates such as St Leonard's Hospital (to the south-west of Shobley) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan. When a school such as Poulner Infant School is extended or refurbished, the mastic package is often squeezed into the holidays.
Shobley is about 2 miles north-east of Ringwood, in Hampshire. We send applicators to Shobley for facade joints. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. For work in that direction, see our Southampton page.
Work on facade joints is covered throughout BH24, whatever the building. If your building is just outside Shobley, we cover Forest Corner (1 mile south-west), Hangersley (1 mile west), Foulford (1 mile south), Highwood (1 mile north-west) and Poulner (1 mile west). Bigger towns within reach include Totton (11 miles east), Lymington (11 miles south-east), Romsey (15 miles north-east), Hythe (15 miles east), New Milton (8 miles south-east) and Barton on Sea (9 miles south-east).
Landmarks near Shobley
Locally, jobs take us to sites close to Ringwood School Academy and the streets around them. Well-known places in the area include St Leonard's Hospital (5.7 miles south-west). For a walk, there’s Linbrook Lake and Blashford Lakes.
Signs you need facade sealing in Shobley
When the sealant tears down its centre, it has normally been asked to move more than it can. Too thin a bead, too narrow a joint or a product with the wrong movement class are common reasons.
These are often picked up first by site or facilities staff:
- Staining on stone next to old sealant
- Failed seals around shopfront and entrance frames
- Sealant pulling away from frames or panels
- Leaks at window and door perimeters
Historic houses such as Avon Tyrrell House (3.9 miles south of Shobley) are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Before you book anyone
- Will RAMS and insurance details be available?
- Is the sealant right for the movement and the substrate?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How long is the guarantee, and what does it include?
Questions about Shobley
Is Shobley too far out for you?
Not at all. Shobley is within our area. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Can you take on a job at a hospital such as St Leonard's Hospital?
Yes, hospitals are one of the sectors we cover. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Do you provide access for facade work?
That varies with the building and the access on offer. Share what access exists or is planned when you send details.
Is it okay to overlay old mastic?
No. A bead run over old sealant soon lifts. We remove the failed sealant, clean the faces, set the depth and reseal.
How long do sealant joints last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
What about RAMS and site documents?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Can you handle several sites?
Yes. A group of buildings can go on one quote, with one point of contact.
Places near Shobley
Also in Shobley
What the job involves on each surface
Precast concrete panels
Joints between precast panels carry real movement. A sealant of the right movement class goes in over backing rod, primed where the maker specifies.
Coping and flashing joints
Sometimes the coping or flashing itself has failed. Where the issue isn’t the sealant, we say so.
When it isn’t the sealant
Some faults sit outside our scope, and we say so rather than covering them up:
- Arranging specialist high-level access, which is planned with the client
- Joints too narrow for the movement they take, which need redesign
- Installing or repairing glazing systems
If in doubt, call 01277 525 020 or send photos by email and we’ll say what we think.
Where we work in Shobley
- Stone and brick facade joints
- Window and door perimeters
- Coping and flashing joints
- Cladding panel joints
- Perimeter joints where frames meet the structure
- Shopfront frames
How a job runs
Site rules come first: signing in, inductions and any permit to work. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Rural sites near Shobley may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- We plan access and the order of elevations with the client.
- We only seal when joints are dry and within the product’s temperature range.
- Each joint is cut out and the edges inspected.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
What we need from you
- Confirm the product named in the specification
- Tell us which areas need to stay in use
- Arrange parking or a loading space
Request a quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email us if you’d rather talk the job through.
Advice
Why it’s worth doing now in Shobley
Leaving failed perimeter sealant also makes the eventual job bigger: wet edges break down, so repairs may be needed before resealing. Early action keeps it simple. Around Shobley, it’s better to renew all the failing joints at once. Send photos of each area and we’ll quote for the lot.
What a job costs comes down to how many linear metres there are, what has to come out first and how the joints are reached. Call for a quote once you have the details.
What you get with us
- Products installed to the manufacturer’s instructions
- Constructionline member for supplier checks
- Sealing commercial buildings since 2005
- CSCS-carded applicators
Take a look at our cost guide or how we’re accredited.
Looking after the joints
For the best life from the joints:
- Clear debris that holds water against joints
- Keep pressure washers away from fresh sealant
- Investigate damp beside windows promptly
- Insist on a full cut-out when joints are renewed
Blocked sills and gutters push water at the joints. Good drainage keeps water moving off the facade instead of soaking the joints.
Building facade joints into a maintenance cycle avoids emergency repairs. Regular checks let you renew joints before water gets in, rather than waiting for a ceiling stain.