
Brown Candover facade sealing
Facade sealing for Brown Candover, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Water coming in around window frames
- New sealant peeling off old mastic
- Hard, chalky sealant that no longer flexes
Facade sealing across Brown Candover
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Signs you need facade sealing in Brown Candover
When the sealant tears down its centre, it has typically been asked to move more than it can. The joint may be too narrow, the bead too thin or the sealant the wrong movement class.
It’s worth sending us details if you spot any of the following:
- Cladding panel joints that have opened up
- Air leaks through failed facade joints
- Staining on stone next to old sealant
- Perimeter sealant that has split or peeled away
Sites around Brown Candover get mastic sealed to the drawings and the programme, nothing improvised.
What to look for in a quote
- Whether their applicators hold CSCS cards
- What level of public liability insurance do they hold?
- Do they follow the manufacturer’s priming guidance?
- Whether old or failed sealant will be cut out, not overlaid
Facade sealing in Brown Candover
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. Once a perimeter seal fails, water tracks in around frames and panels. We remove failed sealant and install a new bead chosen for the joint and how far it moves. We work on perimeter joints where frames meet the structure, stone and brick facade joints and cladding panel joints, and what we’re called in for most is new sealant peeling off old mastic and leaks at window and door perimeters. Most enquiries from Brown Candover start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a site near Brown Candover, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photos and the programme and we will quote to suit.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.

- Where
- Brown Candover (SO24)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end, plus a 12-month guarantee.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
Our process
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and work section by section so the rest of the building stays in use. For work around Brown Candover, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We look at the joints, the drawings and the access before pricing.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- The new sealant goes in and is tooled firmly onto both faces.
- The completed runs are checked with you, then the 12-month guarantee applies.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- Let building users know which areas are affected
- Share the asbestos register for older buildings
Getting a fixed quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or email a schedule or drawings if you’d rather talk the job through.
Advice
Your questions answered
Can the mastic package for our job in Brown Candover follow the site programme?
Yes, we work to the programme and the sequence the site sets. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Is Brown Candover too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
How soon can the area be used again?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
What’s the quickest route to a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. Step one needs little more than photos and a postcode.
Will your applicators have CSCS cards?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.
What hours do you work?
Mention the site’s hours and access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Do you seal facades in winter?
Wet joints or temperatures outside the product’s range mean waiting. We plan for weather and keep you updated throughout the job.
Contractors’ notes for Brown Candover
Brown Candover is in the South East, one of the UK’s drier regions. Winter mornings still bring frost and condensation on frames and panels, so we time external mastic for dry faces and agree it with the site team. Brown Candover is about 53 miles from central London. Towns within reach of London tend to keep building, from flats to offices and schools, and each scheme needs its mastic sealed to programme.
A facade joint near Brown Candover lasts when width, depth and backing are right, not just the finish.
Brown Candover is about 9 miles south of Basingstoke, in Hampshire. Businesses, contractors and managing agents in Brown Candover use us for work on facade joints, as part of our coverage of Hampshire. Our Hampshire coverage takes in 723 places, large and small. For work in that direction, see our Southampton page.
We cover the SO24 postcode districts for facade joints. Buildings on Spybush Lane, Bryces Lane and Gravel Close are within our area. If your building is just outside Brown Candover, we cover Totford (1 mile south-west), Northington (1 mile south-west), Preston Candover (2 miles north-east), Upper Wield (3 miles east) and Old Alresford (3 miles south). Bigger towns within reach include Basingstoke (9 miles north), Winchester (9 miles south-west), Eastleigh (15 miles south-west), Andover (14 miles west), Chandler's Ford (15 miles south-west) and Alton (9 miles east).
Around Brown Candover
Around Brown Candover, our work takes us to commercial buildings near The Woolpack Inn and the streets around them. For rail, the closest station is Micheldever station, roughly 4.4 miles north-west of the centre. A little further out are Barton Castle (2.7 miles east).
Places near Brown Candover
Also in Brown Candover
When something else is needed
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Joints whose design needs changing by the specifier
- Work on the window or framing system itself
- Specialist high-level access methods
Not sure which it is? You can give us a call on 01277 525 020 or send details through our quote form and we will tell you honestly.
Surfaces we seal
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Cladding panel joints
- Shopfront frames
- Stone and brick facade joints
What sets the cost
These are the things that shape the price:
- Distance, for remote addresses
- The product specified
- Access and working height
- Phasing around occupants
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Sending details for a quote
Diagnosis starts before we arrive. Tell us:
- A wide shot and a close-up of the area
- Anything awkward about access or site hours
- The type of building and who uses it
- Asbestos survey details if the building is older
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price against exactly what is specified. For smaller jobs, photographs and a description will do.