Bentworth floor joint sealing
Floor joint sealing and filling in warehouses, factories and industrial units in Bentworth and across Hampshire. CHAS accredited and fully insured, with a 12-month guarantee.
- Open saw cuts full of debris
- Failing joints at loading bays and dock doors
- Soft sealant dragged out of trafficked joints
Floor joint sealing in Bentworth
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What we’re called out for in Bentworth
Unfilled joints soon pack with grit, shrink-wrap scraps and pallet splinters. That debris is hard and levers at the edges as wheels pass, speeding up the damage.
These are often picked up first by site or facilities staff:
- Sealant pulled out along a truck route
- Filler that has parted from one face
- Saw-cut joints left open and packed with grit
- Old filler gone hard, cracked or loose
Estates like Barton Industrial Estate, 2.8 miles to the south-west of Bentworth, combine warehouse slabs, yards and loading bays, all with joints under wheels.
Comparing quotes
- Do they follow the manufacturer’s priming guidance?
- Who will actually carry out the work
- Health and safety accreditation such as CHAS
- Whether old or failed sealant will be cut out, not overlaid
How we handle floor joint sealing in Bentworth
Sometimes the concrete either side of a joint has already spalled. Filling against a crumbled arris won’t hold for long, so we will tell you if the joint edges need repairing first and leave that decision with you. If you’re dealing with chipped and spalling edges along forklift routes and old filler gone hard, cracked or loose, we can put it right, whatever the surface. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Bentworth, preparation and product choice get the time they need.
Smaller community and commercial buildings around Bentworth have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Where
- Bentworth (GU34)
- Wider area
- Hampshire
- Cover
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Work for main contractors and building owners
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
More services for Bentworth
How the job changes by surface
Retail and showroom floors
Shop and showroom floors often have exposed slab joints, especially with polished or coated concrete. A flush, neat fill in a suitable colour keeps the floor looking right, and we will confirm the colours available for the specified product.
Loading bays and dock areas
Joints at dock doors need a product that copes with the traffic and the conditions. Curing times also have to fit around deliveries.
What affects the price in Bentworth
These are the things that shape the price:
- Quantities, in metres or numbers
- Backing rod, priming and other preparation
- Working within restricted access windows
- Site requirements such as inductions and permits
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
What we need to price the job
There’s no need for a formal survey. These details are enough to start:
- When you need the work done
- Anything awkward about access or site hours
- What the building is and how it’s used
- A wide shot and a close-up of the area
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or email the details over.
Slabs, ramps and loading bays in Bentworth
Bentworth sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in. At about 47 miles from central London, Bentworth is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.
For a school such as St Mary's Bentworth Church of England Primary School, playground and building joints can be done in the holidays. A healthcare site such as Alton Community Hospital, 2.8 miles south-east of Bentworth, depends on car parks, ramps and service yards whose joints take traffic all day.
Bentworth is about 3 miles west of Alton, in Hampshire. If you are looking for floor joint sealing in Bentworth, we can help. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Reading is covered too, some 20 miles away.
If you need floor joint sealing in GU34, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. Streets here include Village Street, Church Street and Drury Lane, and sites on any of them can send details for a fixed quote. If your building is just outside Bentworth, we cover Holt End (1 mile south-west), Thedden (1 mile south-east), Wivelrod (1 mile south-east), New Copse (1 mile south-west) and Beech (2 miles south-east). Nearby towns on our patch include Basingstoke (8 miles north), Winchester (13 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles north-east) and Alton (3 miles east).
Near you in Bentworth
Locally, jobs take us to sites close to The Star Inn and the streets around them. The nearest railway station is Alton station, roughly 3.5 miles east of the centre. Nearby you’ll also find Barton Castle (3.2 miles south-west) and Gliding Heritage Centre (2.2 miles north-east). The countryside around Bentworth includes King's Hill.
Site staff or a sealant specialist?
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Smaller jobs around Bentworth can be grouped with others nearby. You will have a fixed quote before work starts.
- A floor survey records every joint, its edges and what crosses it.
- The treatment and the zones are set out in a fixed quote.
- Each joint is cut or routed back to clean, sound concrete.
- Dust is vacuumed out and primer applied where specified.
- Filler or sealant is placed to depth and finished flush.
- Zones reopen once cured and the work moves on.
Preparing the site
- Send your site hours and access windows
- Move anything stored against the joints
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call 01277 525 020 or use the quote form.
Read more
Questions about Bentworth
Can you take on a job at a hospital such as Alton Community Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Does your area include sites such as Barton Industrial Estate, near Bentworth?
Yes. We cover Bentworth and the area around it, including industrial estates, business parks and retail parks such as Barton Industrial Estate. A few photographs and the unit address let us price the work.
How long will the new sealant last?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
How long before trucks can use the joints?
Cure times vary with the product and how cold the slab is. You’ll get a reopening time for each area before we start.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, let us know and we will send them with the quote.