Expansion Joint Sealing in West Lavington
Need expansion joint sealing in West Lavington? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Movement joints with split or torn sealant
- Joints packed with grit and debris
- New sealant over old, now failing
Expansion joint sealing near West Lavington
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Surface by surface
Joints between different materials
Different materials meeting at a joint rarely move in step. We choose a sealant that grips both faces priming where the maker calls for it.
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.
How we handle expansion joint sealing in West Lavington
The seal is what lets a movement joint do its job. When the sealant splits or lets go, the gap fills with dirt and water. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. We work on brickwork movement joints, blockwork control joints and car park decks and ramps, and the usual reasons a site gets in touch are debris jammed in movement joints and car park joints leaking onto vehicles below. Searching for sealant specialists in West Lavington? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
In and around smaller places like West Lavington, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- West Lavington (GU29)
- Region
- West Sussex
- Cover
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to West Lavington
More services for West Lavington
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Joints that move: notes for West Lavington
The 3 miles around West Lavington take in two named trading estates, business parks or retail parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. West Lavington is in the South East, one of the UK’s drier regions. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open.
Schools like Midhurst CofE Primary School often have long brick elevations with movement joints that age quietly. Hospital campuses such as Midhurst Community Hospital, 1 mile north of West Lavington, grow in stages, leaving movement joints wherever new blocks meet old. If you manage units on an estate such as Holmbush Industrial Estate, 0.8 miles to the west of West Lavington, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch.
West Lavington is about 9 miles east of Petersfield, in West Sussex. Our applicators travel to West Lavington for work on movement joints, handled exactly as we handle every other area. 373 places across West Sussex fall within our area, West Lavington among them. Portsmouth is covered too, some 19 miles away.
Business premises anywhere in GU29 are within our area for movement joints. Streets here include Church Road, Selham Road and Highstanding Lane, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Midhurst (1 mile west), Cocking Causeway (1 mile south-west), Easebourne (1 mile north), Bepton Common (1 mile west) and Heyshott Green (1 mile south). Nearby towns on our patch include Bognor Regis (13 miles south), Chichester (10 miles south), Littlehampton (14 miles south-east), Rustington (15 miles south-east), Storrington (13 miles east) and Billingshurst (12 miles east).
Landmarks near West Lavington
Locally, jobs take us to sites close to Midhurst Rother College, St Margaret's Convent and Crown House. Other landmarks nearby include Midhurst Museum (0.6 miles north-west) and Lodsworth Castle (2.5 miles east). Green spaces nearby include Levin Down and Graffham Common.
Quoting for work in West Lavington
Quotes vary with the job. Expect it to depend on:
- Which sealant the job calls for
- Distance, for remote addresses
- Quantities, in metres or numbers
- Removal of failed or old sealant
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What we need to price the job
The more we know, the firmer the quote. Helpful details to send:
- Your programme or deadline
- A wide shot and a close-up of the area
- What the building is and how it’s used
- Specification clauses that apply
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or email the details over.
Your questions answered
Does your area include sites such as Holmbush Industrial Estate, near West Lavington?
Yes. Estates, retail parks and business parks around West Lavington, Holmbush Industrial Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Is a smaller place like West Lavington outside your area?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, tell us and we will confirm them with the quote.
Why do our movement joints keep failing?
Usually the joint is moving more than the sealant can take. That’s why we check width, depth and movement class before quoting, rather than replacing like for like.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. We don’t remove asbestos-containing materials.
Can the sealant be colour-matched?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We’ll confirm the colours available for the specified product.
What we can’t put right
Being straight saves everyone time. Fresh joints won’t solve:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Joints too narrow for the movement, which need redesigning by the engineer
- Concrete or masonry repairs along the arrises
Not sure which it is? You can speak to us on 01277 525 020 or use the quote form and we will tell you honestly.
Surfaces we seal
- Brickwork movement joints
- Car park decks and ramps
- Podiums and floor movement joints
- Precast concrete panel joints
- Cladding panel joints
- Blockwork control joints
Maintenance after handover
Once the work is signed off, these steps help:
- Put movement joints on the planned maintenance inspection round
- Record the sealant used and the date in the O&M file
- Clear dirt from joint lines during routine cleaning
- Leave barriers in place until fresh joint sealant has cured
Fresh joint sealant needs its full cure time before it takes traffic or water. How long that takes depends on the product, the temperature and the depth of the joint. Barriers left in place until then protect the finish.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers, and the damage spreads along the joint. Sealing early protects the edges.
On site: what to expect
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access, and we clear our waste as we work. For work around West Lavington, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Getting the site ready
- Tell staff and tenants when we’ll be in
- Share your working hours and any access restrictions
- Send any specification or drawings in advance
Ask for a quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.