Expansion Joint Sealing in Wells-in-the-Field
Work needed on a movement joint in Wells-in-the-Field? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Expansion joints split through the centre of the bead
- Hardened, cracked sealant on exposed facades
- Chipped joint edges on forklift routes
Expansion joint sealing for Wells-in-the-Field sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
On site: what to expect
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. For work around Wells-in-the-Field, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Getting the site ready
- Point out any areas we must not close
- Tell us what induction or permit system the site runs
- Clear stock, furniture or equipment away from the joints
Getting a fixed quote
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or ring 01277 525 020 or use the quote form to discuss it first.
Related advice
Expansion joint sealing for commercial buildings in Wells-in-the-Field
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability, and depth is controlled using closed-cell backing rod, or bond-breaker tape in shallow joints. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises, and the bead is tooled so it grips the two faces alone. Most enquiries involve movement joints with split or torn sealant and arrises breaking up along floor joints, across brickwork movement joints, podiums and floor movement joints and car park decks and ramps. A single leaking joint is often how a building in Wells-in-the-Field first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Jobs around smaller places like Wells-in-the-Field are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee covers our workmanship: preparation, application and finish. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Wells-in-the-Field (RG28)
- Region
- Hampshire
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Where floor joints take the most wear near Wells-in-the-Field
Wells-in-the-Field is about 56 miles from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Wells-in-the-Field is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, while winter salting gets into any joint left open.
For an occupier at a site such as Ardglen Industrial Estate, 1.2 miles west of Wells-in-the-Field, the joints at loading doors and dock levellers typically see the hardest wear. In a school such as Whitchurch Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Wells-in-the-Field is about 7 miles east of Andover, in Hampshire. Looking for expansion joint sealing in Wells-in-the-Field? We can help. Wells-in-the-Field is one of 723 places in Hampshire on our list. Our Reading page has more on work in that area.
Work on movement joints is covered throughout RG28. Buildings on Priory Lane and London Road are within our area for movement joints. Close to Wells-in-the-Field, our area also takes in Freefolk (1 mile east), Whitchurch (1 mile west), Cole Henley (2 miles north), Firgo (2 miles south-west) and Hurstbourne Priors (3 miles south-west). Bigger towns within reach include Basingstoke (9 miles east), Winchester (12 miles south), Andover (7 miles west), Tadley (11 miles north-east), Hyde (11 miles south) and Popley (11 miles east).
Landmarks near Wells-in-the-Field
We work on buildings around Testbourne Community School and Railway Hotel and the streets around them. Wells-in-the-Field’s nearest station is Whitchurch (Hampshire) station, roughly 1.1 miles west.
When something else is needed
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Waterproofing layers buried beneath the sealant
- Movement on a scale no sealant is meant to absorb
- Proprietary pre-formed expansion joint systems
If you are not sure, just phone 01277 525 020 or email a schedule or drawings and we will give you a straight answer before you book.
Joints and surfaces we work on
- Blockwork control joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Cladding panel joints
- Podiums and floor movement joints
Surface by surface
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. A semi-rigid filler is common in trafficked industrial floors.
Joints between different materials
Some mixed-material joints suit a hybrid sealant. The choice depends on the substrates and how much the joint moves.
Towns and villages near Wells-in-the-Field
What else we do in Wells-in-the-Field
Your questions answered
Can you work at a site such as Ardglen Industrial Estate, by Wells-in-the-Field?
Yes. We cover Wells-in-the-Field and the area around it, including industrial estates, business parks and retail parks such as Ardglen Industrial Estate. A few photos and the unit address let us price the work.
Does a site in Wells-in-the-Field have to shut while its joints are sealed?
Typically not: we work in sections and hand each one back once it has cured. The phasing plan comes with the quote.
How long will the new sealant last?
Nobody can honestly give a figure in years, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you quote from photographs?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
What causes movement joint sealant to fail?
Adhesion failure, cohesive failure, edge breakdown and UV ageing account for most cases. We diagnose which one it is before resealing, because the fix differs.
Leave it or put it right?
Closing a car park for a reseal is rarely an option. Work can be planned so parts of the deck stay open. Tell us what has to stay open and we’ll plan around it. Converted and older buildings near places like Wells-in-the-Field tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why clients in Wells-in-the-Field choose us
- Health and safety: CHAS accredited
- Coloured sealants to suit the setting, where available
- Clear, fixed quotes
- Constructionline member
Take a look at what affects the cost and our accreditations.
Maintenance after handover
To get the most from the new sealant:
- Leave barriers in place until fresh joint sealant has cured
- Note which joints were done, when, and with what
- Plan racking layouts so feet don’t land on a joint
- Include every elevation and deck joint in periodic inspections
Add every elevation, deck and floor joint to your inspection round. A periodic look picks up tears and lifting before water gets in. If anything looks wrong, give us a call on 01277 525 020 or email a schedule or drawings with photographs.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors, well after the seal first opened. Resealing promptly prevents internal damage.
What affects the price in Wells-in-the-Field
The price varies from site to site. It mainly depends on:
- The product specified
- Access and working height
- Whether the work must be split into stages
- Quantities, in metres or numbers
Pricing movement joints depends on quantities, condition and access. Ask us for a fixed quote.
Before you send an enquiry
Diagnosis starts before we arrive. Let us know:
- The postcode of the building
- Drawings or a marked-up plan, if available
- Access details, including height
- What the building is and how it’s used
For a fixed quote, call 01277 525 020 or email drawings and photos. You can also send details through our quote form.