Expansion joint sealing in Well Head
Expansion and movement joint sealing in walls, decks and floors in Well Head and across Kent. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Previous reseals laid over old sealant
- Water getting into the wall through a failed joint
- Water dripping through deck or ramp joints
Expansion joint sealing near Well Head
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Looking after the joints
Problems stay small when the joints are checked regularly. In particular:
- Avoid parking heavy plant or pallets on joint lines
- Reopen bays and walkways only after the stated cure time
- Include every elevation and deck joint in periodic inspections
- Record the sealant used and the date in the O&M file
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint, and we confirm it for each area before we leave. Keeping the area coned off until then avoids tyre marks and damage.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint. Resealing promptly prevents internal damage.
How we handle expansion joint sealing in Well Head
Buildings and slabs are never completely still: temperature, moisture, shrinkage and loading all make materials grow and shrink. Movement joints are where that movement is absorbed and the seal across each one keeps out water and grit. Mastic Doctor reseals movement joints in brickwork, blockwork, concrete, cladding and floors for buildings in Well Head. If you have brittle, chalky sealant on external joints and expansion joints filled with dirt and stones, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: in Well Head, that means joint design, primers and backing rod as standard.
Jobs around smaller places like Well Head are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we’ll take it from there.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Well Head (CT3)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Joints that move: notes for Well Head
Well Head is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. Central London is about 59 miles from Well Head. The roads out of London are lined with trade parks and distribution sheds.
Schools like Wingham Primary School often have long brick elevations with movement joints that age quietly. Hospital campuses such as St Martins Hospital (5 miles west of Well Head) grow in stages, leaving movement joints wherever new blocks meet old.
Well Head is about 6 miles east of Canterbury, in Kent. Looking for expansion joint sealing in Well Head? We can help, as we do across Kent. Well Head is one of 931 places in Kent on our list. Sites around London have their own page, roughly 59 miles from Well Head.
Business premises anywhere in CT3 are within our area for movement joints. Close to Well Head, our area also takes in Wingham (1 mile north-west), Twitham (1 mile east), Wingham Well (1 mile west), Broomhill (1 mile north) and Wingham Green (1 mile west). A short drive away, we cover Canterbury (6 miles west), Margate (11 miles north-east), Dover (9 miles south), Folkestone (13 miles south), Ramsgate (10 miles north-east) and Broadstairs (11 miles north-east).
Around Well Head
Locally, jobs take us to sites close to The Red Lion pub, among other places. The nearest railway station is Adisham station, roughly 2 miles south-west. Other landmarks nearby include St Martins Hospital (5 miles west). Green spaces nearby include Monk's Wall nature reserve.
What we are called out for in Well Head
When a bead pulls away from one face, it has lost adhesion. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes and it often shows on rushed work.
Things that typically lead to an enquiry:
- Hardened, cracked sealant on exposed facades
- Sealant peeling off one face of the joint
- Water dripping through deck or ramp joints
- Water getting into the wall through a failed joint
On industrial estates such as Wingham Industrial Estate, which lies north-west of Well Head, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Before you book anyone
- What level of public liability insurance do they hold?
- Their plan for phasing and protecting the area
- Whether old or failed sealant will be cut out, not overlaid
- How they handle RAMS and site documents
Work for main contractors and building owners
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules, with CSCS-carded applicators on site.
Nearby places to Well Head
More services for Well Head
Why act early in Well Head
Resealing is typically the answer, not replacing the element. If the material either side is sound, a properly prepared reseal restores the joint. We will flag where edges need repair before sealing. For buildings around smaller places like Well Head, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The price depends on how many linear metres there are, what has to come out first and the access. Call for a fixed quote once you have the details.
Why us?
- CHAS accredited
- 12 months’ guarantee on every job
- Products installed to the manufacturer’s instructions
- Public liability insurance in place
Common questions from Well Head clients
Is Well Head off your patch?
No. Places such as Well Head are covered as much as the big towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you work on a hospital site such as St Martins Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Why do our movement joints keep failing?
Most often the movement is too much for the product or the joint width. We review the joint design as well as the sealant before pricing so the same failure isn’t repeated.
Can staff carry on working while you’re here?
Yes, as long as we plan it. Tell us your site hours and access windows and we will plan around them.
Do you use silicone or polyurethane in movement joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and sign any area that should be left alone.
What site paperwork can you supply?
Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.
What the job involves on each surface
Car park decks and ramps
Failed deck joints often show as leaks on the level below. We strip the old seal, prepare the edges and seal again, and we’ll tell you if any edges need repairing first.
Podium joints
Podiums take foot traffic, planters and weather. A sealant suited to both traffic and exposure is used.
Our process
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases, and we clear our waste as we work. For work around Well Head, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We assess the joints on site or from photos, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Point out parking and an unloading spot
- Move anything stored against the joints
- Have the specification and drawings to hand
Quotes
For a fixed quote, call 01277 525 020 or email drawings and photos. Our quote form is another easy route.