Expansion Joint Sealing in Shatterling
Work needed on a movement joint in Shatterling? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Previous reseals laid over old sealant
- Movement joints with split or torn sealant
- Weathered movement joint sealant that no longer flexes
Expansion joint sealing across Shatterling
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Why act early in Shatterling
A like-for-like reseal of a joint that keeps splitting rarely lasts. A higher movement class, or a design change by the engineer, may be needed. Halls, stores and units around places like Shatterling may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
A quote for movement joints depends on quantities, condition and access, plus any specification you’re working to. Call for a quote.
Why clients in Shatterling choose us
- Constructionline member
- Fixed quotes based on photographs, drawings or a visit
- 12-month guarantee on workmanship
- CSCS-carded applicators
See our cost guide and our accreditations.
Expansion joint sealing for commercial buildings in Shatterling
A movement joint only works while its seal does. Once it fails, water, grit and debris get in. Dealt with early, it stays a sealant job rather than a concrete or masonry repair. The enquiries we see most involve joints packed with grit and debris and sealant peeling off one face of the joint, on brickwork movement joints, cladding panel joints and precast concrete panel joints. For commercial sealant work in Shatterling, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Smaller community and commercial buildings around Shatterling have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.
Whoever the client is, the cover is the same: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Location
- Shatterling (CT3)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Expansion joint sealing around Shatterling: how the place shapes the job
The 3 miles around Shatterling take in two named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Shatterling lies roughly 59 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital.
Schools such as Wingham Primary School have movement joints in their walls and floors that are easy to overlook. Sites like St Martins Hospital (5.4 miles west of Shatterling) carry ambulances, deliveries and visitors’ cars over their road and deck joints. For an occupier at a site such as Wingham Industrial Estate, 0.9 miles south-west of Shatterling, the joints at loading doors and dock levellers normally see the hardest wear.
Shatterling is about 6 miles east of Canterbury, in Kent. Looking for expansion joint sealing in Shatterling? We can help, as we do across Kent. We work across 931 places in Kent, from busy centres to rural villages. For work in that direction, see our London page (59 miles or so).
We take on movement joints across the CT3 postcode area. Close to Shatterling, our area also takes in Broomhill (1 mile west), Perry (1 mile north), Nash (1 mile north-east), Wingham (1 mile south-west) and Twitham (1 mile south). Bigger towns within reach include Canterbury (6 miles west), Margate (10 miles north-east), Dover (10 miles south), Folkestone (14 miles south), Ramsgate (9 miles north-east) and Broadstairs (10 miles north-east).
Local landmarks in Shatterling
In Shatterling, that means premises near The Red Lion pub. Shatterling’s nearest station is Adisham station, roughly 3 miles south-west of the centre. A little further out are St Martins Hospital (5.4 miles west). The countryside around Shatterling includes Monk's Wall nature reserve.
Other services in Shatterling
What the job involves on each surface
Brickwork and blockwork joints
Brick and block edges need careful preparation. We clean them back to sound material and prime where the manufacturer specifies.
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. The sealant needs the right movement capability and a controlled depth.
Questions about Shatterling
Do you take on work at healthcare sites like St Martins Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is a smaller place like Shatterling outside your area?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you quote from photos?
It depends on the job. Straightforward work can often be priced from photographs and measurements, while larger or less clear jobs get a site visit first.
How much does the work cost?
We don’t publish prices, as every site differs. With photographs or drawings, we can give you a fixed quote.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards.
Can you work while the building is occupied?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
Cost factors for movement joints
The price varies from site to site. Expect it to depend on:
- How accessible the joints are
- Specialist products, such as fire-rated or hygienic sealants
- Whether old sealant has to be cut out first
- Working within restricted access windows
What a job costs comes down to the quantity of joints, what has to come out first and how the joints are reached. Call for a fixed quote once you have the details.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- The postcode of the building
- Approximate linear metres or a joint schedule
- Asbestos survey details if the building is older
- The type of building and who uses it
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, ring 01277 525 020 or email the details over.
From enquiry to sign-off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For a building around Shatterling, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Preparing the site
- Have the specification and drawings to hand
- Make sure the joints can be reached
- Point out any areas we must not close
Request a quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to phone 01277 525 020 or email the details over with what you know.
Read more
What sealant work can’t fix
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Concrete or masonry repairs along the arrises
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- A joint that has to be widened or re-detailed before it can work
If in doubt, speak to us on 01277 525 020 or send photos by email and we will say what we think.
Where we work in Shatterling
- Brickwork movement joints
- Podiums and floor movement joints
- Blockwork control joints
- Cladding panel joints
- Precast concrete panel joints
- Car park decks and ramps
Maintenance after handover
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- Keep racking legs and heavy point loads off floor joints
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Keep traffic off new joints until the cure time is up
- Record the sealant used and the date in the O&M file
Debris does more harm to joint sealant than most people realise. Stones pressed into the bead by wheels or feet can puncture it and decks and floors suffer most. A routine sweep is the simplest protection.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors. Resealing promptly prevents internal damage.