Tovil expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors in Tovil. CHAS accredited and fully insured, with a 12-month guarantee.
- Arrises breaking up along floor joints
- Rain penetration at brick or block movement joints
- Leaks through car park deck joints onto the level below
Need expansion joint sealing in Tovil?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle expansion joint sealing in Tovil
Brickwork and blockwork walls have vertical movement joints at intervals that most people only notice when the sealant has gone. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied. The enquiries we see most involve expansion joints split through the centre of the bead and sealant pulling off the joint face, across blockwork control joints, podiums and floor movement joints and precast concrete panel joints. A specialist sealant contractor works differently from a general builder: on jobs in Tovil, preparation and product choice get the time they need.
Rural business units around smaller places such as Tovil often have new slabs laid inside older buildings. Joints in those slabs need a product suited to whatever runs over them, from pallet trucks to foot traffic.
A 12-month guarantee applies to all our work in Kent. If an installation problem shows up, call 01277 525 020 or email drawings and photos and we’ll arrange a return visit.
- Place
- Tovil (ME16, ME15)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Where floor joints take the most wear near Tovil
Central London is about 31 miles from Tovil. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day. Tovil has at least three named business or industrial parks inside a 3-mile radius. Sites like these are full of saw-cut floor joints, yard slabs and car park joints.
For buildings at a park such as Tovil Green Business Park, which lies south of Tovil, brick and panel movement joints are easy to forget until one leaks. Sites like The Somerfield Hospital (to the north of Tovil) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Tovil is about 1 mile west of Maidstone, in Kent. Commercial clients in Tovil use us for work on movement joints. 931 places across Kent fall within our area, Tovil among them. For work in that direction, see our London page.
Work on movement joints is covered throughout ME16 and ME15. Streets here include Tovil Road, Wharf Road and Bower Lane, and sites on any of them can send details for a fixed quote. Just outside Tovil, we also work in Maidstone (1 mile east), Foley Park (2 miles north-east), Penenden Heath (2 miles north-east), Shepway (2 miles south-east) and Ringlestone (2 miles north). Further afield, our area takes in Sittingbourne (11 miles north-east), Sevenoaks (14 miles west), Royal Tunbridge Wells (14 miles south-west), Gravesend (13 miles north-west), Tonbridge (11 miles south-west) and Northfleet (14 miles north-west).
Around Tovil
Locally, jobs take us to sites close to River Len LNR, St Augustine Academy and Oakwood Park Grammar School and the streets around them. The closest station to Tovil is Maidstone West station, about 0.5 miles north-east. Other landmarks nearby include Kent Fire Brigade Museum (under half a mile south-east) and Allington Castle (2 miles north). Green spaces nearby include Boxley Hills and Burham Down.
Aftercare for building managers
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. We suggest:
- Keep stones and debris out of open joint lines
- Check joints after long freezing spells
- Avoid parking heavy plant or pallets on joint lines
- Include every elevation and deck joint in periodic inspections
In warehouses, forklift and pallet-truck routes take the most wear. Avoid standing heavy loads or racking legs on the joints, and report any chipped edges early.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster and the broken length grows with every pass. Keeping the filler or sealant sound protects the floor.
Doing it in-house
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
How a job runs
Working in a building that stays open takes some planning. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. Work in places the size of Tovil is planned as a single visit where we can. Photos with rough sizes let us arrive with everything needed.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Each joint is inspected and handed over with our 12-month guarantee.
Before we start on site
- Agree which areas must stay open
- Tell us your opening times and when work is allowed
- Tell us what induction or permit system the site runs
Ask for a quote
For a fixed quote, ring 01277 525 020 or email drawings and photos. Our quote form is another easy route.
Read more
Nearby places to Tovil
Also in Tovil
Do you need expansion joint sealing in Tovil?
When the movement exceeds the sealant’s capability, the bead tears. Cohesive failure, a split through the centre, usually means the joint or product wasn’t right for the movement. Resealing like for like often fails the same way unless width and product are reviewed.
Typical triggers for a call:
- Weathered movement joint sealant that no longer flexes
- Spalled or broken joint edges in floors and decks
- Rain penetration at brick or block movement joints
- Expansion joints filled with dirt and stones
For estates staff at a university like University for the Creative Arts, 0.7 miles to the north-west of Tovil, building and paving joints are part of the planned maintenance list.
What to look for in a quote
- Their public liability cover
- Who will actually carry out the work
- How the existing material will be dealt with
- What site paperwork they can supply
When it isn’t the sealant
Being straight saves everyone time. New sealant won’t cure:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Waterproofing layers buried beneath the sealant
If you are not sure, just give us a call on 01277 525 020 or send details through our quote form and we will give you a straight answer.
What we seal
- Precast concrete panel joints
- Cladding panel joints
- Blockwork control joints
- Brickwork movement joints
- Car park decks and ramps
- Podiums and floor movement joints
Questions we’re asked in Tovil
Does your area include sites such as Tovil Green Business Park, near Tovil?
Yes, sites like Tovil Green Business Park are within our area, along with the rest of Tovil. Photos and a short description are enough for a first look.
Can you take on a job at a hospital such as The Somerfield Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Do you cover Tovil?
Yes. We cover Tovil, and you can call the office on 01277 525 020 or email a schedule or drawings to get started.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
What happens if old sealant might contain asbestos?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
How the job changes by surface
Brickwork and blockwork joints
A brick movement joint full of old mortar or debris can’t close. Everything is raked out before backing and sealant go in and flag any joint that seems undersized.
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. We match the product to the traffic and the movement.