Expansion joint sealing in Foley Park
Expansion joint sealing for Foley Park, from a contractor working since 2005. Fully insured and CHAS accredited.
- Spalled or broken joint edges in floors and decks
- Hardened, cracked sealant on exposed facades
- Sealant peeling off one face of the joint
Expansion joint sealing for businesses in Foley Park
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Foley Park, done properly
The seal is what lets a movement joint do its job. When the sealant splits or lets go, the gap fills with dirt and water, the joint can’t close properly and its edges begin to crumble. Resealing at the first signs of failure is far cheaper than repairing the material either side. If you are dealing with expansion joints filled with dirt and stones and car park joints leaking onto vehicles below, we can put it right. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Foley Park it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around places the size of Foley Park, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Their slabs and walls still need movement joints that work.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Foley Park (ME14, ME15, ME16)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Towns and villages near Foley Park
Also in Foley Park
Common questions from Foley Park clients
Can you work on a hospital site such as KIMS Hospital?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
Is Foley Park off your patch?
No. Places such as Foley Park are covered as much as the big towns. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
What guarantee do you give on joint sealing?
Our workmanship on movement joints carries a 12-month guarantee. The guarantee covers how we sealed, not damage caused afterwards.
Will your applicators have CSCS cards?
Yes. Our applicators hold CSCS cards, which many sites require.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
How long will the new sealant last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
What if the joint edges are damaged?
Sound edges are essential. If they’re damaged, we’ll say so before any sealing.
What the job involves on each surface
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. We prepare the faces thoroughly and prime where the maker calls for it and check the edges for soundness as we go.
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. A trafficable sealant suited to the movement goes in, phased so parts of the car park stay open.
Floors, slabs and movement joints in Foley Park
Rainfall across the South East, Foley Park included, is lower than in many parts of the UK. External joints still wait for dry conditions, while winter salting gets into any joint left open. Foley Park is about 31 miles from central London. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift.
Across sites such as Powerhub Business Centre, which lies south-west of Foley Park, floor and movement joints can be sealed in phases so units keep working. A campus such as University for the Creative Arts, 1.6 miles south-west of Foley Park, has long runs of movement joint in its buildings, decks and paving.
Foley Park is about 1 mile north of Maidstone, in Kent. We send applicators to Foley Park for movement joints, handled exactly as we handle every other area. We work across 931 places in Kent, large and small. London is covered too, some 31 miles away.
Commercial sites across ME14, ME15 and ME16 are covered for movement joints. Among the streets we cover are Well Road, Rock Road and Byron Road, and sites on any of them can send details for a fixed quote. Main routes into Foley Park include the A249, which helps when planning parking and deliveries for the job. Sites close to Foley Park are covered too, including Penenden Heath (1 mile north-east), Harbourland (1 mile north), Grove Green (1 mile east), Ringlestone (1 mile north-west) and Maidstone (1 mile south). Bigger towns within reach include Sittingbourne (10 miles north-east), Sevenoaks (15 miles west), Royal Tunbridge Wells (15 miles south-west), Gravesend (12 miles north-west), Tonbridge (12 miles south-west) and Northfleet (13 miles north-west).
Local landmarks in Foley Park
We work on buildings around Valley Park School, Vinters Valley Park and The Hollybush Public House, among other places. The nearest railway station is Maidstone East station, roughly 0.6 miles south-west of the centre. Other landmarks nearby include Queen's Own Royal West Kent Regiment Museum (0.6 miles south-west) and KIMS hospital (1.1 miles east). The countryside around Foley Park includes Burham Down and Boxley Hills.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
We work for building owners and managing agents on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
Diagnose, treat, sign off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, the joints are worked through in the order agreed with your site contact. What matters most for a job in Foley Park is a clear list of what needs doing, so send photographs of each area. You will then get a fixed price for the work.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Before we start on site
- Tell us your opening times and when work is allowed
- Point out any areas we must not close
- Share the asbestos register for older buildings
Ask for a quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, give us a call on 01277 525 020 or send photos by email.
Advice
Common problems we fix in Foley Park
Sometimes the sealant holds but the substrate breaks away. If the edge of the joint is friable, the bond fails with it, so we tell you if the edges need repairing first.
Look out for the following:
- Rain penetration at brick or block movement joints
- Hardened, cracked sealant on exposed facades
- Layers of sealant in a movement joint
- Joints where the bead has lost adhesion
For an estate such as KIMS Hospital, 1.1 miles east of Foley Park, the joints in ramps, decks and long building elevations all need attention over time.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- How joint depth will be controlled
- Can the work be phased to keep areas open?
- Health and safety accreditation such as CHAS
Cost factors for movement joints
Before we quote, we look at:
- Whether the work must be split into stages
- Quantities, in metres or numbers
- The size and state of each joint
- Travel to remote or island sites
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Specification clauses that apply
- Whether the building will be occupied during the work
- Rough lengths or quantities, or drawings if you have them
- Any dates the work must fit around
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or email drawings and photos to discuss it first.