Expansion and movement joint sealing in Tinkers Cross, Hampshire
Our CSCS-carded applicators take on expansion and movement joint sealing in walls, decks and floors in Tinkers Cross. Send photos or drawings for a fixed quote.
- Joints packed with grit and debris
- Layers of sealant in a movement joint
- Car park joints leaking onto vehicles below
Expansion joint sealing across Tinkers Cross
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Aftercare for building managers
A few simple habits keep the new joints working:
- Reopen bays and walkways only after the stated cure time
- Look over external and deck joints after a hard winter
- Avoid parking heavy plant or pallets on joint lines
- Brief car park operatives to protect joint lines during winter clearance
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines, and report any chipped edges early.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint by which time the joint has been open for a while. Catching it early keeps the water outside.
Expansion joint sealing in Tinkers Cross, done properly
Internal floor joints take trolleys, pallet trucks and forklifts. Without a sound filler, joint edges chip and spall under load so the product has to suit both the traffic and the movement. We’ll tell you if the edges need repairing before sealing and phasing can keep areas working. The enquiries we see most involve car park joints leaking onto vehicles below and expansion joints split through the centre of the bead, on precast concrete panel joints, podiums and floor movement joints and brickwork movement joints. A specialist sealant contractor works differently from a general builder: in Tinkers Cross, that means joint design, primers and backing rod as standard.
In and around smaller places like Tinkers Cross, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and the quote explains what it covers.
- Location
- Tinkers Cross (SP6)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Places near Tinkers Cross
Other services in Tinkers Cross
Slabs, ramps and loading bays in Tinkers Cross
The 3 miles around Tinkers Cross take in at least three named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Tinkers Cross is in the South East, one of the UK’s drier regions. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in.
For an estate such as Fordingbridge Hospital (0.8 miles south of Tinkers Cross), the joints in ramps, decks and long building elevations all need attention over time. Schools such as Fordingbridge Junior School have movement joints in their walls and floors that are easy to overlook.
Tinkers Cross is in Hampshire. We cover Tinkers Cross and the rest of Hampshire, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 723 places in Hampshire. There’s a separate page for Southampton, roughly 18 miles from Tinkers Cross.
Business premises anywhere in SP6 are within our area. Buildings on Linguire Lane, Neave Road and Seton Way are within our area. Just outside Tinkers Cross, we also work in Lower Burgate (1 mile east), Fordingbridge (1 mile south), Upper Burgate (1 mile north-east), Horseport (1 mile south-east) and Criddlestyle (1 mile south-east). Bigger towns within reach include Totton (13 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south-east) and Marchwood (15 miles east).
Local landmarks in Tinkers Cross
In Tinkers Cross, that means premises near The Ship Inn and The Burgate School and Sixth Form. Nearby you’ll also find Fordingbridge Museum (0.8 miles south-east) and Godshill Castle Hill (1.5 miles east). Not far away are Blashford Lakes.
Do you need expansion joint sealing in Tinkers Cross?
Most movement joint failures come down to the joint stretching further than the sealant can take. Cohesive failure, a split through the centre, typically means the joint or product wasn’t right for the movement. Resealing like for like often fails the same way, so we check width and movement before quoting.
Common reasons buildings call us in:
- Arrises breaking up along floor joints
- Brittle, chalky sealant on external joints
- New sealant over old, now failing
- Movement joints with split or torn sealant
Warehouse floors on estates like Arch Farm Industrial Estate (less than half a mile south-east of Tinkers Cross) carry pallet trucks and forklifts over every saw-cut joint.
Before you book anyone
- How long is the guarantee, and what does it include?
- The named product and why it was chosen
- How the joint faces will be prepared and primed
- What site paperwork they can supply
Site staff or a sealant specialist?
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Questions we are asked in Tinkers Cross
Is Tinkers Cross too far out for you?
Not at all. Tinkers Cross is within our area. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Do you cover business parks and estates near Tinkers Cross, such as Arch Farm Industrial Estate?
Yes. We cover Tinkers Cross and the area around it, including industrial estates, business parks and retail parks such as Arch Farm Industrial Estate. Photos and a short description are enough for a first look.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.
Will you come and look before quoting?
Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit.
Which sealant will you use?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
What timescale should we allow for resealing expansion joints?
Allow a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. We confirm the timescale with the quote.
Do you take on small jobs?
Single areas, one-off repairs and whole buildings are all quoted the same way: send details, get a fixed quote, we seal, guaranteed.
Our process
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. Jobs in and around smaller places like Tinkers Cross are usually planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- We look at the joints, their width and how they’ve failed.
- You get a fixed quote with the product and its movement capability stated.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Primer goes on where the manufacturer specifies it, followed by the sealant, which is then tooled off.
- Each joint is inspected and handed over with our 12-month guarantee.
Preparing the site
- Tell staff and tenants when we will be in
- Have the specification and drawings to hand
- Arrange parking or a loading space
Getting a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
Read more
Leave it or put it right?
Patching the worst lengths of a joint can make sense short term. The remaining sealant is often close to failing too and repeated access costs add up. Where it helps, we quote both options. Converted and older buildings near places like Tinkers Cross tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- CSCS-carded applicators
- Workmanship guaranteed for 12 months
- Old sealant cut out, never sealed over
- Colours chosen to suit frames, cladding or finishes where possible
See how commercial sealant jobs are priced and our accreditations.
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.