Expansion and movement joint sealing in Temple Valley, Hampshire
Sealant work in Temple Valley for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- New sealant over old, now failing
- Chipped joint edges on forklift routes
- Debris jammed in movement joints
Expansion joint sealing near Temple Valley
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Signs you need expansion joint sealing in Temple Valley
When a bead pulls away from one face, it has lost adhesion. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons, and it’s common on joints sealed in a hurry.
If one of these sounds familiar, it’s time for a closer look:
- Car park joints leaking onto vehicles below
- Spalled or broken joint edges in floors and decks
- Rain penetration at brick or block movement joints
- Previous reseals laid over old sealant
University campuses such as University of Winchester, 3.7 miles to the west of Temple Valley, have car parks, paved walkways and building elevations with movement joints.
Questions to ask before you book
- Can the work be phased to keep areas open?
- The named product and why it was chosen
- Do they follow the manufacturer’s priming guidance?
- Are they CHAS accredited or on Constructionline?
How we handle expansion joint sealing in Temple Valley
A movement joint only works while its seal does. When the sealant splits or lets go, the gap fills with dirt and water. Resealing at the first signs of failure is far cheaper than repairing the material either side. Most enquiries involve leaks through car park deck joints onto the level below and expansion joints split through the centre of the bead, across blockwork control joints, car park decks and ramps and brickwork movement joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Temple Valley it comes down to the same thing: the right product in a properly prepared joint.
For a site near Temple Valley, measurements and photographs up front mean one trip where possible. Note joint widths and the traffic that uses them, and we will take it from there.
Every job we finish is backed by a 12-month workmanship guarantee, in Temple Valley as everywhere else we work. If our installation lets you down in that time, we return and fix it.
- Where
- Temple Valley (SO21)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Also near Temple Valley
More services for Temple Valley
Common questions from Temple Valley clients
Is Temple Valley too small for you to travel to?
No. Places such as Temple Valley are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Would you work within a site like Leigh House Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What site paperwork can you supply?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
Is movement joint sealing guaranteed?
Our workmanship on movement joints carries a 12-month guarantee. The guarantee covers how we sealed, not damage caused afterwards.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
How the quote is worked out
Each job is priced on its own details. The things that drive the figure:
- The product specified
- Removal of failed or old sealant
- How much there is to seal
- Induction, permit and paperwork requirements
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- How the joints are reached, and at what height
- When you need the work done
- The asbestos register, for older buildings
- The site address and postcode
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call 01277 525 020 or email a schedule or drawings to discuss it first.
Doing it in-house
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
How the job changes by surface
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement, and confirm it in the quote.
Podium joints
Podiums take foot traffic, planters and weather. We choose a product that copes with feet, wheels and weather.
Looking after the joints
To get the most from the new sealant:
- Brief car park operatives to protect joint lines during winter clearance
- Include every elevation and deck joint in periodic inspections
- Keep traffic off new joints until the cure time is up
- Avoid parking heavy plant or pallets on joint lines
Fresh joint sealant needs its full cure time before it takes traffic or water. The time varies with product, conditions and joint depth. Barriers left in place until then protect the finish.
A failed deck joint lets water straight through to the level below. Salty water dripping through stains soffits and lands on parked vehicles, which is bad news for the concrete and the people parking below. Resealing early limits the damage.
Joints that move: notes for Temple Valley
Temple Valley lies roughly 58 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift. Rainfall across the South East, Temple Valley included, is lower than in many parts of the UK. Even so, yard and car park joints are only sealed when they’re dry and clean, while winter salting gets into any joint left open.
Another example is Winchester Trade Park (2.4 miles west of Temple Valley), where floors and yards would be done in stages around the occupiers. Hospitals like Leigh House Hospital (to the west of Temple Valley) have multi-storey or surface car parks whose joints carry vehicles round the clock.
Temple Valley is about 3 miles east of Hyde, in Hampshire. If you’re looking for expansion joint sealing in Temple Valley, we can help. We work across 723 places in Hampshire, large and small. Sites around Southampton have their own page, roughly 12 miles from Temple Valley.
If you need expansion joint sealing in SO21, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Just outside Temple Valley, we also work in Easton (2 miles north-west), Winnall (2 miles west), Morestead (2 miles south-west), Ovington (2 miles north-east) and Itchen Abbas (2 miles north). A short drive away, we cover Winchester (3 miles west), Eastleigh (8 miles south-west), Fareham (14 miles south), Andover (15 miles north-west), Horndean (15 miles south-east) and Totton (15 miles south-west).
Local landmarks in Temple Valley
The closest station to Temple Valley is Winchester station, roughly 3.4 miles west. A little further out are Winchester College Treasury (3 miles west) and Wolvesey Castle (2.9 miles west). The countryside around Temple Valley includes Winnall Moors and Twyford Down.
Diagnose, treat, sign off
Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Smaller jobs around Temple Valley can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- First the joints are inspected, widths measured and the type of failure noted.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Getting the site ready
- Move anything stored against the joints
- Agree which areas must stay open
- Share your working hours and any access restrictions
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, phone 01277 525 020 or email us.