Expansion and movement joint sealing in Soldridge, Hampshire
Expansion and movement joint sealing in walls, decks and floors in Soldridge and across Hampshire. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Previous reseals laid over old sealant
- Spalled or broken joint edges in floors and decks
- Debris jammed in movement joints
Expansion joint sealing for Soldridge sites
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Aftercare for building managers
Cleaning and maintenance staff play a part too. Pass these on to them:
- Put movement joints on the planned maintenance inspection round
- Act on the first tear or lifting edge rather than waiting
- Record the sealant used and the date in the O&M file
- Plan racking layouts so feet don’t land on a joint
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint and we will tell you when each bay or area can reopen. Keeping the area coned off until then avoids tyre marks and damage.
Once debris packs a failed joint, the structure has nowhere to expand. The edges then take the pressure and start to spall. Keeping the seal sound avoids all of that.
About our expansion joint sealing in Soldridge
Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. Every one calls for a sealant picked for its movement, exposure and traffic and we name it in the quote. We work on cladding panel joints, precast concrete panel joints and car park decks and ramps, and the usual reasons a site gets in touch are weathered movement joint sealant that no longer flexes and damp inside where a wall movement joint has failed. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Soldridge it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Halls, schools and small commercial buildings near places like Soldridge have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Soldridge (GU34)
- Wider area
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class, which is what makes a joint last.
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Leave it or put it right?
Patching the worst lengths of a joint can make sense short term. The remaining sealant is often close to failing too and repeated access costs add up. We can price a patch and a full reseal side by side. For buildings around smaller places like Soldridge, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What you get with us
- Fully insured
- Colour options checked against the specified product
- Clear, fixed quotes
- RAL and finish matching where the product range allows
Take a look at how commercial sealant jobs are priced or our accreditations.
Joints that move: notes for Soldridge
Soldridge has at least three named business or industrial parks inside a 3-mile radius. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. Soldridge is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in.
Hospital campuses such as Alton Community Hospital (to the north-east of Soldridge) grow in stages, leaving movement joints wherever new blocks meet old. Phasing is what makes joint work possible on busy sites such as Mansfield Business Park (1.1 miles east of Soldridge): one bay, aisle or car park row at a time. For buildings at a park such as Lower Soldridge Business Park, under half a mile to the north-east of Soldridge, brick and panel movement joints are easy to forget until one leaks.
Soldridge is about 5 miles south-west of Alton, in Hampshire. Across the GU34 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 723 places across Hampshire fall within our area, including Soldridge. There’s a separate page for Southampton, about 19 miles away.
Postcode districts covered here: GU34 for movement joints. Buildings on Upper Soldridge Road, Rookwood Lane and Soldridge Road are within our area for movement joints. Close to Soldridge, our area also takes in Medstead (1 mile north-east), Four Marks (1 mile east), South Town (1 mile north), Hattingley (2 miles north) and New Copse (2 miles north). A short drive away, we cover Basingstoke (11 miles north), Winchester (11 miles west), Eastleigh (15 miles south-west), Fleet (15 miles north-east), Horndean (14 miles south) and Alton (5 miles north-east).
Near you in Soldridge
Well-known places in the area include Alton Community Hospital (4.1 miles north-east) and Barton Castle (2.7 miles north-west). Not far away are Red Hill.
Also near Soldridge
Also in Soldridge
How the job changes by surface
Concrete and precast panel joints
Precast panels often have surface residues that sealant won’t bond to. Proper cleaning and primer where specified give a sound bond, so the new seal holds.
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You’ll hear from us if the cause turns out to be any of the following:
- Changing the joint layout or spacing of a structure
- Cracking or settlement that calls for an engineer’s assessment
- Crumbling edges that would give a new bead nothing sound to grip
If you are not sure, just give us a call on 01277 525 020 or email a schedule or drawings and we will give you a straight answer.
Joints and surfaces we work on
- Precast concrete panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Brickwork movement joints
- Cladding panel joints
- Blockwork control joints
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint. If an area should be left alone while the sealant cures, we say how long and put signs out. Jobs in and around smaller places like Soldridge are normally planned as a single visit, so photographs and measurements up front really help. That way the right products come on the day.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Getting the site ready
- Tell us which areas need to stay in use
- Share the asbestos register for older buildings
- Confirm the product named in the specification
Request a quote
Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or use the quote form.
Read more
Soldridge: questions and answers
Can you take on a job at a hospital such as Alton Community Hospital?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Can you work at a site such as Lower Soldridge Business Park, by Soldridge?
Yes. Estates, retail parks and business parks around Soldridge, Lower Soldridge Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Are you CHAS accredited and on Constructionline?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
Can you seal joints in cold or wet weather?
The joint has to be dry, and the air and surface temperature inside the product’s limits. Frost, rain and condensation on steel or concrete can hold up external work, so we plan with the forecast in mind.
What causes movement joint sealant to fail?
Most often the movement is too much for the product or the joint width. That’s why we check width, depth and movement class before quoting so the same failure isn’t repeated.
What timescale should we allow for resealing expansion joints?
Allow a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Timings are set out in the quote.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.